Select your location

Configuration software (required for meter firmware update)

Configuration software for IQ 100 and IQ 200 Series Meters

Eaton's configuration software

Configure your IQ 130/140/150, IQ250/260, or IQ150S/250S. It is also required to install firmware updates these meters if you do not have a Power Xpert Meter 2000 gateway card installed.

Firmware (select one)

Firmware for IQ 100 Series Meter without Gateway Card

IQ130/140/150 Meter firmware update

This firmware update is specifically for an Eaton IQ 130, 140, or 150 meter. This file is in the .SS format and requires the Eaton Meter Configuration Software for installation. NOTE: The baud rate should be configured as 56700 for firmware upgrade.

Firmware for IQ 200 Series Meter without Gateway Card

IQ 250/260 Meter (without Power Xpert Meter 2000 gateway card) firmware update

This firmware update is designed for Eaton’s IQ 250 or 260 installed meters that do not have a Power Xpert Meter 2000 gateway card installed (you can not access it via an IP address). This update version is available to bring your meter up to the latest firmware and allows installation of a Power Xpert Meter 2000 gateway card. This file is in the .S format and requires the Eaton Meter Configuration Software for installation.