Eaton Modular PLC XC204, Micro PLC, programmable CODESYS 3, USB, 2xEthernet, RS485, 2DIO, XN300 IO expandable
| Product Name |
Eaton XC200 modular PLC
|
| Catalog Number |
199977
|
| Model Code |
XC-204-C20-002
|
| EAN |
4015081997640
|
| Product Length/Depth |
104.2 mm
|
| Product Height |
29.3 mm
|
| Product Width |
80.3 mm
|
| Product Weight |
0.11 kg
|
| Certifications |
UL listed
EN 61131 EAC UL File No.: E205091 CE cULus Listed |
| Features |
Short-circuit protection (power supply)
|
| Fitted with: |
XSOFT-CODESYS 3
|
| Functions |
Additional program memory possible
Redundancy |
| Connection type |
Push-in spring-cage terminal, Connection design in TOP direction
|
| Degree of protection |
IP20
|
| Model |
Modular
|
| Mounting method |
Rail mounting possible
|
| Overvoltage category |
II
|
| Pollution degree |
2
|
| Potential isolation |
Between Digital inputs: no
Between Digital outputs: no |
| Voltage type |
DC
|
| Mounting position |
Vertical (on horizontal top-hat rail)
|
| Shock resistance |
15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 9 Impacts
|
| Vibration resistance |
5 - 8.4 / 8.4 -150 Hz, 3,5 mm / 1 g
|
| Air pressure |
795 - 1080 hPa (operation)
|
| Ambient operating temperature - min |
-20 °C
|
| Ambient operating temperature - max |
60 °C
|
| Ambient storage temperature - min |
-25 °C
|
| Ambient storage temperature - max |
70 °C
|
| Relative humidity |
< 95 % (non-condensing)
|
| Emitted interference |
40 dB (at 30 - 230 MHz, Class A, radiated, high frequency)
47 dB (at 230 - 1000 MHz, Class A, radiated, high frequency) |
| Terminal capacity |
0.25 - 0.75 mm², with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
|
| Terminal capacity (AWG) |
24 - 16
|
| Terminal capacity (flexible with ferrule) |
0.25 - 1.5 mm², with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.25 - 1.5 mm², with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
| Terminal capacity (flexible) |
0.2 - 1.5 mm², H 07V-K
|
| Terminal capacity (solid) |
0.2 - 1.5 mm², H07V-U
|
| Input voltage |
0 - 5 V (Digital inputs, low level)
24 V DC (Digital inputs) 15 - 30 V (Digital inputs, high level) |
| Output current |
0.5 A
|
| Supply voltage at AC, 50 Hz - min |
0 VAC
|
| Supply voltage at AC, 50 Hz - max |
0 VAC
|
| Supply voltage at DC - min |
19.2 VDC
|
| Voltage dips |
20 ms
10 ms |
| Supply voltage at DC - max |
30 VDC
|
| Interfaces |
2 x ETH
RS485 DIO XN300 |
| Protocol |
EtherNet/IP
MODBUS Other bus systems TCP/IP |
| Delay time |
200 µs, Digital outputs, Delay on signal change and resistive load, from High to Low signal
200 µs, Digital outputs, Delay on signal change and resistive load, from Low to High signal |
| Input current |
≤ 1.1 mA (Digital inputs, low level)
≥ 2.0 mA (Digital inputs, high level) |
| Number of channels |
2
|
| Number of inputs (analog) |
0
|
| Number of inputs (digital) |
2
|
| Number of outputs (analog) |
0
|
| Number of outputs (digital) |
2
|
| Number of relay outputs |
0
|
| Rated operational current (Ie) |
2.4 A (supply input)
|
| Utilization factor |
100 % (Ʃ IAmax = 2A)
|
| Explosion safety category for gas |
None
|
| Explosion safety category for dust |
None
|
| Memory capacity |
512,000 kByte
|
| Static heat dissipation, non-current-dependent Pvs |
6.3 W
|
| Heat dissipation details |
The max. heat dissipation is specified as the maximum power produced inside the device's housing.
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Meets the product standard's requirements.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Envoyer un e-mail
Spécifications du produit
