Eaton Z-SCH Installation contactor, 230VAC/50Hz, 2 N/C, 25A
| Product Name |
Eaton Z-SCH contactor
|
| Catalog Number |
193887
|
| EAN |
9010238040304
|
| Product Length/Depth |
85 mm
|
| Product Height |
65 mm
|
| Product Width |
17.7 mm
|
| Product Weight |
0.14 kg
|
| Compliances |
RoHS conform
|
| Model Code |
Z-SCH230/1/25-02
|
| Amperage Rating |
25 A
|
| Features |
Additional equipment possible
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| Degree of protection |
IP20
|
| Equipment heat dissipation, current-dependent |
4.2 W
|
| Heat dissipation per pole, current-dependent |
3 W
|
| Incandescent lamp load - max |
3000 W
|
| Load fluorescent lamp - max |
1160 VA
|
| Load fluorescent lamp (duo circuit) - max |
2552 VA
|
| Load fluorescent lamp (parallel compensated) - max |
1044 VA
|
| Number of contacts (normally closed contacts) |
2
|
| Number of contacts (normally open contacts) |
0
|
| Number of modular spacings |
1
|
| Rated operating voltage (Ue) - max |
440 V
|
| Rated operating voltage (Ue) - min |
440 V
|
| Rated operational current for specified heat dissipation (In) |
25 A
|
| Utility category |
1
|
| Voltage rating (excitation) - max |
253 V
|
| Voltage rating (excitation) - min |
195.5 V
|
| Built-in depth |
60 mm
|
| Voltage type |
AC
|
| Utilization category (according to EN IEC 60947-4-1) |
AC-1
|
E-mail verzenden
Productspecificaties
