134922 Aperçu

Spécifications générales

Product Name	Eaton DS7 Soft starter
Catalog Number	134922
Model Code	DS7-340SX160N0-N
EAN	4015081317370
Product Length/Depth	178 mm
Product Height	215 mm
Product Width	108 mm
Product Weight	3.7 kg
Certifications	C-Tick CSA Class No.: 321106 CSA-C22.2 No 14-05 IEC/EN 60947-4-2 GB 14048.6 UL File No.: E251034 UkrSEPRO CSA File No.: 2511305 CSA-C22.2 No 0-M91 CE CSA CSA22.2-14 UL 508 UL

Features & Functions

Fitted with:	Internal bypass Internal bypass contacts
Functions	Suppression of closing transients Single direction Suppression of DC components for motors Min. ramp time 1 s - fast switching (semiconductor contactor) Potential isolation between power and control sections Soft start function

General information

Class	Other
Connection to SmartWire-DT	No
Degree of protection	IP20 NEMA 1
Frame size	FS4
Mains voltage - min	200 V
Mains voltage - max	480 V
Overvoltage category	II
Pollution degree	2
Radio interference class	Class B (EN 55011)
Suitable for	Branch circuits, (UL/CSA)
Type	Soft starter for three-phase loads
Voltage type	AC/DC

Ambient conditions, mechanical

Mounting position	Vertical
Shock resistance	8 g, 11 ms, Mechanical
Vibration resistance	2M2 to EN 60721-3-2

Climatic environmental conditions

Altitude	Max. 2000 m Above 1000 m with 1 % derating per 100 m
Ambient operating temperature - min	-5 °C
Ambient operating temperature - max	40 °C
Ambient storage temperature - min	-25 °C
Ambient storage temperature - max	60 °C
Climatic proofing	Damp heat, constant, to IEC 60068-2-3 Damp heat, cyclic, to IEC 60068-2-30

Main conducting paths

Overload cycle	AC-53a: 3 - 5: 75 - 10
Rated operational current (Ie) at AC-53	160 A
Rated operational voltage (Ue) - min	230 V
Rated operational voltage (Ue) - max	480 V
Short-circuit protection rating	3 x 170M5008, Type „2“ coordination (additional with the fuses for coordination type „1“), Main conducting paths NZMN2-M200, Type “1” coordination, Main conducting paths
Supply frequency	50/60 Hz, fLN, Main circuit
Voltage rating - max	480 V

Motor rating

Assigned motor power at 200/208 V, 60 Hz, 3-phase	50 HP
Assigned motor power at 220/230 V, 60 Hz, 3-phase	60 HP
Assigned motor power at 460/480 V, 60 Hz, 3-phase	125 HP
Rated operational power at 220/230 V, 50 Hz	45 kW
Rated operational power at 400 V, 50 Hz	90 kW

Terminal capacities

Terminal capacity (copper band)	10 x 16 x 0.8 mm, Main cables 2 x 9 x 0.8 mm, Main cables
Terminal capacity (flexible with ferrule)	2 x (0.5 - 0.75) mm², Control circuit cables 1 x (0.5 - 1.5) mm², Control circuit cables
Terminal capacity (solid)	2 x (4 - 70) mm², Main cables 1 x (0.5 - 2.5) mm², Control circuit cables 1 x (4 - 185) mm², Main cables 2 x (0.5 - 1.0) mm², Control circuit cables
Terminal capacity (solid/stranded AWG)	1 x (21 - 14), Control circuit cables 2 x (21 - 18), Control circuit cables 1 x (12 - 350 kcmil), Main cables 2 x (12 - 00), Main cables
Terminal capacity (stranded)	2 x (0.5 - 1.0) mm², Control circuit cables 1 x (4 - 185) mm², Main cables 2 x (4 - 70) mm², Main cables 1 x (0.5 - 1.5) mm², Control circuit cables
Screwdriver size	PZ2, 1 x 6 mm, Terminal screw, Standard screwdriver 0.6 x 3.5 mm, Terminal screws, Control circuit cables
Tightening torque	14 Nm (> 10 mm²) 0.4 Nm, Screw terminals, Control circuit cables 5 Nm (≤ 10 mm²)

Control circuit

Current consumption	0,6 A/50 ms, Control circuit, Regulator supply at peak performance (close bypass) at 24 V DC 50 mA, Control circuit, Regulator supply 1.6 mA, Control circuit, Digital inputs, External 24 V
Drop-out time	350 ms, Control circuit, Digital Inputs, DC operated
Drop-out voltage	AC operated: 0 - 3 V, AC operated 0 - 3 V, DC operated
Pick-up time	250 ms at DC 250 ms at AC
Pick-up voltage	17.3 - 27 V DC 17.3 - 27 V AC
Rated control supply voltage (Us) at AC, 50 Hz - min	24 V
Rated control supply voltage (Us) at AC, 50 Hz - max	24 V
Rated control supply voltage (Us) at AC, 60 Hz - min	24 V
Rated control supply voltage (Us) at AC, 60 Hz - max	24 V
Rated control supply voltage (Us) at DC - min	24 V
Rated control supply voltage (Us) at DC - max	24 V

Input/Output

Number of outputs	2 Relay Outputs (TOR, Ready)
Output voltage	250 V AC (relay outputs)
Protection	Finger and back-of-hand proof, Protection against direct contact
Rated control voltage (Uc)	24 V DC 24 V DC (-15 %/+10 %) 24 V AC 24 V AC (-15 %/+10 %)
Rated operational current (Ie) at AC-11	1 A

Soft start function

Application	1-phase motors: No 3-phase motors: Yes Soft starting of three-phase asynchronous motors
Delay time	0 - 30 s, Soft start function, Ramp times
Ramp/run-up time	1 - 30 s
Start voltage	Min. 30 %, Soft start function, Start voltage = turn-off voltage Max. 100 %, Soft start function, Start voltage = turn-off voltage

Design verification

Equipment heat dissipation, current-dependent Pvid	30 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Rated operational current for specified heat dissipation (In)	160 A
Static heat dissipation, non-current-dependent Pvs	30 W
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

134922
Model Code: DS7-340SX160N0-N

Spécifications générales

Features & Functions

General information

Ambient conditions, mechanical

Climatic environmental conditions

Main conducting paths

Motor rating

Terminal capacities

Control circuit

Input/Output

Soft start function

Design verification

Exporter les spécifications du produit

Brochures

Declarations of conformity

eCAD model

Guide utilisateur

Instructions d'installation

mCAD model

Schémas

134922 Model Code: DS7-340SX160N0-N

Spécifications générales

Features & Functions

General information

Ambient conditions, mechanical

Climatic environmental conditions

Main conducting paths

Motor rating

Terminal capacities

Control circuit

Input/Output

Soft start function

Design verification

Exporter les spécifications du produit

Brochures

Declarations of conformity

eCAD model

Guide utilisateur

Instructions d'installation

mCAD model

Schémas

Partageons nos grandes idées

134922
Model Code: DS7-340SX160N0-N