Download

Wordt uit productie genomen

140053
Model Code: XN-2DO-24VDC-0.5A-P

Eaton XN Digital output module XI/ON, 24 V DC, 2DO, 0.5A, pulse-switching

Productspecificaties

Neem contact op met Sales

Download I/O assistant

Specificaties Documentatie

General specifications

Product Name	Eaton XN Output module
Catalog Number	140053
EAN	7640130120211
Product Length/Depth	55.4 mm
Product Height	74.1 mm
Product Width	12.6 mm
Product Weight	0.029 kg
Certifications	CE UL Recognized cULus IEC/EN 61000-6-4 UL 508 CSA-C22.2 No. 142 IEC/EN 61000-6-2 CSA Class No.: 2252-01, 2252-81 Certified by UL for use in Canada IEC/EN 6113-2 IEC/EN 61131-2 UL File No.: E205091 UL Category Control No.: NRAQ, NRAQ7 UL report applies to both US and Canada
Model Code	XN-2DO-24VDC-0.5A-P

Functies & kenmerken

Electric connection type	Screw-/spring clamp connection
Features	Fieldbus connection over separate bus coupler possible
Fitted with:	Connectable sensors for inductive loads Connectable sensors for lamp loads Connectable sensors for resistive loads
Functions	Diagnosis function Positive switching Short-circuit protection, outputs available

Algemeen

Current consumption	32 mA, from module bus, Analog input modules 20 mA, from supply terminal
Degree of protection	IP20
Mounting method	Rail mounting possible
Number of channels	2
Operating frequency	< 2 at inductive load
Product category	XN Slice module
Suitable for	Base modules with C-connection: 4-wire Base modules with C-connection: 2-wire/3-wire
Switching frequency	2 Hz 5000 Hz, with resistive load RLO < 1 kΩ, Digital outputs 10 Hz, with lamp load, Digital outputs
Type	XI/ON I/O module
Used with	XN-S3S-SBC XN-S4S-SBCS XN-S3T-SBC XN-S4T-SBCS
Voltage type	DC

Omgevingsomstandigheden, mechanisch

Ambient operating temperature - min	0 °C
Ambient operating temperature - max	55 °C
Ambient storage temperature - min	-25 °C
Ambient storage temperature - max	85 °C
Environmental conditions	Harmful gasses - SO2: 10 ppm (relative humidity < 75%, no condensation) Harmful gasses - H2S: 1 ppm (relative humidity < 75%, no condensation)
Relative humidity	5 - 95 % (indoor, Level RH-2, non-condensing for storage at 45°C)

Klimatologische milieuomstandigheden

Air discharge	According to EN 61100-4-2
Burst impulse	According to IEC/EN 61000-4-4
Contact discharge	According to EN 61100-4-2
Electromagnetic fields	According to IEC EN 61100-4-2
Emitted interference	30 - 230 MHz (radiated, high frequency, according to EN 55016-2-3) 230 - 1000 MHz (radiated, high frequency, according to EN 55016-2-3)
Radiated RFI	IEC/EN 61100-4-6
Surge rating	According to IEC/EN 61000-4-5 Level 4
Voltage dips	According to EN 61131-2 (Voltage fluctuations/voltage dips)

Elektromagnetische compatibiliteit

Radiated RFI	IEC/EN 61100-4-6
Surge rating	According to IEC/EN 61000-4-5 Level 4
Voltage dips	According to EN 61131-2 (Voltage fluctuations/voltage dips)

Klembereik

Power loss	1 W
Rated operational voltage	24 V DC (supply terminal)
Short-circuit protection	Protected, Short-circuit rating, Digital outputs
Short-circuit release	Automatic, Ii, Reset after short-circuit rectified, Digital outputs
Supply voltage at AC, 50 Hz - min	0 VAC
Supply voltage at AC, 50 Hz - max	0 VAC
Supply voltage at DC - min	18 VDC
Supply voltage at DC - max	30 VDC

Elektrische waarde

Interfaces	Terminating resistor: > 48 Ω
Number of bytes	2 diagnostic bytes
Protocol	Other bus systems
Short-circuit release	Automatic, Ii, Reset after short-circuit rectified, Digital outputs
Supply voltage at AC, 50 Hz - min	0 VAC
Supply voltage at AC, 50 Hz - max	0 VAC
Supply voltage at DC - min	18 VDC
Supply voltage at DC - max	30 VDC

Communicatie

Delay time	100 µs, Digital outputs, Delay on signal change and resistive load, from High to Low signal 100 µs, Digital outputs, Delay on signal change and resistive load, from Low to High signal
Input current at signal 1	0 mA
Input voltage	Min. L+ 1 V (Digital inputs, high level)
Lamp load	≤ 3 W (at RLL)
Load resistance	1.2 h (inductive load) ≥ 48 Ω
Number of inputs (digital)	0
Number of outputs (digital)	2
Output	2 Digital Outputs (24 V DC, 0.5 A)
Output current	< 0.6 A (high level, permissible range) 1 A, Module total current, Digital outputs 0.5 A
Output voltage	23 V DC (Digital outputs)
Utilization factor	100 %

Ingang / uitgang

Explosion safety category for dust	None
Explosion safety category for gas	None
Potential isolation	Through optocoupler: yes
Delay time	100 µs, Digital outputs, Delay on signal change and resistive load, from High to Low signal 100 µs, Digital outputs, Delay on signal change and resistive load, from Low to High signal
Input current at signal 1	0 mA
Input voltage	Min. L+ 1 V (Digital inputs, high level)
Lamp load	≤ 3 W (at RLL)
Load resistance	1.2 h (inductive load) ≥ 48 Ω
Number of inputs (digital)	0
Number of outputs (digital)	2
Output	2 Digital Outputs (24 V DC, 0.5 A)
Output current	< 0.6 A (high level, permissible range) 1 A, Module total current, Digital outputs 0.5 A
Output voltage	23 V DC (Digital outputs)
Utilization factor	100 %

Veiligheid

Equipment heat dissipation, current-dependent Pvid	0 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Rated operational current for specified heat dissipation (In)	0 A
Static heat dissipation, non-current-dependent Pvs	1 W
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Meets the product standard's requirements.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Ontwerpverificatie

Equipment heat dissipation, current-dependent Pvid	0 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Rated operational current for specified heat dissipation (In)	0 A
Static heat dissipation, non-current-dependent Pvs	1 W
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Meets the product standard's requirements.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

eCAD model

DA-CE-ETN.XN-2DO-24VDC-0.5A-P

mCAD model

Opmerking: Als er bestanden ontbreken in de .zip-download, wordt het bestandstype niet ondersteund voor bulkdownload.

Ontworpen om samen te werken

Ontdek andere Eaton producten en accessoires die zijn ontwikkeld om dit product te verbeteren.

140090

140090

Eaton XN Base module washer XI/ON, screw, 3 connection levels, con. to C rail
140079

140079

Eaton XN Base module washer XI/ON, tension spring, 3 connection levels, con. to C rail
140091

140091

Eaton XN Base module washer XI/ON, screw, 4 connection levels, con. to C rail XN-S4S-SBCS
140080

140080

Eaton XN Base module washer XI/ON, tension spring, 4 connection levels, con. to C rail XN-S4T-SBCS

140090

140090

Eaton XN Base module washer XI/ON, screw, 3 connection levels, con. to C rail
140079

140079

Eaton XN Base module washer XI/ON, tension spring, 3 connection levels, con. to C rail
140091

140091

Eaton XN Base module washer XI/ON, screw, 4 connection levels, con. to C rail XN-S4S-SBCS
140080

140080

Eaton XN Base module washer XI/ON, tension spring, 4 connection levels, con. to C rail XN-S4T-SBCS

Meer tonen Minder tonen

Voer uw plaats of postcode of BuyNow.GeolocationIconAlt

Mijn locatie

Toon locaties met aanbod:

Product ophalen

Online bestellen en product verzenden

Groothandel partner	Beschikbare hoeveelheid	Type locatie	BuyNow.TableColLabelLink

Eaton is een intelligent powermanagementbedrijf dat is toegewijd aan het verbeteren van de levenskwaliteit en het beschermen van het milieu voor mensen overal. We worden geleid door onze verbintenis om op de juiste manier zaken te doen, duurzaam te werk te gaan en om onze klanten te helpen bij hun energiemanagement, zowel vandaag als morgen. Door in te spelen op de globale trends van elektrificatie en digitalisering, versnellen wij de transitie naar duurzame energie dankzij onze oplossingen voor 's werelds meest dringende uitdagingen op het gebied van energiemanagement en door het beste te doen voor onze stakeholders en de hele maatschappij.

140053 Model Code: XN-2DO-24VDC-0.5A-P