134950 | Eaton DS7 Soft starter

General specifications

Product Name	Eaton DS7 Soft starter
Catalog Number	134950
EAN	4015081317653
Product Length/Depth	126 mm
Product Height	150 mm
Product Width	45 mm
Product Weight	0.4 kg
Certifications	IEC/EN 60947-4-2 UL 508 CSA-C22.2 No 14-05 CSA CSA-C22.2 No 0-M91 GB 14048.6 UkrSEPRO CSA22.2-14 UL C-Tick CE
Model Code	DS7-34DSX032N0-D

Features & Functions

Fault memory	8 Faults
Fitted with:	Internal bypass Internal bypass contacts
Functions	Current limitation, with PKE Min. ramp time 1 s - fast switching (semiconductor contactor) Suppression of closing transients Soft start function Potential isolation between power and control sections Single direction Suppression of DC components for motors
Interfaces	SmartWire-DT (built-in)

General information

Class	Other
Connection to SmartWire-DT	Yes
Degree of protection	NEMA 1 IP20
Frame size	FS2
Mains voltage - min	200 V
Mains voltage - max	480 V
Overvoltage category	II
Pollution degree	2
Product category	SmartWire-DT slave
Product category	SmartWire-DT slave
Radio interference class	Class B (EN 55011)
Suitable for	Branch circuits, (UL/CSA)
Type	Soft starter for three-phase loads
Voltage type	DC

Ambient conditions, mechanical

Mounting position	Vertical
Shock resistance	8 g, 11 ms, Mechanical
Vibration resistance	2M2 to EN 60721-3-2

Climatic environmental conditions

Altitude	Above 1000 m with 1 % derating per 100 m Max. 2000 m
Ambient operating temperature - min	-5 °C
Ambient operating temperature - max	40 °C
Ambient storage temperature - min	-25 °C
Ambient storage temperature - max	60 °C
Climatic proofing	Damp heat, cyclic, to IEC 60068-2-30 Damp heat, constant, to IEC 60068-2-3

Main conducting paths

Overload cycle	AC-53a: 3 - 5: 75 - 10
Rated operational current (Ie) at AC-53	32 A
Rated operational voltage (Ue) - min	230 V
Rated operational voltage (Ue) - max	480 V
Short-circuit protection rating	3 x 170M1366, Type „2“ coordination (additional with the fuses for coordination type „1“), Main conducting paths PKM0-32 (+ CL-PKZ0), Type “1” coordination, Main conducting paths
Supply frequency	50/60 Hz, fLN, Main circuit
Voltage rating - max	480 V

Motor rating

Assigned motor power at 200/208 V, 60 Hz, 3-phase	10 HP
Assigned motor power at 220/230 V, 60 Hz, 3-phase	10 HP
Assigned motor power at 460/480 V, 60 Hz, 3-phase	25 HP
Rated operational power at 220/230 V, 50 Hz	7.5 kW
Rated operational power at 400 V, 50 Hz	15 kW

Terminal capacities

Terminal capacity (flexible with ferrule)	2 x (0.5 - 0.75) mm², Control circuit cables 1 x (0.5 - 1.5) mm², Control circuit cables 1 x (0.75 - 16) mm², Main cables 2 x (0.75 - 10) mm², Main cables
Terminal capacity (solid)	2 x (0.5 - 1.0) mm², Control circuit cables 1 x (0.75 - 16) mm², Main cables 2 x (0.75 - 10) mm², Main cables 1 x (0.5 - 2.5) mm², Control circuit cables
Terminal capacity (solid/stranded AWG)	18 - 6, Main cables 18 - 14, Control circuit cables
Terminal capacity (stranded)	1 x 16 mm², Main cables
Screwdriver size	PZ2, 1 x 6 mm, Terminal screw, Standard screwdriver 0.6 x 5.5 mm/1 x 6 mm, Terminal screws, Control circuit cables
Tightening torque	3.2 Nm 1.2 Nm, Screw terminals, Control circuit cables

Control circuit

Current consumption	50 mA, Control circuit, Regulator supply 1.6 mA, Control circuit, Digital inputs, External 24 V
Drop-out time	350 ms, Control circuit, Digital Inputs, DC operated
Drop-out voltage	0 - 3 V, DC operated
Pick-up time	250 ms at DC
Pick-up voltage	17.3 - 27 V DC
Rated control supply voltage (Us) at AC, 50 Hz - min	0 V
Rated control supply voltage (Us) at AC, 50 Hz - max	0 V
Rated control supply voltage (Us) at AC, 60 Hz - min	0 V
Rated control supply voltage (Us) at AC, 60 Hz - max	0 V
Rated control supply voltage (Us) at DC - min	24 V
Rated control supply voltage (Us) at DC - max	24 V

Input/Output

Number of outputs	2 Relay Outputs (TOR, Ready)
Output voltage	250 V AC (relay outputs)
Protection	Finger and back-of-hand proof, Protection against direct contact
Rated control voltage (Uc)	24 V DC 24 V DC (-15 %/+10 %) or via SmartWire-DT
Rated operational current (Ie) at AC-11	1 A

Soft start function

Application	1-phase motors: No 3-phase motors: Yes Soft starting of three-phase asynchronous motors
Current limitation	(0 - 8) x Ie, Soft start function
Delay time	0 - 30 s, Soft start function, Ramp times
Ramp/run-up time	1 - 30 s
Start voltage	Min. 30 %, Soft start function, Start voltage = turn-off voltage Max. 100 %, Soft start function, Start voltage = turn-off voltage

Design verification

Equipment heat dissipation, current-dependent Pvid	1.5 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Rated operational current for specified heat dissipation (In)	32 A
Static heat dissipation, non-current-dependent Pvs	1.5 W
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

134950
Modellkód: DS7-34DSX032N0-D

General specifications

Features & Functions

General information

Ambient conditions, mechanical

Climatic environmental conditions

Main conducting paths

Motor rating

Terminal capacities

Control circuit

Input/Output

Soft start function

Design verification

Termékjellemzők exportja

Brossúrák

eCAD model

Felhasználói kézikönyvek

mCAD model

Megfelelőségi nyilatkozatok

Rajzok

Telepítési útmutató

Közös munkára tervezve

134950 Modellkód: DS7-34DSX032N0-D

General specifications

Features & Functions

General information

Ambient conditions, mechanical

Climatic environmental conditions

Main conducting paths

Motor rating

Terminal capacities

Control circuit

Input/Output

Soft start function

Design verification

Termékjellemzők exportja

Brossúrák

eCAD model

Felhasználói kézikönyvek

mCAD model

Megfelelőségi nyilatkozatok

Rajzok

Telepítési útmutató

Közös munkára tervezve

BESZÉLJÜNK NAGY DOLGOKRÓL

134950
Modellkód: DS7-34DSX032N0-D