177039

General specifications

Product Name	Eaton DA1 Variable frequency drive
Catalog Number	177039
EAN	4015081714827
Product Length/Depth	204 mm
Product Height	273 mm
Product Width	131 mm
Product Weight	3.5 kg
Certifications	IEC/EN61800-5 RCM UkrSEPRO UL Category Control No.: NMMS, NMMS7 UL File No.: E172143 CSA-C22.2 No. 14 IEC/EN61800-3 Specification for general requirements: IEC/EN 61800-2 CE Certified by UL for use in Canada IEC/EN 61800-3 UL 508C RoHS, ISO 9001 UL Safety: EN 61800-5-1: 2003 CUL UL report applies to both US and Canada EAC
Catalog Notes	The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request.

Especificaciones del producto

Product Category	Variable frequency drives
Features	Parameterization: Fieldbus Parameterization: Keypad Parameterization: drivesConnect Parameterization: drivesConnect mobile (App)
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
Fitted with:	Brake chopper PC connection IGBT inverter 7-digital display assembly Breaking resistance Internal DC link Control unit Additional PCB protection
Climatic proofing	< 95 average relative humidity (RH), no condensation, no corrosion
Connection to SmartWire-DT	In conjunction with DX-NET-SWD1 SmartWire DT module Yes
Operating mode	U/f control Optional: Vector control with feedback (CLV) Sensorless vector control (SLV) Speed control with slip compensation
Frame size	FS3
Altitude	Max. 4000 m Max. 1000 m Above 1000 m with 1 % derating per 100 m
Environmental class	3C2, 3S2 (Air quality)
Application in domestic and commercial area permitted	Yes
Mains switch-on frequency	Maximum of one time every 30 seconds
Application in industrial area permitted	Yes
Ambient operating temperature - max	50 °C
Ambient operating temperature - min	-10 °C
Ambient operating temperature at 150% overload - max	50 °C
Ambient operating temperature at 150% overload - min	-10 °C
Ambient storage temperature - max	60 °C
Ambient storage temperature - min	-40 °C
Apparent power at 600 V	12.47 kVA
Mounting position	Vertical
Relative symmetric net frequency tolerance	10 %
Relative symmetric net voltage tolerance	10 %
Protection	Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
Heat dissipation details	Operation (with 150 % overload)
Rated operational power at 525 V, 50 Hz, 3-phase	7.5 kW
Resolution	0.1 Hz (Frequency resolution, setpoint value)
Static heat dissipation, non-current-dependent Pvs	0 W
Switch-on threshold for the braking transistor	975 VDC
Voltage rating - max	600 VAC
Communication interface	CANopen®, built in PROFINET, optional DeviceNet, optional Modbus-TCP, optional EtherCAT, optional Modbus RTU, built in PROFIBUS, optional SmartWire-DT, optional OP-Bus (RS485), built in Ethernet IP, optional
Converter type	U converter
Degree of protection	IP20 NEMA Other
Protocol	EtherNet/IP Other bus systems PROFIBUS DeviceNet CAN MODBUS PROFINET IO TCP/IP
Assigned motor current IM at 500 V, 50 Hz, 150% overload	12 A
Assigned motor current IM at 525 V, 50 Hz, 150% overload	11.6 A
Assigned motor current IM at 550 - 600 V, 60 Hz, 150% overload	11 A
System configuration type	AC supply systems with earthed center point
Assigned motor power at 575/600 V, 60 Hz, 3-phase	10 HP
Braking resistance	80 Ω
Equipment heat dissipation, current-dependent Pvid	225 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Input current ILN at 150% overload	15.1 A
Braking torque	Max. 30 % MN, Standard - Main circuit Max. 100 % of rated operational current Ie, variable, DC - Main circuit Max. 100 % of rated operational current Ie with external braking resistor - Main circuit
Cable length	200 m, screened, with motor choke, maximum permissible, Motor feeder 100 m, screened, maximum permissible, Motor feeder 300 m, unscreened, with motor choke, maximum permissible, Motor feeder 150 m, unscreened, maximum permissible, Motor feeder
Functions	4-quadrant operation possible
Output voltage (U2)	600 V AC, 3-phase 500 V AC, 3-phase
Number of inputs (analog)	2
Number of inputs (digital)	5
Number of outputs (digital)	2
Starting current - max	200 %, IH, max. starting current (High Overload), for 4 seconds every 40 seconds, Power section
Number of phases (input)	3
Number of relay outputs	2 (parameterizable, 1 N/O and 1 changeover contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
Number of phases (output)	3
Power consumption	225 W
Rated control supply voltage	10 V DC (Us, max. 10 mA)
Efficiency	97 % (η)
Rated control voltage (Uc)	24 V DC (external, max. 100 mA)
Supply frequency	50/60 Hz
Leakage current at ground IPE - max	12 mA
Mains voltage - max	600 V
Mains voltage - min	500 V
Nominal output current I2N	12 A
Number of HW-interfaces (industrial ethernet)	0
Number of HW-interfaces (other)	0
Number of HW-interfaces (parallel)	0
Number of HW-interfaces (RS-232)	0
Number of HW-interfaces (RS-422)	0
Number of HW-interfaces (RS-485)	1
Number of HW-interfaces (serial TTY)	0
Number of HW-interfaces (USB)	0
Number of interfaces (PROFINET)	0
Number of outputs (analog)	2
Output at linear load at rated output voltage - max	7.5 kW
Output at quadratic load at rated output voltage - max	7.5 kW
Output frequency - max	500 Hz
Output frequency - min	0 Hz
Output voltage - max	600 V
Overload current IL at 150% overload	18 A
Suitable for	Branch circuits, (UL/CSA)
Switching frequency	8 kHz, 4 - 24 kHz adjustable (audible), fPWM, Power section, Main circuit
Rated operational voltage	500 V AC, 3-phase 600 V AC, 3-phase
Short-circuit protection rating	25 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
Rated frequency - max	62 Hz
Rated frequency - min	48 Hz
Rated operational current (Ie) at 150% overload	12 A
Rated operational current for specified heat dissipation (In)	12 A
Rated operational power at 500 V, 50 Hz, 3-phase	7.5 kW
Safety function/level	STO (Safe Torque Off, SIL2, PLc Cat 2)
Short-circuit protection	NH fuse used together with TB00-D fuse base, Power wiring, Assigned switching and protective elements LPJ fuse used together with J60060-3 fuse base, Power wiring, Assigned switching and protective elements
Heat dissipation at current/speed	129 W at 100% current and 0% speed 136 W at 100% current and 50% speed 163 W at 100% current and 90% speed 86 W at 25% current and 0% speed 86 W at 50% current and 0% speed 88 W at 25% current and 50% speed 88 W at 50% current and 50% speed 96 W at 50% current and 90% speed

Designed to work together

Discover other Eaton products and accessories built to enhance this product.

General specifications

Especificaciones del producto

Exportar especificación del producto

Declarations of conformity

Dibujos

eCAD model

Folletos

Instrucciones de instalación

Manuales y guías de uso

mCAD model

Videos de instalación

Designed to work together

177039

General specifications

Especificaciones del producto

Exportar especificación del producto

Declarations of conformity

Dibujos

eCAD model

Folletos

Instrucciones de instalación

Manuales y guías de uso

mCAD model

Videos de instalación

Designed to work together

Hablemos sobre temas de gran impacto