Eaton XC XC303 modular PLC, small PLC, programmable CODESYS 3, SD Slot, Ethernet, CAN
| Product Name |
Eaton XC Modular PLC
|
| Catalog Number |
191082
|
| EAN |
4015081915682
|
| Product Length/Depth |
108 mm
|
| Product Height |
65 mm
|
| Product Width |
85 mm
|
| Product Weight |
0.28 kg
|
| Certifications |
CE
EN 61131 UL listed EAC UL File No.: E205091 cULus Listed |
| Catalog Notes |
Protective devices must be installed directly at the inductive load in order to prevent interference.
|
| Model Code |
XC-303-C11-000
|
| Height of fall (IEC/EN 60068-2-32) - max |
1 m
|
| Mounting position |
Vertical (on horizontal top-hat rail)
|
| Shock resistance |
15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 9 Impacts
|
| Vibration resistance |
5 - 8.4 / 8.4 -150 Hz, 3,5 mm / 1 g
|
| Air pressure |
795 - 1080 hPa (operation)
|
| Ambient operating temperature - max |
55 °C
|
| Ambient storage temperature - max |
80 °C
|
| Ambient operating temperature - min |
-20 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Climatic proofing |
Damp heat, constant, to IEC 60068-2-3
Dry heat to IEC 60068-2-2 |
| Environmental conditions |
Condensation: prevent with appropriate measures
|
| Relative humidity |
< 95 % (non-condensing)
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Meets the product standard's requirements.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| Heat dissipation details |
The max. heat dissipation is specified as the maximum power produced inside the device's housing.
|
| Static heat dissipation, non-current-dependent Pvs |
8 W
|
| Air discharge |
8 kV/4 kV, Air/contact discharge, ESD
|
| Burst impulse |
1 kV, Signal cable
2 kV, Supply cable |
| Electromagnetic fields |
10 V/m at 0.08 - 1.0 GHz (according to IEC EN 61000-4-3)
1 V/m at 2 - 2.7 GHz (according to IEC EN 61000-4-3) 3 V/m at 1.4 - 2 GHz (according to IEC EN 61000-4-3) |
| Emitted interference |
40 dB (at 30 - 230 MHz, Class A, radiated, high frequency)
47 dB (at 230 - 1000 MHz, Class A, radiated, high frequency) |
| Radiated RFI |
10 V
|
| Surge rating |
0.5/0.5 kV, Supply cable, balanced/unbalanced), EMC
1 kV, Signal cable, unbalanced, EMC |
| Features |
Short-circuit protection (digital outputs)
|
| Functions |
Additional program memory possible
Cable redundancy in the EtherCAT network using a ring topology |
| Connection type |
Push-in spring-cage terminal, Connection design in TOP direction
|
| Degree of protection |
IP20
|
| Memory capacity |
512,000 kByte
|
| Model |
Modular
|
| Mounting method |
Rail mounting possible
|
| Overvoltage category |
II
|
| Pollution degree |
2
|
| Protocol |
MODBUS
CAN Other bus systems TCP/IP EtherNet/IP |
| Rated operational voltage |
24 V
160 V (terminations) |
| Voltage type |
DC
|
| Delay time |
200 µs, Digital outputs, Delay on signal change and resistive load, from Low to High signal
200 µs, Digital outputs, Delay on signal change and resistive load, from High to Low signal |
| Digital outputs |
Note: Protective devices must be installed directly at the inductive load in order to prevent interference.
|
| Input current |
≥ 2.3 mA (Digital inputs, high level)
2 mA (Ie) ≤ 1.1 mA (Digital inputs, low level) |
| Input delay |
300 µs (rising edge)
300 µs (falling edge) |
| Load current |
Max. 6 A per 1.5 mm² (cross-sectional area)
|
| Number of inputs (analog) |
0
|
| Number of inputs (digital) |
0
|
| Number of outputs (analog) |
0
|
| Number of outputs (digital) |
0
|
| Number of relay outputs |
0
|
| Rated operational current (Ie) |
2.8 A (supply input)
|
| Utilization factor |
100 % (Ʃ IAmax = 2A)
|
| Number of channels |
4, Digital Outputs
|
| Heat dissipation |
0.05 W (Digital inputs according to EN61131-2 Type 1, per active channel)
0.1 W (Digital outputs, internal, per active channel) |
| Input voltage |
15 - 30 V (Digital inputs, high level)
24 V DC (Digital inputs) 0 - 5 V (Digital inputs, low level) |
| Output current |
0.5 A
|
| Supply voltage at DC - max |
30 VDC
|
| Supply voltage at DC - min |
18 VDC
|
| Voltage dips |
Voltage dips: 10 ms/Voltage fluctuations: Yes
|
| Explosion safety category for dust |
None
|
| Explosion safety category for gas |
None
|
| Potential isolation |
Between Digital inputs: no
Between Digital outputs: no |
| Gauge pin |
A1 (according to IEC/EN 60947-1)
|
| Insulating material group |
I
|
| Stripping length (main cable) |
10 mm
|
| Terminal capacity (AWG) |
24 - 16
|
| Terminal capacity (flexible with ferrule) |
0.25 - 1.5 mm², with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.25 - 1.5 mm², with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
| Terminal capacity (flexible) |
0.2 - 1.5 mm², H 07V-K
|
| Terminal capacity (solid) |
0.2 - 1.5 mm², H07V-U
|
E-postayı Gönder
MyEaton: Sıkça Sorulan Sorular
Ürün teknik özellikleri
