Eaton Moeller® series Rapid Link Flat cable outgoer, for 400VAC, +24VDC
| Product Name |
Eaton Rapid Link Flexible busbar junction
|
| Catalog Number |
290188
|
| Model Code |
RA-C1-PLF
|
| EAN |
4015082901882
|
| Product Length/Depth |
119 mm
|
| Product Height |
53 mm
|
| Product Width |
57.5 mm
|
| Product Weight |
0.134 kg
|
| Certifications |
EN 60998-2-3
IEC/EN 60529 |
| Catalog Notes |
Insulation piercing terminals, terminal socket with lock mechanism
|
| Accessory/spare part type |
Connection technique
|
| Degree of protection |
IP65, according to IEC/EN 60529
|
| Product category |
Accessories
|
| Type |
Connection socket (for power connection cable)
|
| Mounting position |
As required
|
| Ambient operating temperature - min |
-30 °C
|
| Ambient operating temperature - max |
55 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Ambient storage temperature - max |
70 °C
|
| Rated operational current (Ie) |
20 A
|
| Rated operational voltage (Ue) at DC - max |
24 V
|
| Rated operational voltage (Ue) at AC - max |
500 V
|
| Contact type |
IDC termination
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Send email
Product specifications
