TAA SmartPro 208/120V 5kVA 4kW Line-Interactive Sine Wave UPS, 6U, Extended Run, Network Card Options, USB, DB9
| Product Name |
Eaton Tripp Lite series SmartPro UPS
|
| Catalog Number |
SM5000RT3UTAA
|
| UPC |
037332161475
|
| Product Length/Depth |
24 in
|
| Product Height |
24.5 in
|
| Product Width |
35 in
|
| Product Weight |
0.001 lb
|
| Compliances |
RoHS
FCC Class A TAA Compliant |
| Certifications |
UL 1778
CSA certified NOM |
| Topology |
Line-interactive
|
| Form factor |
Rackmount
|
| Rack size |
6U
|
| Package contents |
|
| Input nominal voltage |
208 VAC
|
| Nominal frequency |
60 Hz
|
| Input frequency range |
60 Hz
|
| Receptacle |
|
| Runtime at half load |
38 min
|
| Noise level |
45 dBA maximum, front side 1m
|
| Relative humidity |
0-95% non-condensing
|
| Output Receptacles |
L14-30R
5-15R L6-30R 5-15/20R |
| Product Features |
Individually Controllable Load Banks
Expandable Runtime |
| Product Highlights |
USB, RS232, EPO and slot for network communication card options
208 and 120V output during brownouts to 151V and overvoltages to 260V To use the Auto Probe feature, this product requires a WEBCARDLX network interface (sold separately) running LX firmware update 15.5.2 or later Federal Trade Agreements Act / TAA Compliant for GSA Schedule purchases NEMA L6-30P input, 10 5-15R, 2 5-15/20R, 1 L6-30R and 1 L14-30R outlets 5kVA / 5000VA / 4000W line interactive 6U rack/tower UPS, Sine wave output Expandable runtime, 8 single-outlet switched output load banks |
| PowerAlert Software |
For local monitoring via the UPS’s built-in communication ports, download PowerAlert software at https://tripplite.eaton.com/products/power-alert
|
| Network Management Cards |
WEBCARDLXE
|
| Network Management Cards Details |
Network management card optional
|
| Output power factor |
0.8
|
| Phase (input) |
Single-phase
|
| Runtime at full load |
16 min. (4000W)
|
| Communication interface |
USB
DB9 Serial Slot for SNMP / Web interface USB and DB9 serial cables included |
| Typical Battery Runtime |
Expandable Runtime
|
| EPO Port |
RJ-11 style 4-wire connection jack with included 4-wire cable to connect to facility/room EPO system
|
| Dc Voltage |
48
|
| Operating Temperature Range |
32° to 104°F (0° to 40°C)
|
| Communications Cable |
USB and DB9 cabling included
|
| Grounding Details |
Back panel grounding lug
|
| Input Circuit Breakers |
30A double-pole
|
| Optional Mounting Accessory Notes |
2 sets of 2POSTRMKITHD required for 2 post rackmount installation of separate power module and battery pack
|
| Output Circuit Breakers |
15A branch rated (x3) - 2 breakers support 5 5-15R outlets each, one breaker supports 2 5-20R outlets, L6-30R and L14-30R outlets are unbreakered
|
| Load Management Receptacles |
Eight switchable single-outlet 5-15R load banks
|
| High Voltage Transfer to Battery Power |
282V
|
| Low Voltage Transfer to Battery Power |
151V
|
| Undervoltage Correction |
Input voltages between 180V and 199 are boosted by 12%
|
| Application |
|
| Switch configuration |
2 Switches control off/on power status and alarm-cancel/self-test operation
|
| AC suppression joule rating |
1020
|
| Housing material |
Steel
|
| Output AC waveform (AC mode) |
Sine wave
|
| Output AC waveform (battery mode) |
Pure Sine wave
|
| Output Capacity (kVA) |
5
|
| Output Capacity (kW) |
4
|
| Output Capacity (VA) |
5000
|
| Output Capacity Details |
Maximum output increases to 4800W when hardwired or a user supplied 50A rated input plug is used
|
| Primary UPS Depth (mm) |
572
|
| Primary UPS Height (mm) |
132
|
| Primary UPS Width (mm) |
445
|
| AC Suppression Response Time |
Instantaneous
|
| Alarm Interface |
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
|
| Audible Alarms |
Audible alarm indicates power-failure, overload and low-battery conditions
|
| Battery Start Capability |
Cold-start operation supported
|
| Cooling Method |
Fans
|
| Battery Replacement Description |
Hot-swappable, user replaceable batteries
|
| LED Indicators |
5 LEDs indicate line power, battery power, load state, voltage regulation, and battery replace/fault status
|
| Minimum Required Rack Depth With External Battery Pack |
29.5
|
| Minimum Required Rack Depth Without External Battery Pack |
28.25
|
| Output Voltage Regulation (Line Mode) |
208 & 120V (-10%, +20%)
|
| Output Voltage Regulation(Battery Mode) |
+/- 5%
|
| Overvoltage Correction |
Input voltages between 240V and 260V are reduced by 12%
|
| Rechargeable Battery |
3 hours
|
| Recommended Electrical Service |
30A 208V
|
| Storage Temperature |
5° to 122°F (-15° to 50°C)
|
| Network Monitoring Port Description |
Supports detailed monitoring of UPS and site power conditions; 2 USB ports, 1 DB9 serial and 1 DB9 contact closure port (4 total)
|
| Nominal Voltage Details |
208/120V nominal output in battery mode
|
| Voltage Regulation Description |
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151V to 260V
|
| Minimum Required Rack Depth (cm) |
7.62
|
| Minimum Required Rack Depth (inches) |
3
|
| Unit Dimension Details |
Includes 3U UPS/power module and 3U external battery pack
|
| UPS Input Cord Length (m) |
3.1
|
| UPS Power Module Dimensions |
5.2 x 17.5 x 22.5
|
| Power Mode Transfer Time |
2-4 milliseconds
|
| Connected Equipment Insurance |
$250,000 Ultimate Lifetime Insurance
|
| Optional Accessories |
2 post rackmount (2POSTRMKITHD)
Tower (2-9USTAND) |
| EMI AC Noise Suppression |
EMI / RFI AC Noise Suppression
|
| UPS Input Connection Type |
L6-30P
|
| External Battery Pack Compatibility |
BP48V60RT3UTAA (multi-pack compatible)
|
| High Availability UPS Features |
Auto probe monitoring (requires WEBCARDLXE)
Expandable battery backup Hot swappable batteries Sine wave output Surge/noise protection Automatic voltage regulation (AVR) |
Enviar correo electrónico
Especificaciones del producto
