Download document () of 20
Send email
Download
You have exceeded the download limit
Eaton Moeller series NZM - Molded Case Circuit Breaker. Control circuit plug unit for remote operator
| Product Name |
Eaton Moeller series NZM plug-in unit
|
| Catalog Number |
266706
|
| Model Code |
NZM2-XSVR
|
| EAN |
4015082667061
|
| Product Length/Depth |
21 mm
|
| Product Height |
94 mm
|
| Product Width |
78 mm
|
| Product Weight |
0.12 kg
|
| Compliances |
IEC
RoHS conform |
| Certifications |
IEC/EN 60947
|
| Global Catalog |
266706
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| Frame |
NZM2(-4), N2-(4)
NZM3(-4), N3-(4) NZM4(-4), N4-(4) |
| Accessory/spare part type |
Auxiliary conductor plug and socket device
Accessory Other |
| Mounting Method |
Plug-in unit
|
| Climatic proofing |
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30 |
| Isolation |
300 V AC (between the auxiliary contacts)
|
| Ambient operating temperature - max |
70 °C
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient storage temperature - max |
70 °C
|
| Ambient storage temperature - min |
40 °C
|
| Protection against direct contact |
Finger and back-of-hand proof to VDE 0106 part 100
|
| Terminal equipment included |
Screw connection
|
| Direction of incoming supply |
As required
|
| Mounting position |
As required
|
| Number of poles |
Three-pole/Four-pole
|
| Type |
Accessory. Auxiliary conductor plug device for plug technology
|
| Special features |
Auxiliary conductor plug connector for use with plug-in units NZM...-SVE and plug-in socket NZM...-XSVS to disconnect the cables of the remote actuator
|
| Shock resistance |
20 g (half-sinusoidal shock 20 ms)
|
Product specifications
