Eaton Moeller® series MSC-DME Direct starter, 3-pole, 4 - 15 kW/400 V/AC3, 100 kA, electronic protection, DC-operated
| Product Name |
Eaton Moeller® series MSC-DME DOL starter
|
| Catalog Number |
192764
|
| EAN |
4015081935086
|
| Product Length/Depth |
149.5 mm
|
| Product Height |
206 mm
|
| Product Width |
45 mm
|
| Product Weight |
0.998 kg
|
| Certifications |
VDE 0660
IEC/EN 60947-4-1 |
| Model Code |
MSC-DME-32-M32(24VDC)
|
| Fitted with: |
Short-circuit release
|
| Connection to SmartWire-DT |
No
|
| Current flow times - min |
For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods.
900 (Class 15) AC-4 cycle operation, Main conducting paths Note: Going below the minimum current flow time can cause overheating of the load (motor). 500 (Class 5) AC-4 cycle operation, Main conducting paths 1000 (Class 20) AC-4 cycle operation, Main conducting paths 700 (Class 10) AC-4 cycle operation, Main conducting paths |
| Cut-out periods - min |
≤ 500 ms, main conducting paths, AC-4 cycle operation
|
| Degree of protection |
IP20
NEMA Other |
| Model |
IEC starter
|
| Mounting method |
DIN rail
|
| Number of auxiliary contacts (normally closed contacts) |
0
|
| Number of auxiliary contacts (normally open contacts) |
1
|
| Overload release current setting - min |
25 A
|
| Overload release current setting - max |
32 A
|
| Overvoltage category |
III
|
| Pollution degree |
3
|
| Rated impulse withstand voltage (Uimp) |
6000 V AC
|
| Suitable for |
Also motors with efficiency class IE3
|
| Type |
Starter with electronic trip unit
|
| Voltage type |
DC
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
55 °C
|
| Rated operational current (Ie) |
29.3 A
|
| Rated operational current (Ie) at AC-3, 380 V, 400 V, 415 V |
32 A
|
| Rated operational current (Ie) at AC-3, 500 V |
28.9 A
|
| Rated operational current (Ie) at AC-3, 690 V |
17 A
|
| Rated operational power at AC-3, 220/230 V, 50 Hz |
7.5 kW
|
| Rated operational power at AC-3, 380/400 V, 50 Hz |
15 kW
|
| Rated operational power at AC-3, 500 V, 50 Hz |
18.5 kW
|
| Rated operational power at AC-3, 690 V, 50 Hz |
15 kW
|
| Rated operational voltage |
230 - 690 V AC
|
| Rated conditional short-circuit current (Iq), type 2, 380 V, 400 V, 415 V |
100000 A
|
| Short-circuit release (Irm) - max |
496 A
|
| Rated control supply voltage (Us) at AC, 50 Hz - min |
0 V
|
| Rated control supply voltage (Us) at AC, 50 Hz - max |
0 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - min |
0 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - max |
0 V
|
| Rated control supply voltage (Us) at DC - min |
24 V
|
| Rated control supply voltage (Us) at DC - max |
24 V
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Send e-mail
Produktspecifikationer
