Select your location

CEAG ExLin Non-metallic Hazardous Area Linear LED Light Fixtures
Serial Number Verified :
The product is verified as being authentic; however, this does not guarantee the condition or fit for purpose of the product.

CEAG ExLin Non-metallic Hazardous Area Linear LED Light Fixtures

Approved for use in Zone 1 and 2 hazardous areas, the Crouse-Hinds series ExLin provides longer life, improved efficiency and superior performance with a competitive payback versus fluorescent fixtures.  The ExLin is a linear LED designed for safety, reliability and efficiency.  

ExLin LED fixtures combine state-of-the-art LED technology with optimised thermal management, time-tested drivers, and field-proven GRP enclosures to ensure long service life in extreme environments. 

Three lumen output ranges replace 2x18W (2750 lumen), 2x36W (5300 lumen) and 2x58W (8120 lumen) fluorescent fixtures, and custom optics optimize light distribution.

ExLin LED Hazardous Area Linear Fixture
120 lumens per watt
Installation friendly
Low profile and lightweight
100,000 hours at 25°C

Certifications and compliances

IEC standards

  • EC-Type Examination Certificate: BVS 18 ATEX E 037 X
  • IECEx Certificate of Conformity: IECEx BVS 18.0028X
  • Marking accd. to 2014/34/EU: Ex II 2 G Ex eb ib op is q IIC T4 Gb  
  • Marking accd. to IECEx: Ex eb ib op is q IIC T4 Gb
  • Degree of protection accd. to EN 60529: IP66/IP67
  • Permissible ambient temperature: -40 °C up to +55 °C with glass cover
  • IK-class according to IEC/EN 62262: IK10

Design features

  • Three lumen output ranges replace 2x18W, 2x36W and 2x58W fluorescent fixtures
  • Rated life of 100,000 hours at 25ºC provides years of low maintenance operation 
  • 120 lm/W provides up to 40% energy efficiency compared to traditional fluorescent fixtures
  • Operating temperature from -40ºC to +55ºC
  • Optimized light distribution with optics and lens options – standard, narrow and wide beam optics optimize light distribution, providing light where the customer needs it with the potential to reduce the number of fixtures required
  • Clear or diffused (frosted) lens available in glass provides application flexibility
  • Low profile and lightweight design with drop-in mounting compatibility to eLLK fluorescent fixtures
  • GRP enclosure material is time tested and field proven for durability in harsh and hazardous applications globally
  • Optimized thermal management ensures long service life in extreme environments

Standard materials

  • Fixture enclosure – glassfiber-reinforced polyester
  • Fixture lens – toughened glass or polycarbonate, clear or opaque


How to buy from Eaton
Locate a channel partner

Find an authorized distributor or sales rep near you

Questions before you buy

Email us using the link above, or call our Customer Support team at 1-866-764-5454