Heat containment system (HCS)

Eaton’s Heat Containment System (HCS) is a simple, scalable and off-set active and/or passive chimney solution that effectively manages the ever increasing heat loads in today’s data center.

The HCS contains and directs the heat exhaust of your IT equipment to the top rear of the enclosure where it is ducted to your cooling equipment through plenum ceilings or high air returns. This patented design adapts to your Paramount, Vantage S2 and several third-party enclosures and integrates seamlessly into your existing cooling infrastructure.

Able to adapt to existing infrastructures to increase rack utilization as your capacity demands grow
Separates hot exhaust air and cold supply air; dramatically increasing the reliability of the data center
Allows hotter air to return directly to the CRACs, increasing their efficiency by operating at a higher Delta T (ΔT)
Helps extend existing cooling capacity throughout the data center; freeing up stranded assets and lowering operational costs
Does not require you to alter existing enclosure locations and is also field-installable on third-party enclosures
Flexible return duct integrates with the HCS for enclosures that are off grid from drop ceilings, where obstacles preclude the use of chimneys or when uneven ceilings exist throughout the data center

Telescopic chimney (TC)

The Eaton Telescopic Chimney (TC) is a simple, scalable and straight passive chimney solution that effectively manages the ever increasing heat loads in today’s data center.

The passive TC system combined with Paramount Enclosure components creates a vertical channel that directs the heat exhaust of IT equipment to your cooling equipment through plenum ceilings. Hot air isolation at the enclosure level allows you to increase rack densities and maximize cooling efficiencies.

Stable passive system with no electronic components
Retrofit capability with Paramount Enclosures
Ease of installation with four fasteners to adjust height
Shorter install time
Large range of height options for varying ceiling heights
Infinite adjustability options within height selection
Energy efficient solution maximizes cooling capacity by separating hot air exhaust and cool air intake

Airflow solutions for switches and network devices

Eaton offers several solutions for devices with (non) front-to-rear airflow architecture

Cisco 7018 Switch Enclosure

Features a specialized airflow containment design that is compliant with the Cisco Nexus 7000 Series switch site preparation guide
Includes pre-installed switch brackets
Allows the switch assembly to be mounted facing the front or rear of the enclosure
Resolves the difficult issue of how to mount a switch with unique airflow requirements
Includes integrated cable management
Helps eliminate overheating of network racks and other nearby equipment by maintaining front to rear airflow
Improves efficiency by preventing cold air from mixing with hot air

Paramount conversion Kits for Cisco Switches

Integrated air seal panels to convert side-to-side into front-to-back airflow
Vertical lacing bars for managing large bundles of data cables
Pre-installed adjustable chassis support brackets for supporting heavy switches

Blanking panels

Blanking panels provide a quick, easy and cost-effective solution to optimize air circulation within an enclosure while maintaining high aesthetics.

Significantly reduces re-circulation of hot exhaust air to the equipment inlet
Adds to the overall aesthetics of the data center
Wide range of heights from 1U to 22U depending on style
EIA-310-D compliant for 19" equipment
Available in tool-less, mechanically fastened and cable pass through styles

Spesifikasi

Telescopic chimney – technical specifications

Compatibility:	Eaton Paramount Enclosures
Construction:	20G sheet steel
Height options:	12” to 76”
Mounting:	Adjustable heights with four fasteners. Ceiling threaded rod mounting capability as required

Telescopic Chimney Models

Part Number	Height Adjustment (in.)		Width (in.)	Depth (in.)	Weight (lb.)
	Min.	Max.
EXTTC1219	12	19	23	19.5	30
EXTTC1728	17	28	23	19.5	39
EXTTC2645	26	45	23	19.5	56
EXTTC4376	43	76	23	19.5	87

Telescopic Chimney Paramount Top Panel Options

Part	Width (in.)	Depth (in.)
JTPTC2440	24	45
JTPTC3040	30	40
JTPTC2445	24	45
JTPTC3045	30	45

Telescopic Chimney Paramount Top Panel Filler

Part	Width (in.)	Depth (in.)
JTPTCFP	22	19.5

Paramount Solid Rear Doors (for use with TC)

Part	Door Type	RU Height	Width
JDDS7724	Split Rear Door	40	24
JDDS7730	Split Rear Door	40	30
JDDS8124	Split Rear Door	42	24
JDDS8130	Split Rear Door	42	30
JDDS8424	Split Rear Door	44	24
JDDS8430	Split Rear Door	44	30
JDDS9124	Split Rear Door	48	24
JDDS9130	Split Rear Door	48	30
JDDS9624	Split Rear Door	51	24
JDDS9630	Split Rear Door	51	30
JDS7724LR	Solid Left Hand and Right Hand Rear Door	40	24
JDDS7730LR	Solid Left Hand and Right Hand Rear Door	40	30
JDDS8124LR	Solid Left Hand and Right Hand Rear Door	42	24
JDDS8130LR	Solid Left Hand and Right Hand Rear Door	42	30
JDDS8424LR	Solid Left Hand and Right Hand Rear Door	44	24
JDDS8430LR	Solid Left Hand and Right Hand Rear Door	44	30
JDDS9124LR	Solid Left Hand and Right Hand Rear Door	48	24
JDDS9130LR	Solid Left Hand and Right Hand Rear Door	48	30
JDDS9624LR	Solid Left Hand and Right Hand Rear Door	51	24
JDDS9630LR	Solid Left Hand and Right Hand Rear Door	51	30

Heat containment system (HCS) flexible return duct option

The flexible return duct integrates with the HCS for enclosures that are off grid from drop ceilings, where obstacles preclude the use of chimneys or where uneven ceilings exist throughout a data center.

A simple interface easily connects to the top of the heat containment system chimney. Flexible 10" ducts are clamped to the interface and a 2’ X 2’ ceiling tile, which is mounted to the plenum ceiling to create a closed loop system.

The HCS ducting system is designed to fit on HCS chimney bases, part numbers HCS24001B and HCS30001B.

The ducting system is more economical than a custom heating, ventilation and air conditioner (HVAC) installation and helps create a predictable environment while increasing computer room air conditioning (CRAC) unit efficiency.

Ducting is V-0 rated and self extinguishing
Ceiling tile is available in Nugrey to match existing tiles
Ducting can be cut in the field for custom fits
Each duct comes with four clamps
Ducts are positioned directly over the fan for maximum airflow

Cisco 7018 Switch Enclosure and Paramount Conversion Kits for Cisco Switches

Part Number	Cisco Model	Converts Paramount Model
6509CVK42UPM	Catalyst 6509-E	PMT423042H or PMT423048H
6509CVK44UPM	Catalyst 6509-E	PMT443042H or PMT443048H
6509CVK48UPM	Catalyst 6509-E	PMT483042H or PMT483048H
6509CVK51UPM	Catalyst 6509-E	PMT513042H or PMT513048H
6513CVK42UPM	Catalyst 6513	PMT423042H or PMT423048H
6513CVK44UPM	Catalyst 6513	PMT443042H or PMT443048H
6513CVK48UPM	Catalyst 6513	PMT483042H or PMT483048H
6513CVK51UPM	Catalyst 6513	PMT513042H or PMT513048H
9513CVK42UPM	MDS 9513	PMT423042H or PMT423048H
9513CVK44UPM	MDS 9513	PMT443042H or PMT443048H
9513CVK48UPM	MDS 9513	PMT483042H or PMT483048H
9513CVK51UPM	MDS 9513	PMT513042H or PMT513048H
7010CVK42UPM	Nexus 7010	PMT423048H
7010CVK44UPM	Nexus 7010	PMT443048H
7010CVK48UPM	Nexus 7010	PMT483048H
7010CVK51UPM	Nexus 7010	PMT513048H

Plastic Blanking Panel Options (for tapped/square holes)

Part Number	Height	Quantity
PBP1U10	1U	10
PBP1U100	1U	100
PBP1U500	1U	500
PBP2U10	2U	10
PBP2U100	2U	100
PBP2U500	2U	500
PBP8U10	8U	10
PBP8U100	8U	100
PBP8U500	8U	500

Steel Blanking Panels

Mechanically Fastened

Part Number	Height	Quantity
V319F01U10BLK	1U	10
V319F01UBLK	1U	50
V319F01U100BLK	1U	100
V319F02U10BLK	2U	10
V319F02U100BLK	2U	100
V319F05U10BLK	5U	10
V319F05U100BLK	5U	100

Tool-less

Part Number	Height	Quantity
FP1901U10BLK	1U	10
FP1901UBLK	1U	50
FP1901U100BLK	1U	100
FP1902U10BLK	2U	10
FP1902U100BLK	2U	100
FP1905U10BLK	5U	10
FP1905U100BLK	5U	100

Cable Pass-thru Blanking Panels with Brush Strip (tool-less)

Part Number	Height	Quantity
CMBPBRSH1U	1U	1
CMBPBRSH2U	2U	1

Adjustable Blanking Panel Options

Part Number	Height	Mounting
SBP1222USQ	12-22U	Square
SBP1222UTPD	12-22U	Tapped
SBP712USQ	7-12U	Square
SBP712UTPD	7-12U	Tapped

Tautan Unduh

Application notes

Powering Nutanix–based Dell XC Web-Scale

(PDF 1 MB , 25/05/2021)

Brosur

Blanking Panels Datasheet

(PDF 389 KB , 30/10/2019)
Eaton Telescopic Chimney Datasheet

(PDF 228 KB , 30/10/2019)

Catalogs

Full data and communications catalog

Server and network solutions catalog

(PDF 45 MB , 04/06/2025) Diperbarui

Rack containment