Eaton Moeller® series DILMT Power contactor, 3 pole, 380 V 400 V: 18.5 kW, 24 V 50/60 Hz, AC operation, Screw terminals
| Product Name |
Eaton Moeller® series DILMT Contactor
|
| Catalog Number |
197619
|
| EAN |
4015081944989
|
| Product Length/Depth |
108.1 mm
|
| Product Height |
103.6 mm
|
| Product Width |
55 mm
|
| Product Weight |
0.776 kg
|
| Certifications |
GB14048
IEC/EN 60947 EN 60335-1 |
| Catalog Notes |
Not suitable for motors with efficiency class IE3.
|
| Model Code |
DILMT40(24V50/60HZ)
|
| Ambient operating temperature - max |
55 °C
|
| Ambient storage temperature - max |
80 °C
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Climatic proofing |
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30 |
| Number of auxiliary contacts (normally closed contacts) |
0
|
| Number of auxiliary contacts (normally open contacts) |
0
|
| Rated breaking capacity at 380/400 V |
320 A
|
| Rated insulation voltage (Ui) |
690 V
|
| Rated operational current (Ie) at AC-1, 380 V, 400 V, 415 V |
60 A
|
| Rated operational current (Ie) at AC-3, 220 V, 230 V, 240 V |
40 A
|
| Rated operational current (Ie) at AC-3, 380 V, 400 V, 415 V |
40 A
|
| Rated operational power at AC-3, 380/400 V, 50 Hz |
18.5 kW
|
| Rated operational power at AC-3, 690 V, 50 Hz |
22 kW
|
| Rated operational voltage (Ue) at AC - max |
690 V
|
| Number of poles |
Three-pole
|
| Application |
Contactors for Motors
|
| Connection |
Screw terminals
|
| Connection to SmartWire-DT |
No
|
| Degree of protection |
IP20
|
| Frame size |
FS3
|
| Lifespan, electrical |
900,000 Operations (at 400V, AC-3)
|
| Lifespan, mechanical |
5,000,000 Operations (AC operated)
|
| Operating frequency |
3600 mechanical Operations/h (AC operated)
|
| Overvoltage category |
III
|
| Pollution degree |
3
|
| Product category |
Contactors
|
| Rated impulse withstand voltage (Uimp) |
6000 V AC
|
| Used with |
DILMT95-XHI11-SR and DILT-XHI01(10)
|
| Utilization category |
AC-1: Non-inductive or slightly inductive loads, resistance furnaces
AC-4: Normal AC induction motors: starting, plugging, reversing, inching AC-3: Normal AC induction motors: starting, switch off during running |
| Voltage type |
AC
|
| Pick-up voltage |
0.85 - 1.1 V AC x Uc
|
| Power consumption, pick-up, 50 Hz |
0 VA, Dual-frequency coil in a cold state and 1.0 x Us
220 VA, Dual-frequency coil in a cold state and 1.0 x Us |
| Power consumption, pick-up, 60 Hz |
0 VA, Dual-frequency coil in a cold state and 1.0 x Us
220 VA, Dual-frequency coil in a cold state and 1.0 x Us |
| Power consumption, sealing, 50 Hz |
5 W, Dual-frequency coil in a cold state and 1.0 x Us
0 W, Dual-frequency coil in a cold state and 1.0 x Us 6 W, Coil in a cold state and 1.0 x Us |
| Power consumption, sealing, 60 Hz |
0 W, Dual-frequency coil in a cold state and 1.0 x Us
5 W, Dual-frequency coil in a cold state and 1.0 x Us 20 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 60 Hz 0 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 60 Hz |
| Rated control supply voltage (Us) at AC, 50 Hz - max |
24 V
|
| Rated control supply voltage (Us) at AC, 50 Hz - min |
24 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - max |
24 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - min |
24 V
|
| Screw size |
M3.5, Terminal screw
M6, Terminal screw |
| Screwdriver size |
2, Terminal screw, Pozidriv screwdriver
2, Terminal screw, Control circuit cables, Pozidriv screwdriver |
| Stripping length (control circuit cable) |
14 mm
|
| Stripping length (main cable) |
14 mm
|
| Terminal capacity (solid) |
1 x (2.5 - 25) mm², Main cables
2 x (2.5 - 16) mm², Main cables 2 x (0.75 - 2.5) mm² 1 x (0.75 - 2.5) mm² |
| Terminal capacity (stranded) |
1 x (2.5 - 25) mm²
2 x (2.5 - 16) mm² |
| Tightening torque |
1.2 Nm, Screw terminals
2.5 Nm |
Send e-mail
MyEatonFAQs
Produktspecifikationer
