Eaton xEffect xVtl Enclosures Switch- & Controlgear Enclosure. Distribution cabinet, HxWxD=2000x1000x300mm, IP55, 0/3/20
| Product Name |
Eaton xEffect xVtl empty enclosure
|
| Catalog Number |
114595
|
| Product Length/Depth |
1000 mm
|
| Product Height |
2000 mm
|
| Product Width |
308.5 mm
|
| Product Weight |
127 kg
|
| Compliances |
RoHS conform
|
| Certifications |
IEC/EN 60439-3
IEC/EN 62208 IEC/EN 60439-1 |
| EAN |
4015081139958
|
| Model Code |
XVTL-MP/BX/IC-10/3/20
|
| Type |
Control centres XVTL
|
| Color |
Gray
|
| Voltage rating |
415 V
|
| Rated insulation voltage (Ui) |
690 V
|
| Rated impulse withstand voltage (Uimp) |
6 kV
|
| Rated peak withstand current |
143 kA
|
| Rated operation current (Ie) |
2500 A
|
| Rated short-time withstand current (Icw) |
65 kA
|
| Frequency rating |
50 Hz
|
| Frequency rating of contacts |
50 Hz (AC)
|
| Overvoltage category |
IV
|
| Pollution degree |
3
|
| Unit type |
Complete housing
|
| Surface treatment |
Painting, phosphated and polyester powder coating
|
| Mounting method |
Wall fastening
|
| Material |
Sheet steel 2 mm
Steel |
| Material quality |
Other
|
| Number of connector holes |
0
|
| Number of covers/doors |
2
|
| Number of locks |
1
|
| Relative humidity |
50 % (at 40 °C)
|
| Permissible load of the door(s) according to IEC 62208 - max |
1000 N
|
| Permissible load of the enclosure according to IEC 62208 - max |
5000 N
|
| Permissible load of the mounting plate according to IEC 62208 - max |
4000 N
|
| Cover/door angle |
120° door opening angle (combination mounting)
120° door opening angle (single mounting) |
| Cover/door type |
Outside-supported doors with hidden hinges
Folding handle with espagnolette lock Can be removed from 90° Three-point interlock From width 1000 mm two doors Door interlock can be fitted with profile cylinder |
| Installation site |
Indoor installation
|
| Installation type |
Floor standing wall model
|
| Heat diss. ambient 35°C delta T: 20°C free stand middle encl. top (IEC 60890) |
232 W
|
| Heat diss. ambient 35°C delta T: 20°C wall mount middle encl. top (IEC 60890) |
211 W
|
| Heat diss. ambient 35°C delta T: 35°C free stand middle encl. top (IEC 60890) |
466 W
|
| Heat diss. ambient 35°C delta T: 35°C wall mount middle encl. top (IEC 60890) |
424 W
|
| Heat diss. ambient 35°C delta T:20°C free stand individ. encl. top (IEC 60890) |
249 W
|
| Heat diss. ambient 35°C delta T:20°C free stand starting encl. top (IEC 60890) |
240 W
|
| Heat diss. ambient 35°C delta T:20°C wall mount individ. encl. top (IEC 60890) |
219 W
|
| Heat diss. ambient 35°C delta T:20°C wall mount starting encl. top (IEC 60890) |
214 W
|
| Heat diss. ambient 35°C delta T:35°C free stand individ. encl. top (IEC 60890) |
499 W
|
| Heat diss. ambient 35°C delta T:35°C free stand starting encl. top (IEC 60890) |
482 W
|
| Heat diss. ambient 35°C delta T:35°C wall mount individ. encl. top (IEC 60890) |
439 W
|
| Heat diss. ambient 35°C delta T:35°C wall mount starting encl. top (IEC 60890) |
429 W
|
| Thermal dissipation (Delta T = 20 K) according to IEC/TR 60890 |
438.706 W
|
| Admissible heat dissipation (NH-SE) - max |
524 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Not applicable.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Not applicable.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Not relevant to indoor installations.
|
| 10.2.5 Lifting |
Met; assembled and secured as per the latest applicable instruction leaflet.
|
| 10.2.6 Mechanical impact |
IK10
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
IP55
|
| 10.4 Clearances and creepage distances |
Is the panel builder's responsibility.
|
| 10.5 Protection against electric shock |
< 0.1 Ω; meets the product standard's requirements.
|
| 10.6 Incorporation of switching devices and components |
Is the panel builder's responsibility.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Ui = 690 V AC
|
| 10.9.3 Impulse withstand voltage |
6 kV
|
| 10.9.4 Testing of enclosures made of insulating material |
Does not apply to metal enclosures.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility.
|
| 10.13 Mechanical function |
Meets the product standard's requirements.
|
| Features |
Connectable
EMC-version |
| Fitted with: |
Mounting plate
Screw M10: 50 x 106 A²s (base frame, main earthing) Taptite screw M6: 3.9 × 106 A²s (enclosure side plate, back plate) M6 weld stud: 50 × 106 A²s (door) |
| Functions |
Combination enclosure
|
| Protection class |
I
|
| RAL-number |
7035
|
| Special features |
|
| Suitable for |
Metrical mounting
|
E-Mail senden
Produktspezifikationen
