Eaton Moeller® series PKE32 System-protective circuit-breaker, Complete device with standard knob, 15 - 36 A, 36 A, With overload release, Screw terminals
| Product Name |
Eaton Moeller® series PKE System-protective circuit-breaker
|
| Catalog Number |
168972
|
| EAN |
4015081654635
|
| Product Length/Depth |
101 mm
|
| Product Height |
102.5 mm
|
| Product Width |
45 mm
|
| Product Weight |
0.436 kg
|
| Certifications |
VDE 0660
IEC/EN 60947 |
| Catalog Notes |
|
| Model Code |
PKE32/XTUCP-36
|
| Actuator type |
Turn button
|
| Features |
Complete device with protection unit
|
| Fitted with: |
Standard knob
|
| Functions |
Line and cable protection
System protection Overload release |
| Number of poles |
Three-pole
|
| Current flow times - min |
1000 (Class 20) AC-4 cycle operation, Main conducting paths
900 (Class 15) AC-4 cycle operation, Main conducting paths Note: Going below the minimum current flow time can cause overheating of the load (motor). 500 (Class 5) AC-4 cycle operation, Main conducting paths 700 (Class 10) AC-4 cycle operation, Main conducting paths For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods. |
| Cut-out periods - min |
≤ 500 ms, main conducting paths, AC-4 cycle operation
|
| Degree of protection |
IP20
Terminals: IP00 |
| Lifespan, electrical |
50,000 operations (at 400V, AC-3)
|
| Lifespan, mechanical |
50,000 Operations (Main conducting paths)
|
| Mounting Method |
DIN rail (top hat rail) mounting optional
|
| Operating frequency |
60 Operations/h
|
| Overload release current setting - min |
15 A
|
| Overload release current setting - max |
36 A
|
| Overvoltage category |
III
|
| Pollution degree |
3
|
| Product category |
Circuit-breaker PKE
|
| Protection |
Finger and back-of-hand proof, Protection against direct contact when actuated from front (EN 50274)
|
| Rated impulse withstand voltage (Uimp) |
6000 V AC
|
| Suitable for |
DIN rail (top hat rail) mounting
|
| Temperature compensation |
-25 - 55 °C, Operating range
-5 - 40 °C to IEC/EN 60947, VDE 0660 |
| Shock resistance |
25 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
55 °C
|
| Ambient operating temperature (enclosed) - min |
-25 °C
|
| Ambient operating temperature (enclosed) - max |
40 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Ambient storage temperature - max |
80 °C
|
| Climatic proofing |
Damp heat, cyclic, to IEC 60068-2-30
Damp heat, constant, to IEC 60068-2-78 |
| Terminal capacity (flexible with ferrule) |
2 x (1 - 6) mm², ferrule to DIN 46228
1 x (1 - 6) mm², ferrule to DIN 46228 |
| Terminal capacity (solid) |
2 x (1 - 6) mm²
1 x (1 - 6) mm² |
| Stripping length (main cable) |
10 mm
|
| Tightening torque |
1.7 Nm, Screw terminals, Main cable
1 Nm, Screw terminals, Control circuit cables |
| Rated frequency - min |
50 Hz
|
| Rated frequency - max |
60 Hz
|
| Rated operational current (Ie) |
36 A
|
| Rated operational voltage (Ue) - min |
690 V
|
| Rated operational voltage (Ue) - max |
690 V
|
| Rated uninterrupted current (Iu) |
36 A
|
| Short-circuit release |
Trip block adjustable 5 - 8 x Ir
Delayed approx. 60 ms, Trip blocks ± 20% tolerance, Trip blocks Basic device fixed 15.5 x Iu, Trip Blocks |
| Connection |
Screw terminals
|
| Number of auxiliary contacts (change-over contacts) |
0
|
| Number of auxiliary contacts (normally closed contacts) |
0
|
| Number of auxiliary contacts (normally open contacts) |
0
|
| Equipment heat dissipation, current-dependent Pvid |
11.4 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
3.8 W
|
| Rated operational current for specified heat dissipation (In) |
32 A
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
E-mail verzenden
Productspecificaties
