MyEatonin usein kysytyt kysymykset
Eaton Moeller series T3 Control switch, 32 A, Rear mounting, 1 contact unit(s), Contacts: 2, Design: 15511
| Product Name |
Eaton Moeller® series T3 Control switch
|
| Catalog Number |
016581
|
| EAN |
4015080165811
|
| Product Length/Depth |
51 mm
|
| Product Height |
54 mm
|
| Product Width |
61 mm
|
| Product Weight |
0.11 kg
|
| Certifications |
CE
|
| Fitted with: |
Retraction in 0-position
0 (off) position |
| Number of poles |
Two-pole
|
| Degree of protection (front side) |
IP00
NEMA Other |
| Mounting method |
Rear mounting
|
| Mounting position |
As required
|
| Number of contact units |
1
|
| Overvoltage category |
III
|
| Pollution degree |
3
|
| Suitable for |
Ground mounting
Intermediate mounting Front mounting |
| Switching angle |
90 °
|
| Type |
Control switch
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
50 °C
|
| Ambient operating temperature (enclosed) - min |
-25 °C
|
| Ambient operating temperature (enclosed) - max |
40 °C
|
| Climatic proofing |
Damp heat, cyclic, to IEC 60068-2-30
Damp heat, constant, to IEC 60068-2-78 |
| Rated operating voltage (Ue) at AC - max |
690 V
|
| Rated uninterrupted current (Iu) |
32 A
|
| Short-circuit protection rating |
35 A gG/gL, Fuse, Contacts
|
| Control circuit reliability |
1 failure per 100,000 switching operations statistically determined, at 24 V DC, 10 mA)
|
| Number of contacts |
2
|
| Actuator type |
Toggle
|
| Number of switch positions |
2
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
UV resistance only in connection with protective shield.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Lähetä sähköpostia
Tuotteen tekniset tiedot
