Eaton DA1 Variable frequency drive, 240 V AC, 3-phase, 20.9 A, IP66, NEMA 4X, FS3, Radio interference, Brake chopper, Local controls
| Product Name |
Eaton DA1 Variable frequency drive
|
| Catalog Number |
EP-400028
|
| EAN |
4015082950101
|
| Product Length/Depth |
225.5 mm
|
| Product Height |
310 mm
|
| Product Width |
210.5 mm
|
| Product Weight |
6.6 kg
|
| Certifications |
CE
Certified by UL for use in Canada CSA-C22.2 No. 14 CUL EAC IEC/EN 61800-3 IEC/EN61800-3 IEC/EN61800-5 RCM RoHS, ISO 9001 Safety: EN 61800-5-1: 2003 Specification for general requirements: IEC/EN 61800-2 UkrSEPRO UL UL 508C UL Category Control No.: NMMS, NMMS7 UL File No.: E172143 UL report applies to both US and Canada |
| Catalog Notes |
The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request.
|
| Model Code |
DA1-32018FB-B6SO
|
| Apparent power at 230 V |
7.17 kVA
|
| Apparent power at 240 V |
7.48 kVA
|
| Braking resistance |
20 Ω
|
| Braking torque |
Max. 30 % MN, Standard - Main circuit
Max. 100 % of rated operational current Ie, variable, DC - Main circuit Max. 100 % of rated operational current Ie with external braking resistor - Main circuit |
| Switch-on threshold for the braking transistor |
390 VDC
|
| Altitude |
Max. 1000 m
Above 1000 m with 1 % derating per 100 m Max. 4000 m |
| Ambient operating temperature - max |
40 °C
|
| Ambient storage temperature - max |
60 °C
|
| Ambient operating temperature - min |
-10 °C
|
| Ambient operating temperature at 150% overload - max |
40 °C
|
| Ambient operating temperature at 150% overload - min |
-10 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Climatic proofing |
< 95 average relative humidity (RH), no condensation, no corrosion
|
| Number of inputs (analog) |
2
|
| Number of inputs (digital) |
5
|
| Number of outputs (analog) |
2
|
| Number of outputs (digital) |
2
|
| Number of relay outputs |
2 (parameterizable, 1 N/O and 1 changeover contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
|
| Rated control voltage (Uc) |
24 V DC (external, max. 100 mA)
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| Equipment heat dissipation, current-dependent Pvid |
160 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| Cable length |
100 m, screened, maximum permissible, Motor feeder
150 m, unscreened, maximum permissible, Motor feeder 200 m, screened, with motor choke, maximum permissible, Motor feeder 300 m, unscreened, with motor choke, maximum permissible, Motor feeder C2 ≤ 5 m, Radio interference level, maximum motor cable length C3 ≤ 25 m, Radio interference level, maximum motor cable length |
| Communication interface |
CANopen®, built in
EtherCAT, optional Ethernet IP, optional Modbus RTU, built in Modbus-TCP, optional OP-Bus (RS485), built in PROFIBUS, optional PROFINET, optional BACnet/IP, optional |
| Connection to SmartWire-DT |
No
|
| Degree of protection |
IP66
NEMA 4X |
| Electromagnetic compatibility |
1st and 2nd environments (according to EN 61800-3)
|
| Fitted with: |
PC connection
Control unit Breaking resistance Additional PCB protection Brake chopper IGBT inverter Internal DC link OLED display Radio interference suppression filter Local controls |
| Frame size |
FS3
|
| Functions |
4-quadrant operation possible
|
| Mounting position |
Vertical
|
| Product Category |
Variable frequency drives
|
| Protection |
Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
|
| Protocol |
CAN
EtherNet/IP MODBUS Other bus systems PROFIBUS PROFINET IO TCP/IP BACnet/IP |
| Radio interference class |
C1: for conducted emissions only
Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments C2, C3: depending on the motor cable length, the connected load, and ambient conditions. |
| Safety function/level |
STO (Safe Torque Off, SIL3, PLe Cat 3)
|
| Suitable for |
Branch circuits, (UL/CSA)
|
| Efficiency |
96 % (η)
|
| Heat dissipation at current/speed |
172 W at 100% current and 0% speed
175 W at 100% current and 50% speed 178 W at 100% current and 90% speed 91 W at 50% current and 0% speed 109 W at 50% current and 50% speed 122 W at 50% current and 90% speed 86 W at 25% current and 50% speed 75 W at 25% current and 0% speed |
| Input current ILN at 150% overload |
20.9 A
|
| Leakage current at ground IPE - max |
0.93 mA
|
| Mains switch-on frequency |
Maximum of one time every 30 seconds
|
| Mains voltage - max |
264 V
|
| Mains voltage - min |
180 V
|
| Operating mode |
Optional: Vector control with feedback (CLV)
Sensorless vector control (SLV) Speed control with slip compensation U/f control |
| Output frequency - max |
500 Hz
|
| Output frequency - min |
0 Hz
|
| Output voltage (U2) |
230 V AC, 3-phase
240 V AC, 3-phase |
| Overload current IL at 150% overload |
27 A
|
| Rated control supply voltage |
10 V DC (Us, max. 10 mA)
|
| Rated frequency - max |
62 Hz
|
| Rated frequency - min |
48 Hz
|
| Rated operational power at 220/230 V, 50 Hz, 1-phase |
4 kW
|
| Rated operational voltage |
240 V AC, 3-phase
230 V AC, 3-phase |
| Resolution |
0.1 Hz (Frequency resolution, setpoint value)
|
| Short-circuit protection rating |
30 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
|
| Starting current - max |
200 %, IH, max. starting current (High Overload), for 4 seconds every 40 seconds, Power section
|
| Supply frequency |
50/60 Hz
|
| Switching frequency |
16 kHz, 4 - 24 kHz adjustable (audible), fPWM, Power section, Main circuit
|
| System configuration type |
AC supply systems with earthed center point
|
| Voltage rating - max |
240 VAC
|
| Assigned motor current IM at 220 - 240 V, 60 Hz, 150% overload |
15.2 A
|
| Assigned motor current IM at 230 V, 50 Hz, 150% overload |
14.8 A
|
| Assigned motor power at 230/240 V, 60 Hz, 1-phase |
5 HP
|
Send e-mail
MyEatonFAQs
Produktspecifikationer
