Eaton EASY Communication module for connecting the easy control relay as SWD coordinator in SmartWire-DT applications, screw terminal
| Product Name |
Eaton Moeller® series EASY Accessory Bus module
|
| Catalog Number |
199452
|
| EAN |
4015081978434
|
| Product Length/Depth |
58 mm
|
| Product Height |
90 mm
|
| Product Width |
36 mm
|
| Product Weight |
0.1 kg
|
| Certifications |
IEC 60068-2-27
IEC 60068-2-6 IEC/EN 61131-2 IEC/EN 61000-4-2 IEC/EN 61000-6-2 IEC/EN 61000-6-3 EN 61010 EN 50178 CE UL Listed UL File No.: E205091 UL hazardous location group C (ethylene) UL hazardous location group A (acetylene) UL hazardous location group B (hydrogen) UL hazardous location class I UL hazardous location group D (propane) UL hazardous location division 2 |
| Catalog Notes |
Current consumption at 24 V DC
|
| Model Code |
EASY-COM-SWD-C1
|
| Features |
Expansion device
Expandable |
| Degree of protection |
IP20
|
| Insulation resistance |
According to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201
|
| Mounting method |
Front build in possible
Screw fixing using fixing brackets ZB4-101-GF1 (accessories) Top-hat rail fixing (according to IEC/EN 60715, 35 mm) Wall mounting/direct mounting Rail mounting possible |
| Overvoltage category |
II
|
| Pollution degree |
2
|
| Product category |
Control relays easyE4
|
| Protocol |
TCP/IP
Other bus systems |
| Residual ripple |
≤ 5 %
≤ 5 % (input voltage) |
| Type |
Communication module
|
| Voltage type |
DC
|
| Drop and topple |
50 mm Drop height, Drop to IEC/EN 60068-2-31
|
| Height of fall (IEC/EN 60068-2-32) - max |
0.3 m
|
| Mounting position |
Horizontal
Vertical |
| Shock resistance |
15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 18 Impacts
|
| Air pressure |
795 - 1080 hPa (operation)
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
55 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Ambient storage temperature - max |
70 °C
|
| Environmental conditions |
Clearance in air and creepage distances according to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201
Condensation: prevent with appropriate measures |
| Relative humidity |
5 - 95 % (IEC 60068-2-30, IEC 60068-2-78)
|
| Air discharge |
8 kV
|
| Burst impulse |
1 kV, SmartWire-DT cable, Signal cable, according to IEC/EN 61131-2, Level 3
|
| Contact discharge |
6 kV, Electrostatic discharge (ESD)
|
| Electromagnetic fields |
1 V/m at 2 - 2.7 GHz (according to IEC EN 61000-4-3)
10 V/m at 0.08 - 1.0 GHz (according to IEC EN 61000-4-3) 3 V/m at 1.4 - 2 GHz (according to IEC EN 61000-4-3) |
| Immunity to line-conducted interference |
10 V (according to IEC/EN 61000-4-6)
|
| Radio interference class |
Class B (EN 61000-6-3)
|
| Surge rating |
1 kV, Supply cables, asymmetrical, power pulses (Surge), EMC
According to IEC/EN 61000-4-5, power pulses (Surge), EMC 0.5 kV, Supply cables, symmetrical, power pulses (Surge), EMC |
| Voltage dips |
According to EN 61131-2
≤ 10 ms |
| Terminal capacity |
0.2 - 4 mm² (AWG 22 - 12), solid
0.2 - 2.5 mm² (22 - 12 AWG), flexible with ferrule |
| Screwdriver size |
3.5 x 0.8 mm, Terminal screw
|
| Tightening torque |
0.6 Nm, Screw terminals
|
| Heat dissipation |
1 W (at 24 V DC)
|
| Inrush current |
12.5 A (for 6 ms)
|
| Power consumption |
14.5 W
|
| Rated control supply voltage |
24 V DC (UAUX, -15 %/+20 %)
20.4 - 28.8 V DC |
| Rated operational voltage |
24 V DC (-15 %/+ 20 % - power supply)
|
| Supply current |
0.7 A, Imax, SmartWire-DT supply
2 A (UL), Imax, Supply voltage UAux |
| Supply voltage at AC, 50 Hz - min |
0 VAC
|
| Supply voltage at AC, 50 Hz - max |
0 VAC
|
| Supply voltage at DC - min |
20.4 VDC
|
| Supply voltage at DC - max |
28.8 VDC
|
| Voltage rating |
24 Vdc
|
| Short-circuit protection |
No, Short-circuit rating, Supply voltage UAux
Yes, SmartWire-DT supply voltage ≥ 3 A (T) (e.g. FAZ C3), Fuse, Power supply |
| Addressing |
Address set automatically via Configuration button
|
| Bus termination |
Integrated in the device, SmartWire-DT
With SWD4-RC8-10, SmartWire-DT line end |
| Connection |
SmartWire-DT blade terminal SWD4-8MF2
|
| Connection type |
SWD: Plug, 8-pole
Screw terminal |
| Data transfer rate |
125 kBit/s, SmartWire-DT
250 kBit/s, SmartWire-DT |
| LED indicator |
Status indication of SmartWire-DT master: Green and red LEDs
|
| Station |
SmartWire-DT master, SmartWire-DT network
|
| Input current |
500 mA (Uₑ)
|
| Number of inputs (analog) |
0
|
| Number of inputs (digital) |
0
|
| Number of outputs (analog) |
0
|
| Number of outputs (digital) |
0
|
| Output voltage |
Uₑ - 0.3 V (SWD-OUT, Supply voltage UAUX)
|
| Explosion safety category for gas |
None
|
| Potential isolation |
Between SmartWire-DT supply voltage and Power supply POW: no
Between SmartWire-DT supply voltage and AUX: yes Between Supply voltage UAUX and SmartWire-DT: yes Between supply voltage UAUX and Power supply POW: yes Between SmartWire-DT supply voltage and COM Interface: yes |
| Protection against polarity reversal |
Yes
|
| Explosion safety category for dust |
None
|
| Equipment heat dissipation, current-dependent Pvid |
10.5 W
|
| Static heat dissipation, non-current-dependent Pvs |
4 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Meets the product standard's requirements.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
bdeSendEmail
מפרטי מוצר
