Eaton Moeller® series MSC-DE DOL starter, Ir= 3 - 12 A, 24 V DC, DC Voltage
| Product Name |
Eaton Moeller® series MSC-DE DOL starter
|
| Catalog Number |
167820
|
| EAN |
4015081643974
|
| Product Length/Depth |
145 mm
|
| Product Height |
272 mm
|
| Product Width |
45 mm
|
| Product Weight |
1.274 kg
|
| Certifications |
CE
CSA-C22.2 No. 14-10 CSA Class No.: 3211-08 VDE 0660 CSA IEC/EN 60947-4-1 UL CSA File No.: 012528 UL Category Control No.: NKJH UL File No.: E123500 UL60947-4-1A |
| Model Code |
MSC-DE-12-M17-SP(24VDC)
|
| Fitted with: |
Short-circuit release
|
| Connection to SmartWire-DT |
No
|
| Current flow times - min |
Note: Going below the minimum current flow time can cause overheating of the load (motor).
For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods. 900 (Class 15) AC-4 cycle operation, Main conducting paths 1000 (Class 20) AC-4 cycle operation, Main conducting paths 500 (Class 5) AC-4 cycle operation, Main conducting paths 700 (Class 10) AC-4 cycle operation, Main conducting paths |
| Cut-out periods - min |
≤ 500 ms, main conducting paths, AC-4 cycle operation
|
| Degree of protection |
IP20
NEMA Other |
| Model |
UL Type E starter
|
| Mounting method |
DIN rail
|
| Number of auxiliary contacts (normally closed contacts) |
0
|
| Number of auxiliary contacts (normally open contacts) |
1
|
| Overload release current setting - min |
3 A
|
| Overload release current setting - max |
12 A
|
| Overvoltage category |
III
|
| Pollution degree |
3
|
| Rated impulse withstand voltage (Uimp) |
6000 V AC
|
| Type |
Starter with electronic trip unit
|
| Voltage type |
DC
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
55 °C
|
| Rated operational current (Ie) |
16.7 A
|
| Rated operational current (Ie) at AC-3, 380 V, 400 V, 415 V |
12 A
|
| Rated operational power at AC-3, 220/230 V, 50 Hz |
3 kW
|
| Rated operational power at AC-3, 380/400 V, 50 Hz |
7.5 kW
|
| Rated operational voltage |
208 - 600 V AC
|
| Switching capacity (auxiliary contacts, general use) |
15 A, 600 V AC, (UL/CSA)
1 A, 250 V DC, (UL/CSA) |
| Switching capacity (auxiliary contacts, pilot duty) |
P300, DC operated (UL/CSA)
A600, AC operated (UL/CSA) |
| Rated conditional short-circuit current (Iq), type 2, 380 V, 400 V, 415 V |
0 A
|
| Short-circuit current rating (basic rating) |
10 kA, SCCR (UL/CSA)
150 A, max. CB, SCCR (UL/CSA) 200 A, max. Fuse, SCCR (UL/CSA) |
| Short-circuit current rating (high fault at 480 V) |
65 kA, CB, SCCR (UL/CSA)
100 kA, Fuse, SCCR (UL/CSA) 100 A, Class J, max. Fuse, SCCR (UL/CSA) 75 A, max. CB, SCCR (UL/CSA) |
| Short-circuit current rating (high fault at 600 V) |
100 kA, Fuse, SCCR (UL/CSA)
110 A, Class J/CC, max. Fuse, SCCR (UL/CSA) |
| Short-circuit current rating (type E) |
18 kA, 240 V, SCCR (UL/CSA)
18 kA, 480 Y/277 V, SCCR (UL/CSA) |
| Short-circuit release (Irm) - max |
186 A
|
| Power consumption (sealing) at DC |
0.86 W
|
| Rated control supply voltage (Us) at AC, 50 Hz - min |
0 V
|
| Rated control supply voltage (Us) at AC, 50 Hz - max |
0 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - min |
0 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - max |
0 V
|
| Rated control supply voltage (Us) at DC - min |
24 V
|
| Rated control supply voltage (Us) at DC - max |
24 V
|
| Assigned motor power at 200/208 V, 60 Hz, 3-phase |
3 HP
|
| Assigned motor power at 230/240 V, 60 Hz, 3-phase |
3 HP
|
| Assigned motor power at 460/480 V, 60 Hz, 3-phase |
7.5 HP
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
1.4 W
|
| Rated operational current for specified heat dissipation (In) |
12 A
|
| Static heat dissipation, non-current-dependent Pvs |
0.86 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Send e-mail
Produktspecifikationer
