172883 | Eaton PSG power supply unit

Tehnilised andmed Abiinfo Tugi

General specifications

Product Name	Eaton PSG power supply unit
Catalog Number	172883
EAN	4015081694716
Product Length/Depth	117 mm
Product Height	121 mm
Product Width	50 mm
Product Weight	0.65 kg
Certifications	Protection against electric shock: DIN 57100-410 2014/30/EU ITE: EN 55022, EN 61000-3-2, EN 61000-3-3, EN 55024 Electrical equipment of machines: IEC60204-1 (Overvoltage category III) Class2: UL1310 and CSA-C22.2 No. 223 RoHS SELV (EN 60950) EN 50178/IEC 62103 EN 55011 2014/35/EU Electrical Safety (of IT equipment) : SIQ to EN60950-1, UL/c-UL recognized to UL 60950-1, CSA-C22.2 No. 60950-1, CB scheme to IEC 60950-1 IEC/EN 61204-3 Mains harmonics limitation: EN 601000-3-2 PELV (EN 60204) UL 508 IEC Rated CSA Std. C22.2 EN Listed EAC
Model Code	PSG120F24RM

Features & Functions

Electric connection type	Screw connection
Enclosure material	Aluminum
Features	Mains overvoltage protection (against internal overvoltage) Output voltage stabilized Short-circuit-proof Modular version Stabilized
Fitted with:	Not accessible internal input fuse (T3.15 AH/500 V, 600 V) for device protection
Functions	Transient overvoltage protection (varistor) Secondary voltage adjustable
Number of phases	3

General

Degree of Protection	IP20 NEMA 1
Environmental class	3K3 (Climatic class, according to EN 60721)
Mounting Method	Rail mounting possible
Pollution degree	2
Product category	Power supply
Connection	L1 +, L2 –, L3 nc, PE ㊏, Input characteristics, DC duty L1 +, L2 nc, L3 –, PE ㊏, Input characteristics, DC duty
Connection type	Screw connection
LED indicator	Status indication of "DC OK": Green LED
Power consumption	200 VA
Rated operational current (Ie)	Max. 0.5 A at 3 x 400 V AC Max. 0.4 A at 3 x 500 V AC

Ambient conditions, mechanical

Shock resistance	30 g (300 m/s²) in all directions, Mechanical, According to IEC/EN 60068-2-27
Vibration resistance	10 - 500 Hz at 30 m/s² (3 G max ) for 60 min. in X-axis, Y-axis, Z-axis directions, (IEC/EN 60068-2-6)

Climatic environmental conditions

Ambient operating temperature - min	-25 °C
Ambient operating temperature - max	80 °C
Ambient storage temperature - min	-25 °C
Ambient storage temperature - max	85 °C
Climatic proofing	< 95 % relative humidity at +25 °C, no condensation

Terminal capacities

Terminal capacity (flexible with ferrule)	Primary side: 0.82 - 3.3 mm² Secondary side: 0.82 - 3.3 mm²
Terminal capacity (flexible with ferrule AWG)	Primary side: 18 - 12 Secondary side: 18 - 12
Stripping length (main cable)	7 mm
Tightening torque	0.9 Nm, Screw terminals, Primary side 0.6 Nm, Screw terminals, Secondary side

Safety

Protection class	1 (with PE connection)
Current limitation	Overcurrent = 150 % of max. output power, at short-circuit, safety and safety features
Insulation resistance	1.5 kV AC (output) 4 kV AC (input/output) 2 kV AC (input)
Mean time between failures (MTBF)	> 500,000 h

Input characteristics

Input voltage at AC 50 Hz - min	320 V
Input voltage at AC 50 Hz - max	600 V
Input voltage at DC - min	450 V
Input voltage at DC - max	800 V
Inrush current	Voltage source up to 18 kVA: < 60 A with 3 x 400 V AC & 3 x 500 V AC (Inrush current limitation I²t (+25 °C)) Voltage source up to 3 kVA: < 30 A with 3 x 400 V AC & 3 x 500 V AC (Inrush current limitation I²t (+25 °C))
Leakage current at ground IPE - max	< 3.5 mA (at 500 V AC)
Mains failure bridging	> 20 ms (with 3 x 400 V AC) > 40 ms (with 3 x 500 V AC)
Ramp/run-up time	< 1000 ms
Short-term interruption	100% voltage dip, 1 cycle (20 ms at 50 Hz), automatic start, Input characteristics
Supply frequency	63 Hz, Input, max. Range 47 Hz, Input, min. Range 50/60 Hz, Input, Rated value
Supply voltage at AC, 50 Hz - min	320 VAC
Supply voltage at AC, 50 Hz - max	600 VAC
Supply voltage at DC - min	0 VDC
Supply voltage at DC - max	0 VDC
Tripping characteristic	B

Output characteristics

Residual ripple	< 50 mV / < 150 mV
Capacitive load	10000 µF max. Capacitive load starting, Output characteristics
Efficiency	> 87 % (3 x 400 V AC) > 86 % (3 x 500 V AC)
Output	Parallel switching for redundancy, with O ring diode (PSG480R24RM/PSG960R24RM)
Output current at AC, 50 Hz - max	5 A
Output voltage	24 V
Output voltage at DC - min	24 V
Output voltage at DC - max	28 V
Rated output power	120 W
Voltage tolerance	± 2 %, Rated output voltage

Design verification

Equipment heat dissipation, current-dependent Pvid	0 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Rated operational current for specified heat dissipation (In)	0 A
Static heat dissipation, non-current-dependent Pvs	16.5 W
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Meets the product standard's requirements.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.