Eaton Moeller series NZM - Molded Case Circuit Breaker. Rotary handle, red, lockable on the handle, NA type, 1
| Product Name |
Eaton Moeller series NZM operating element NA
|
| Catalog Number |
271455
|
| EAN |
4015082714550
|
| Product Length/Depth |
80 mm
|
| Product Height |
54 mm
|
| Product Width |
90 mm
|
| Product Weight |
0.148 kg
|
| Compliances |
IEC
UL/CSA RoHS conform |
| Certifications |
CSA (File No. 22086)
UL489 CSA certified CSA-C22.2 No. 5-09 UL listed UL (File No. E140305) CSA (Class No. 1437-01) UL (Category Control Number DIHS) CE marking IEC60947 |
| Model Code |
NZM1-XDTVR-NA
|
| Type |
Rotary handle on switch with door interlock
|
| Features |
Red-yellow for emergency switching off
Lockable |
| Special features |
|
| Frame |
NZM1
|
| Fitted with: |
Padlock
Extension shaft |
| Suitable for |
Switch disconnector
Power circuit breaker Emergency stop |
| Used with |
NZM1, N(S)1
|
| Color |
Red
|
| Cover/door type |
Door opens only with active rotation beyond the 0 position
Door interlock not defeated in the locked OFF and ON positions Door interlock cannot be combined with mechanical locking Door interlock in ON position Door interlock can be defeated from the outside using a 1 mm pin Door interlock can only be switched ON when the door is closed |
| Degree of protection / NEMA enclosure type |
IP40
4X. 12 |
| Locking facility |
Lockable on the 0 position on the handle using up to 3 padlocks
Also available with door interlock e.g. for MCC service distribution |
| Special features |
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Send e-mail
MyEatonFAQs
Produktspecifikationer
