문서 다운로드 () / 20
이메일 전송
다운로드
다운로드 한도를 초과했습니다.
Eaton Moeller® series RS Safety switch, RS, 1 N/O, 2 NC, Reed contacts, Ue 24 V DC, -10 - +55 °C, Plastic, 3 m connection cable, Sn 8 - 19 mm
| Product Name |
Eaton Moeller® series RS Safety switch
|
| Catalog Number |
177288
|
| Model Code |
RS2-12-C3
|
| EAN |
4015081717415
|
| Product Length/Depth |
52 mm
|
| Product Height |
13 mm
|
| Product Width |
26 mm
|
| Product Weight |
0.182 kg
|
| Certifications |
IEC 62061
ISO 14119 CE UL CSA File No.: UL report applies to both US and Canada UL Category Control No.: NRKH, NRKH7 Certified by UL for use in Canada UL File No.: E166051 EN ISO 13849 |
| Catalog Notes |
Reed contacts
|
| Electric connection type |
With cable preassembled
|
| Enclosure material |
Plastic
|
| Material |
Plastic
|
| Connection type |
3 m connection cable
|
| Degree of protection |
IP67
NEMA Other |
| Product category |
Non-contacting safety switch
|
| Rated switching distance (Sn) - min |
8 mm
|
| Rated switching distance (Sn) - max |
19 mm
|
| Repetition accuracy |
≤ 10 % (deviation)
|
| Suitable for |
Safety functions
|
| Type |
Safety position switch
|
| Mounting position |
As required
|
| Shock resistance |
30 g, Shock duration 11 ms, Half-Sinusoidal
|
| Vibration resistance |
0 - 2000 Hz, 1 mm
|
| Ambient operating temperature - min |
-10 °C
|
| Ambient operating temperature - max |
55 °C
|
| Relative humidity |
90 % (at 55 °C)
|
| Terminal capacity (AWG) |
22
|
| Rated operational current (Ie) at AC-15, 220 V, 230 V, 240 V |
0 A
|
| Rated operational current (Ie) at AC-15, 24 V |
0 A
|
| Rated operational current (Ie) at DC-13, 125 V |
0 A
|
| Rated operational current (Ie) at DC-13, 220 V, 230 V |
0 A
|
| Rated operational current (Ie) at DC-13, 24 V |
0.3 A
|
| Rated operational voltage |
24 V DC
|
| Number of contacts (change-over contacts) |
0
|
| Number of contacts (normally closed contacts) |
2
|
| Number of contacts (normally open contacts) |
1
|
| Explosion safety category for gas |
None
|
| Explosion safety category for dust |
None
|
| Safety parameter (EN ISO 13849-1) |
20,000,000 switching cycles, B10d
PL e, Performance level |
| Safety parameter (IEC 62061) |
SIL: 3
|
| Equipment heat dissipation, current-dependent Pvid |
0 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
제품 사양
