Eaton M22 Emergency stop/emergency switching off pushbutton, pull-release, 38 mm, 1 N/C
| Product Name |
Eaton Moeller® series M22 emergency stop/emergency switching off pushbutton
|
| Catalog Number |
110938
|
| EAN |
4015081104673
|
| Product Length/Depth |
50 mm
|
| Product Height |
80 mm
|
| Product Width |
50 mm
|
| Product Weight |
0.058 kg
|
| Certifications |
DNV
GL LR |
| Model Code |
M22-PV-K01-BVP
|
| Actuating force |
5 N
|
| Actuator color |
Red
|
| Actuator diameter |
38 mm
|
| Unlocking method |
Pull-release
|
| Number of contacts (normally closed contacts) |
1
|
| Number of contacts (normally open contacts) |
0
|
| Ambient operating temperature - max |
70 °C
|
| Ambient operating temperature - min |
-25 °C
|
| Climatic proofing |
Damp heat, cyclic, to IEC 60068-2-30
Damp heat, constant, to IEC 60068-2-78 |
| Connection to SmartWire-DT |
No
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Please enquire
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| Equipment heat dissipation, current-dependent Pvid |
0 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0.11 W
|
| Rated operational current for specified heat dissipation (In) |
6 A
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| Degree of protection |
IP66
NEMA 4X, 13 |
| Mounting method |
Built-in
|
| Mounting position |
As required
|
| Opening diameter |
22.5 mm
|
| Operating frequency |
3600 Operations/h
|
| Overvoltage category |
III
|
| Pollution degree |
3
|
| Product category |
RMQ-Titan
|
| Rated conditional short-circuit current (Iq) |
1 kA
|
Send e-mail
MyEatonFAQs
Produktspecifikationer
