Download document () of 20

How to use the easyE4 communication modules for Modbus RTU and SmartWire-DT

In this free training you will learn more about the various communication options with the easyE4 communication modules. The first part explains how Modbus RTU devices (using the DG1 variable frequency drive as an example) are processed on the easyE4 control relay via the EASY-COM-RTU-M1 communication module. 

In the second part, you will first gain an insight into Eaton's SmartWire-DT system and how it can be used in easySoft 7. This is followed by the detailed tutorial on how you can combine the advantages of the intelligent wiring system with the powerful control relay thanks to the easyE4 communication module for SmartWire-DT (EASY-COM-SWD-C1). 

Content of the tutorial:

The tutorial shows you how to process Modbus RTU devices with the EASY-COM-RTU-M1 module on an easyE4.
 
The tutorial lasts a little more than 15 minutes
  • Technical requirements for the application
  • How to use the inputs and outputs of the easyE4 and the DG1 variable-frequency drive
  • Programming of the easyE4 for this example
  • Demonstration of the application example

spacer

Content of the tutorial:

The tutorial gives you a short introduction into Smartwire-DT and shows you how to use it in easysoft 7.
 
The tutorial lasts 8 minutes
  • SmartWire-DT introduction
  • The SmartWire-DT communication module EASY-COM-SWD-C1
  • Project example

spacer

Content of the tutorial:

The tutorial shows you how to process SmartWire-DT modules using the EASY-COM-SWD-C1 module connected to an easyE4.

The tutorial lasts 7 minutes

  • Technical requirements
  • Configuration of an easyE4 with an EASY-COM-SWD-C1 module
  • Connection of an existing SmartWire-DT configuration to the easyE4 SmartWire-DT module
  • Assignment of the SmartWire-DT operands

spacer