289169

General specifications

Product Name	Eaton XC Modular PLC
Catalog Number	289169
EAN	4015082891695
Product Length/Depth	100 mm
Product Height	100 mm
Product Width	60 mm
Product Weight	0.28 kg
Certifications	CSA File No.: 012528 IEC/EN 61131-2 CSA CE CSA-C22.2 No. 0-M UL CSA Class No.: 2252-01 UL508 CSA-C22.2 No. 142-M EN 50178 UL File No.: E135462 UL Category Control No.: NRAQ EAC

Features & Functions

Features	Asynchronous, cyclic, acyclic PDO types (CANopen®) Mains filter (power supply) Mains overvoltage protection (power supply) Expandable with XI/OC expansions Short-circuit protection (power supply)
Fitted with:	Real time clock Optical interface
Functions	Overvoltage protection Additional program memory possible
Processor	Infineon C164

General

Accessories	Order terminal clamps, module rack and battery separately.
Battery runtime	5 years typ.
Connection type	Plug-in terminal block Optical interface, , CANopen® Plastic fibre with 660 mm wave length, plug e.g. HFBR-4516 Agilent Technologies RJ45, Ethernet
Degree of protection	IP20
Model	Modular
Mounting method	Wall mounting/direct mounting Rack-assembly possible Rail mounting possible
Overvoltage category	II
Pollution degree	2
Potential isolation	CANopen®: yes Power supply of local inputs/outputs (24 V/0 V) against CPU voltage: yes
Rated insulation voltage (Ui)	500 V
Residual ripple	≤ 5 %
Voltage type	DC

Ambient conditions, mechanical

Mounting position	Horizontal
Shock resistance	15 g, Mechanical, Shock duration 11 ms
Vibration resistance	57 - 150 Hz, ± 1.0 g 10 - 57 Hz, ± 0.075 mm

Climatic environmental conditions

Air pressure	795 - 1080 hPa (operation)
Ambient operating temperature - min	0 °C
Ambient operating temperature - max	55 °C
Ambient storage temperature - min	-25 °C
Ambient storage temperature - max	70 °C
Relative humidity	10 - 95 % (non-condensing)

Electro magnetic compatibility

Emitted interference	Class A (according to EN 50081-2)
Interference immunity	According to EN 50081-2

Terminal capacities

Terminal capacity (flexible with ferrule)	0.5 - 1.5 mm², Screw terminals
Terminal capacity (flexible)	0.34 - 1.0 mm², Spring-loaded terminals
Terminal capacity (solid)	0.5 - 2.5 mm², Screw terminals 0.14 - 1.0 mm², Spring-loaded terminals

Power supply

Input power	26 W
Input voltage	24 V DC (Power supply of local inputs/outputs) 24 V DC (Power supply)
Input current	3.5 mA (per channel at nominal voltage, Digital inputs)
Output current	3.2 A
Output voltage	5 V DC (signal module)
Power loss	Normally 85 mW 6 W
Repetition rate	1 s
Residual ripple	≤ 5 %
Supply voltage	20.4 - 28.8 V DC
Supply voltage at AC, 50 Hz - min	0 VAC
Supply voltage at AC, 50 Hz - max	0 VAC
Supply voltage at DC - min	20.4 VDC
Voltage dips	10 ms
Supply voltage at DC - max	28.8 VDC
Inrush current	No limitation (limited only by upstream 24 V DC power supply unit)

Communication

Bus termination	External, CANopen®
Connection type	Plug-in terminal block Optical interface, , CANopen® Plastic fibre with 660 mm wave length, plug e.g. HFBR-4516 Agilent Technologies RJ45, Ethernet
Cycle time	< 0.5 ms, for 1 k of instructions (Bit, Byte), memory
Data transfer rate	57.6 kBit/s, Serial interface (RS232) without handshake lines 0,5 MBit/s, CANopen®
Interfaces	RS232 (built-in) CANopen® (FO cable) (built-in)
Memory	128 kByte Program memory code, optional extension 8 kByte Marker Memory 128 kByte Program data code, optional extension 8 kByte Retain Memory 128 kByte (User memory)
Number of modules	Max. 126 (CANopen)
Operating mode	Watchdog
Protocol	CAN SUCONET Other bus systems MODBUS PROFIBUS CANopen® (To DS 301 V4)

Input/Output

Delay time	0.1 ms typ., Digital inputs 24 V DC, Delay time from 1 to 0, Debounce OFF 0.1 ms typ., Output delay, On -> Off 0.1 ms typ., Digital inputs, Delay time from 0 to 1, Debounce OFF
Duty factor	100 %, Digital outputs
Input current	3.5 mA (per channel at nominal voltage, Digital inputs)
LED indicator	Status indication of digital inputs: LED
Limit value type 1	Low: < 5 V DC High: > 15 V DC
Making/breaking delay	0.1 ms
Number of channels	6
Number of inputs (analog)	0
Number of inputs (digital)	8
Number of outputs	6 (transistor outputs)
Number of outputs (analog)	0
Number of outputs (digital)	6
Number of relay outputs	0
Rated operational current (Ie)	0.5 A at AC-3, 230 V
Signal range	19.2 - 30 V DC (Power supply of local inputs/outputs, note polarity)
Switching capacity	IEC/EN 60947-5-1, utilization category DC-13, Digital outputs
Utilization factor	1 (Inductive load to EN 60947-5-1, Without external suppressor circuit, T0.95 = 1 ms, R = 48 Ω, L = 16 mH)

Safety

Explosion safety category for gas	None
Potential isolation	CANopen®: yes Power supply of local inputs/outputs (24 V/0 V) against CPU voltage: yes
Protection against polarity reversal	Yes Yes, for AS-Interface
Explosion safety category for dust	None

System

Memory	128 kByte Program memory code, optional extension 8 kByte Marker Memory 128 kByte Program data code, optional extension 8 kByte Retain Memory 128 kByte (User memory)
Memory capacity	128 kByte

Design verification

Equipment heat dissipation, current-dependent Pvid	0.08 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Rated operational current for specified heat dissipation (In)	0 A
Static heat dissipation, non-current-dependent Pvs	6 W
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Meets the product standard's requirements.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.