Eaton Moeller® series CI-K Insulated enclosure, for PKZ0, +rotary handle, red/yellow CI-K2-PKZ0-GRV
| Product Name |
Eaton Moeller® series CI-K Accessory Insulated enclosure
|
| Catalog Number |
219656
|
| EAN |
4015082196561
|
| Product Length/Depth |
132 mm
|
| Product Height |
180 mm
|
| Product Width |
100 mm
|
| Product Weight |
0.415 kg
|
| Compliances |
CE
|
| Catalog Notes |
Additional cable insertion membrane as cable entry gland: 2 x in the rear wall and 1 x at the bottom.
|
| Model Code |
CI-K2-PKZ0-GRV
|
| Enclosure material |
Plastic
|
| Fitted with: |
N and PE terminal
Red-yellow rotary knob, for use as EMERGENCY STOP switch (according to EN 60204) |
| Knockouts |
2 x M25 (cable entry knockout at the top)
2 x M25 (cable entry knockout at the bottom) |
| Degree of protection |
IP65
NEMA Other |
| Model |
Surface mounting
|
| Product category |
Accessories
|
| Suitable for |
Emergency stop
|
| Used with |
+L (2 units), +NHI or AGM, +U or A, PKZM0-… and VHI
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
70 °C
|
| Equipment heat dissipation, current-dependent Pvid |
0 W
|
| Heat dissipation capacity Pdiss |
12.5 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Rated operational current for specified heat dissipation (In) |
0 A
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Please enquire
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
E-mail verzenden
Productspecificaties
