EDSCM Explosionproof Modular Device Bodies

Certifications and compliances

When used with DSD device sub-assemblies*

• Class I, Divisions 1 & 2, Groups C, D
• Class I, Division 2, Groups B, C, D
• Class II, Division 1, Groups E, F, G
• Class II, Division 2, Groups F, G
• Class III
• UL standard: UL1203
• CSA standard: C22.2 No. 30
• NEMA/EEMAC 3, 7B (Div. 2) CD, 9EFG

*When a CPS receptacle cover device is used, the assembly meets requirements for Class I, Groups C and D areas only.

• Reduce installation costs – a multi-gang device assembly can be installed in less time than several single-gang units
• Seals not required between gangs
• Improved appearance – no exposed conduit runs between devices
• Lightweight – 15-gang aluminum device body can be installed by one person
• Mounting feet are provided on the top and bottom of every gang to facilitate installation
• Two- and three-gang tandem bodies have 1-1/4" through feed inward horizontal hubs and 1" or 2" vertical through feed hubs; pipe plugs are installed in one horizontal hub and both vertical hubs
• Single-gang device bodies have 1" through feed inward horizontal hubs and 3/4" through feed vertical hubs; pipe plugs are installed in one horizontal hub and both vertical hubs
• All hubs are taper tapped and have integral bushings
• Close nipples, which are used to join two or more device bodies together, are furnished with EDSCM21, 32, 33, 62 and 63 units
• Any combination of bodies can be joined together horizontally

• Body – copper-free aluminum