Eaton DE1 Variable speed starter, Rated operational voltage 230 V AC, 1-phase, Ie 4.3 A, 0.75 kW, 1 HP, Radio interference suppression filter
| Product Name |
Eaton DE1 Variable speed starter
|
| Catalog Number |
174330
|
| Model Code |
DE1-124D3FN-N20N
|
| EAN |
4015081707928
|
| Product Length/Depth |
169 mm
|
| Product Height |
230 mm
|
| Product Width |
45 mm
|
| Product Weight |
1.06 kg
|
| Certifications |
UL report applies to both US and Canada
CSA-C22.2 No. 14 CUL IEC/EN 61800-3 Safety requirements: IEC/EN 61800-5-1 UL File No.: E172143 Certified by UL for use in Canada IEC/EN61800-5 UL Category Control No.: NMMS, NMMS7 UL 508C CE RCM IEC/EN61800-3 Specification for general requirements: IEC/EN 61800-2 RoHS, ISO 9001 UL |
| Catalog Notes |
Overload cycle for 60 s every 600 s
|
| Global Catalog |
174330
|
| Features |
Parameterization: drivesConnect
Parameterization: drivesConnect mobile (App) Parameterization: Fieldbus Parameterization: Keypad |
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| Fitted with: |
Radio interference suppression filter
PC connection |
| Climatic proofing |
< 95 average relative humidity (RH), no condensation, no corrosion
|
| Connection to SmartWire-DT |
Yes
In conjunction with DX-NET-SWD3 SmartWire DT module |
| Operating mode |
Speed control with slip compensation
U/f control |
| Rated impulse withstand voltage (Uimp) |
2000 V
|
| Frame size |
FS1
|
| Altitude |
Max. 2000 m
Above 1000 m with 1 % derating per 100 m |
| Application in domestic and commercial area permitted |
Yes
|
| Mains switch-on frequency |
Maximum of one time every 30 seconds
|
| Ambient operating temperature - max |
60 °C
|
| Ambient operating temperature - min |
-10 °C
|
| Mains voltage - max |
240 V
|
| Output voltage - max |
250 V
|
| Rated operational power at 220/230 V, 50 Hz, 3-phase |
0.75 kW
|
| Relative symmetric net frequency tolerance |
10 %
|
| Relative symmetric net voltage tolerance |
10 %
|
| Ambient operating temperature at 150% overload - max |
60 °C
|
| Ambient operating temperature at 150% overload - min |
-10 °C
|
| Ambient storage temperature - max |
70 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Apparent power at 230 V |
1.71 kVA
|
| Apparent power at 240 V |
1.79 kVA
|
| Application in industrial area permitted |
Yes
|
| Product category |
Variable speed starter
|
| Protection |
Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
|
| Resolution |
0.025 Hz (Frequency resolution, setpoint value)
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| Voltage rating - max |
240 V
|
| Mounting position |
Vertical
|
| Overvoltage category |
III
|
| Communication interface |
OP-Bus (RS485), built in
Modbus RTU, built in |
| Converter type |
U converter
|
| Degree of protection |
IP20
NEMA Other |
| Assigned motor power at 220/230 V, 60 Hz, 3-phase |
1 HP
|
| Equipment heat dissipation, current-dependent Pvid |
32 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Input current ILN at 150% overload |
11.3 A
|
| Mains current distortion |
120 %
|
| Assigned motor current IM at 220 - 240 V, 60 Hz, 150% overload |
3.2 A
|
| Assigned motor current IM at 230 V, 50 Hz, 150% overload |
3.2 A
|
| Protocol |
MODBUS
EtherNet/IP Other bus systems |
| Overload current IL at 150% overload |
6.45 A
|
| Rated frequency - max |
66 Hz
|
| Rated frequency - min |
45 Hz
|
| Rated operational current for specified heat dissipation (In) |
4.3 A
|
| Braking current |
≤ 0.6 A (max. 6 A for 120 ms), Actuator for external motor brake
|
| Electromagnetic compatibility |
1st and 2nd environments (according to EN 61800-3)
|
| Braking torque |
Max. 30 % MN, Standard - Main circuit
Adjustable to 100 %, DC - Main circuit |
| Cable length |
C1 ≤ 5 m, Radio interference level, maximum motor cable length
C2 ≤ 10 m, Radio interference level, maximum motor cable length C3 ≤ 25 m, Radio interference level, maximum motor cable length |
| Output voltage (U2) |
240 V AC, 3-phase
230 V AC, 3-phase |
| Delay time |
< 10 ms, On-delay
< 10 ms, Off-delay |
| Number of inputs (analog) |
1 (parameterizable, 0 - 10 V DC, 0/4 - 20 mA)
|
| Number of inputs (digital) |
4 (parameterizable, 10 - 30 V DC)
|
| Radio interference class |
C1: for conducted emissions only
C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary. Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments |
| Number of outputs (digital) |
0
|
| Starting current - max |
200 %, IH, max. starting current (High Overload), For 1.875 seconds every 600 seconds, Power section
|
| Number of phases (input) |
1
|
| Number of relay outputs |
1 (parameterizable, N/O, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
|
| Number of phases (output) |
3
|
| Power consumption |
32 W
|
| Rated control supply voltage |
10 V DC (Us, max. 0.2 mA)
|
| Supply frequency |
50/60 Hz
|
| Leakage current at ground IPE - max |
< 10 mA (DC-operated)
< 3.5 mA (AC-operated) |
| Mains voltage - min |
200 V
|
| Nominal output current I2N |
4.3 A
|
| Number of HW-interfaces (industrial ethernet) |
0
|
| Number of HW-interfaces (other) |
0
|
| Number of HW-interfaces (parallel) |
0
|
| Number of HW-interfaces (RS-232) |
0
|
| Number of HW-interfaces (RS-422) |
0
|
| Number of HW-interfaces (RS-485) |
1
|
| Number of HW-interfaces (serial TTY) |
0
|
| Number of HW-interfaces (USB) |
0
|
| Number of interfaces (PROFINET) |
0
|
| Number of outputs (analog) |
0
|
| Output at linear load at rated output voltage - max |
0.75 kW
|
| Output at quadratic load at rated output voltage - max |
0.75 kW
|
| Output frequency - max |
300 Hz
|
| Output frequency - min |
0 Hz
|
| Short-circuit protection (external output circuits) |
Type 1 coordination via the power bus' feeder unit, Main circuit
|
| Shock resistance |
15 g, Mechanical, According to IEC/EN 60068-2-27, 11 ms
|
| Suitable for |
Branch circuits, (UL/CSA)
|
| Switching frequency |
16 kHz, 4 - 32 kHz adjustable (audible), fPWM, Power section, Main circuit
|
| Rated operational current (Ie) |
4.3 A at 150% overload (at an operating frequency of 16 kHz and an ambient air temperature of +50 °C)
|
| Rated operational voltage |
230 V AC, 1-phase
240 V AC, 1-phase |
| Short-circuit protection rating |
15 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
|
| Vibration |
Resistance: According to EN 61800-5-1
|
| Heat dissipation at current/speed |
10.3 W at 25% current and 0% speed
10.3 W at 25% current and 50% speed 10.9 W at 50% current and 0% speed 12.3 W at 50% current and 50% speed 15.3 W at 50% current and 90% speed 28.9 W at 100% current and 50% speed 30.9 W at 100% current and 90% speed 31.8 W at 100% current and 0% speed |
Send email
Product specifications
