Eaton Crouse-Hinds series MTL SD surge protector, 11 Vac, 16 Vdc, 5kA surge current, 250mA, T-section DIN rail, <25V voltage protection level, Fuse disconnect, 12 AWG
| Product Name |
Eaton Crouse-Hinds series MTL SD surge protector
|
| Product Name |
Eaton Crouse-Hinds series MTL SD surge protector
|
| Catalog Number |
SD16
|
| Product Length/Depth |
99 mm
|
| Product Height |
101.3 mm
|
| Product Width |
7 mm
|
| Product Weight |
70 g
|
| Area classification |
Hazardous/Classified Locations
|
| Standards type |
NEC/CEC
IEC IECEx/ATEX |
| IECEx/ATEX hazardous rating |
Zone 2
|
| Ingress protection (IP) ratings |
IP54
|
| Mounting Method |
T-section DIN rail
|
| Frequency |
25 kHz
|
| Response Time |
<1ns
|
| Fuse Disconnect |
Yes
|
| Category Tested Acc. IEC 61643-21 |
A2, B2, C1, C2, C3, D1
|
| Conductor Cross-section AWG |
12 AWG
|
| Minimum Ambient Operating Temperature |
-40 °C
|
| Maximum Ambient Operating Temperature |
80 °C
|
| Minimum Ambient Storage Temperature |
-40 °C
|
| Maximum Ambient Storage Temperature |
80 °C
|
| Humidity |
5-95% RH (non-condensing)
|
| Modes of Protection |
For protecting electronic equipment and systems against surges on signal and I/O cabling
|
| Nominal Voltage AC |
11V
|
| Nominal Voltage DC |
16V
|
| Nominal Discharge Surge Current (8/20) |
5 kA
|
| Lightning Impulse Current (10/350 µs) |
2.8 kA
|
| Nominal Load Current |
250mA
|
| Voltage Protection Level at In |
40V
|
| Voltage Protection Level at 1kV/µS |
<25V
|
| Series Resistance (Ω/Line) |
4.2Ω
|
| Max. Leakage Current |
5µA
|
| Max. Continuous Voltage AC |
17V
|
Enviar e-mail
MyEatonFAQs
Especificações do produto
