Eaton DA1 Variable frequency drive, 400 V AC, 3-phase, 302 A, 160 kW, IP55/NEMA 12, Radio interference suppression filter, OLED display, DC link choke
| Product Name |
Eaton DA1 Variable frequency drive
|
| Catalog Number |
169217
|
| EAN |
4015081656844
|
| Model Code |
DA1-34302FB-B55C
|
| Product Length/Depth |
341 mm
|
| Product Height |
1280 mm
|
| Product Width |
330 mm
|
| Product Weight |
80 kg
|
| Certifications |
RCM
UL UL File No.: E172143 CSA-C22.2 No. 14 DNV IEC/EN 61800-3 IEC/EN61800-5 CE CUL Safety: EN 61800-5-1: 2003 UkrSEPRO IEC/EN61800-3 UL Category Control No.: NMMS, NMMS7 RoHS, ISO 9001 Certified by UL for use in Canada Specification for general requirements: IEC/EN 61800-2 UL 508C UL report applies to both US and Canada EAC |
| Catalog Notes |
The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request.
|
| Cable length |
C3 ≤ 25 m, Radio interference level, maximum motor cable length
100 m, screened, maximum permissible, Motor feeder 200 m, screened, with motor choke, maximum permissible, Motor feeder C2 ≤ 5 m, Radio interference level, maximum motor cable length 150 m, unscreened, maximum permissible, Motor feeder 300 m, unscreened, with motor choke, maximum permissible, Motor feeder |
| Communication interface |
Modbus-TCP, optional
Ethernet IP, optional DeviceNet, optional PROFIBUS, optional SmartWire-DT, optional Modbus RTU, built in CANopen®, built in EtherCAT, optional PROFINET, optional OP-Bus (RS485), built in |
| Connection to SmartWire-DT |
In conjunction with DX-NET-SWD1 SmartWire DT module
Yes |
| Degree of protection |
IP55
NEMA 12 |
| Electromagnetic compatibility |
1st and 2nd environments (according to EN 61800-3)
|
| Fitted with: |
Control unit
Brake chopper Internal DC link PC connection Breaking resistance IGBT inverter OLED display Radio interference suppression filter Additional PCB protection DC link choke |
| Frame size |
FS7
|
| Functions |
4-quadrant operation possible
|
| Mounting position |
Vertical
|
| Product Category |
Variable frequency drives
|
| Protection |
Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
|
| Protocol |
EtherNet/IP
PROFIBUS CAN MODBUS DeviceNet PROFINET IO Other bus systems TCP/IP |
| Safety function/level |
STO (Safe Torque Off, SIL2, PLc Cat 2)
|
| Suitable for |
Branch circuits, (UL/CSA)
|
| Radio interference class |
C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.
Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments |
| Ambient operating temperature - min |
-10 °C
|
| Altitude |
Max. 4000 m
Max. 1000 m Above 1000 m with 1 % derating per 100 m |
| Ambient operating temperature - max |
40 °C
|
| Ambient operating temperature at 150% overload - min |
-10 °C
|
| Ambient operating temperature at 150% overload - max |
40 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Ambient storage temperature - max |
60 °C
|
| Climatic proofing |
< 95 average relative humidity (RH), no condensation, no corrosion
|
| Efficiency |
98.1 % (η)
|
| Heat dissipation at current/speed |
1000 W at 25% current and 0% speed
1000 W at 25% current and 50% speed 1230 W at 50% current and 0% speed 1400 W at 50% current and 50% speed 1850 W at 50% current and 90% speed 2420 W at 100% current and 0% speed 3140 W at 100% current and 50% speed 3600 W at 100% current and 90% speed |
| Input current ILN at 150% overload |
307.8 A
|
| Leakage current at ground IPE - max |
4.75 mA
|
| Mains switch-on frequency |
Maximum of one time every 30 seconds
|
| Mains voltage - min |
380 V
|
| Mains voltage - max |
480 V
|
| Operating mode |
Speed control with slip compensation
Optional: Vector control with feedback (CLV) U/f control Sensorless vector control (SLV) |
| Output frequency - min |
0 Hz
|
| Output frequency - max |
500 Hz
|
| Output voltage (U2) |
480 V AC, 3-phase
400 V AC, 3-phase |
| Overload current IL at 150% overload |
453 A
|
| Rated control supply voltage |
10 V DC (Us, max. 10 mA)
|
| Rated frequency - min |
48 Hz
|
| Rated frequency - max |
62 Hz
|
| Rated operational current (Ie) at 150% overload |
302 A
|
| Rated operational power at 380/400 V, 50 Hz, 3-phase |
160 kW
|
| Rated operational voltage |
400 V AC, 3-phase
480 V AC, 3-phase |
| Resolution |
0.1 Hz (Frequency resolution, setpoint value)
|
| Short-circuit protection rating |
400 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
|
| Starting current - max |
200 %, IH, max. starting current (High Overload), for 4 seconds every 40 seconds, Power section
|
| Supply frequency |
50/60 Hz
|
| Switching frequency |
4 kHz, 4 - 8 kHz adjustable (audible), fPWM, Power section, Main circuit
|
| System configuration type |
AC supply systems with earthed center point
|
| Voltage rating - max |
480 VAC
|
| Assigned motor current IM at 400 V, 50 Hz, 150% overload |
279 A
|
| Assigned motor current IM at 440 - 480 V, 60 Hz, 150% overload |
302 A
|
| Assigned motor power at 460/480 V, 60 Hz, 3-phase |
250 HP
|
| Apparent power at 400 V |
209.23 kVA
|
| Apparent power at 480 V |
251.08 kVA
|
| Braking resistance |
6 Ω
|
| Braking torque |
Max. 30 % MN, Standard - Main circuit
Max. 100 % of rated operational current Ie with external braking resistor - Main circuit Max. 100 % of rated operational current Ie, variable, DC - Main circuit |
| Switch-on threshold for the braking transistor |
780 VDC
|
| Number of inputs (analog) |
2
|
| Number of inputs (digital) |
5
|
| Number of outputs (analog) |
2
|
| Number of outputs (digital) |
2
|
| Number of relay outputs |
2 (parameterizable, 1 N/O and 1 changeover contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
|
| Rated control voltage (Uc) |
24 V DC (external, max. 100 mA)
|
| Equipment heat dissipation, current-dependent Pvid |
3040 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Rated operational current for specified heat dissipation (In) |
302 A
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Send email
Product specifications
