Eaton Moeller® series DILH Contactor, Ith =Ie: 850 A, 220 - 240 V 50/60 Hz, AC operation, Screw connection
| Product Name |
Eaton Moeller® series DILH contactor
|
| Catalog Number |
197909
|
| EAN |
4015081954285
|
| Product Length/Depth |
216 mm
|
| Product Height |
237 mm
|
| Product Width |
160 mm
|
| Product Weight |
8.85 kg
|
| Certifications |
CSA Class No.: 3211-04
VDE 0660 IEC/EN 60947-4-1 UL File No.: E29096 CE marking UL Category Control No.: NLDX UL 60947-4-1 UL/CSA CSA file No. 012528 North America (UL listed, CSA certified) EN 45545: Fire protection on railway vehicles IEC 61373: Vibration and shock, tested for category 1 class B |
| Catalog Notes |
|
| Model Code |
DILH600-S/22(220-240V50/60HZ)
|
| Accessories |
Fitting options auxiliary contacts: on the side: 2 x DILM820-XHI11(V)-SI; 2 x DILM820-XHI11-SA
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| Fitted with: |
Suppressor circuit in actuating electronics
|
| Operating frequency |
1000 mechanical Operations/h (DC operated)
1000 mechanical Operations/h (AC operated) |
| Pollution degree |
3
|
| Utilization category |
AC-1: Non-inductive or slightly inductive loads, resistance furnaces
|
| Climatic proofing |
Damp heat, cyclic, to IEC 60068-2-30
Damp heat, constant, to IEC 60068-2-78 |
| Rated impulse withstand voltage (Uimp) |
12000 V
|
| Connection |
Screw terminals
|
| Ambient operating temperature - max |
70 °C
|
| Ambient operating temperature - min |
-40 °C
|
| Ambient storage temperature - max |
80 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Conventional thermal current Ith (3-pole, enclosed) |
600 A
|
| Conventional thermal current Ith at 55°C (3-pole, open) |
725 A
|
| Conventional thermal current Ith of main contacts (1-pole, open) |
1738 A
|
| Equipment heat dissipation, current-dependent Pvid |
0 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Application |
Mains contactors for resistive loads from 1000 A
|
| Product category |
Contactors
|
| Electrical connection type of main circuit |
Rail connection
|
| Screwdriver size |
2, Terminal screw, Pozidriv screwdriver
0.8 x 5.5/1 x 6 mm, Terminal screw, Control circuit cables, Standard screwdriver |
| Voltage type |
AC
|
| Degree of protection |
IP00
|
| Number of auxiliary contacts (normally closed contacts) |
2
|
| Number of auxiliary contacts (normally open contacts) |
2
|
| Number of contacts (normally closed) as main contact |
0
|
| Number of main contacts (normally open contact) |
3
|
| Rated breaking capacity at 1000 V |
1575 A
|
| Rated breaking capacity at 220/230 V |
4800 A
|
| Rated breaking capacity at 380/400 V |
4800 A
|
| Rated breaking capacity at 500 V |
4800 A
|
| Rated breaking capacity at 660/690 V |
2000 A
|
| Rated control supply voltage (Us) at AC, 50 Hz - max |
120 V
|
| Rated control supply voltage (Us) at AC, 50 Hz - min |
110 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - max |
120 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - min |
110 V
|
| Overvoltage category |
III
|
| Behavior in marginal and transitional conditions |
Sealing - Voltage interruptions (0 - 0.2 x Uc min ≤ 10 ms: Time is bridged specifically
Sealing - Pick-up phase (0.7 x Uc min - 1.15 x Uc max): Contactor switches on properly Sealing - Excess voltage (1.15 - 1.3 x Uc max): Contactor remains switched on Sealing - Voltage drops (0.2 - 0.6 x Uc min) > 12 ms: Drop-out of the contactor Sealing - Voltage interruptions 0 - 0.2 x Uc min) > 10 ms: Drop-out of the contactor Sealing - Voltage drops (0.2 - 0.6 x Uc min ≤12 ms: Time is bridged specifically Sealing - Pick-up phase (0 - 0.7 x Uc min: Contactor does not switch on Sealing - Voltage drops (0.6 - 0.7 x Uc min: Contactor remains switched on |
| Duty factor |
100 %
|
| Electromagnetic compatibility |
Designed for operation in industrial environments. Its use in residential environments may cause radio-frequency interference, requiring additional noise suppression.
|
| Lifespan, mechanical |
3,000,000 Operations (DC operated)
3,000,000 Operations (AC operated) |
| Pick-up voltage |
0.85 - 1.1 V AC x Us
|
| Power consumption, pick-up, 50 Hz |
715 VA, Pull-in power, Coil in a cold state and 1.0 x Us
645 W, Pull-in power, Coil in a cold state and 1.0 x Us |
| Safe isolation |
1000 V AC, Between coil and contacts, According to EN 61140
|
| Power consumption, pick-up, 60 Hz |
645 W, Pull-in power, Coil in a cold state and 1.0 x Us
715 VA, Pull-in power, Coil in a cold state and 1.0 x Us |
| Screw size |
M3.5, Terminal screw
M10, Terminal screw |
| Power consumption, sealing, 50 Hz |
3.3 W, Coil in a cold state and 1.0 x Us
|
| Power consumption, sealing, 60 Hz |
3.3 W, Coil in a cold state and 1.0 x Us
|
| Resistance |
500 mΩ (Admissible transitional contact resistance - of the external control circuit device when actuating A11)
|
| Switching capacity (auxiliary contacts, general use) |
10 A, 600 V AC, (UL/CSA)
1 A, 250 V DC, (UL/CSA) |
| Switching capacity (auxiliary contacts, pilot duty) |
P300, DC operated (UL/CSA)
A600, AC operated (UL/CSA) |
| Terminal capacity (flexible with ferrule) |
1 x (0.75 - 2.5) mm²
2 x (0.75 - 2.5) mm² |
| Shock resistance |
10 g, N/O auxiliary contact, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms
8 g, N/C auxiliary contact, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms 10 g, N/O main contact, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms |
| Terminal capacity (solid) |
2 x (0.75 - 2.5) mm²
1 x (0.75 - 2.5) mm² |
| Terminal capacity (solid/stranded AWG) |
18 - 14
|
| Signal level |
5 V - 15 V, PLC signal level (A3 - A4) to IEC/EN 61131-2 (type 2), Magnet systems
|
| Terminal capacity (busbar) |
50 mm width, Main connection
|
| Terminal capacity (flexible with cable lug) |
50 - 240 mm²
|
| Switching capacity (main contacts, general use) |
700 A, Maximum motor rating (UL/CSA)
|
| Terminal capacity (stranded with cable lug) |
70 - 240 mm²
|
| Power consumption |
Control transformer with uk ≤ 7%
|
| Tightening torque |
1.2 Nm, Screw terminals
24 Nm, Main cable connection screw/bolt |
| Width across flats |
16 mm
|
| Rated control supply voltage (Us) at DC - max |
0 V
|
| Rated control supply voltage (Us) at DC - min |
0 V
|
| Rated insulation voltage (Ui) |
1000 V
|
| Rated making capacity up to 440 V (cos phi to IEC/EN 60947) |
6000 A
|
| Rated operational current (Ie) at AC-3, 380 V, 400 V, 415 V |
0 A
|
| Rated operational current (Ie) at AC-4, 400 V |
0 A
|
| Rated operational current for specified heat dissipation (In) |
650 A
|
| Rated operational power at AC-3, 380/400 V, 50 Hz |
0 kW
|
| Rated operational power at AC-4, 380/400 V, 50 Hz |
0 kW
|
| Rated operational power (NEMA) |
0 kW
|
| Rated operational voltage (Ue) at AC - max |
1000 V
|
| Static heat dissipation, non-current-dependent Pvs |
3.3 W
|
| Stripping length (control circuit cable) |
10 mm
|
| Switching time (AC operated, make contacts, closing delay) - max |
60 ms
|
| Switching time (AC operated, make contacts, opening delay) - max |
50 ms
|
| Conventional thermal current Ith at 40°C (3-pole, open) |
850 A
|
| Conventional thermal current Ith at 50°C (3-pole, open) |
760 A
|
| Conventional thermal current Ith at 60°C (3-pole, open) |
695 A
|
| Altitude |
Max. 2000 m
|
| Operating voltage at AC, 50 Hz - min |
220 V
|
| Operating voltage at AC, 50 Hz - max |
240 V
|
| Operating voltage at AC, 60 Hz - min |
220 V
|
| Operating voltage at AC, 60 Hz - max |
240 V
|
שלח הודעת דוא"ל
מפרטי מוצר
