Download document () of 20
Send email
Download
You have exceeded the download limit
The CF2000 fire panel is an entry level addressable control panel that can be configured for either 1 or 2 loop operation. It serves as the optimum solution for buildings that require a simple to use addressable fire system with a single, non-networked panel.
Its ability to support Eaton’s cause and effect programming and a wide range of user-controllable functions make the panel suitable for a varied range of projects from small warehouses to small/medium office developments as well as many small industrial applications.
As with all Eaton addressable panels, the CF2000 uses "spur tolerant" soft addressing to minimise installation time and remove potential for errors often associated with many forms of manual addressing. The fire panel also has an LCD display which provides a simple yet comprehensive, menu-driven, end-user interface.
Your search "" did not match any documents or products.
| CF2000 Loop Control Panel | 910187FULL-0198 |
| Fire Alarm Systems Log Book | MFALOG |
| Standards: | EN54 Pt2 1997, A1:2006 EN54-4 1997, A1: 2002 & A2: 2006 |
| Number of Loops: | 2 |
| Addresses per Loop: | 200 |
| Panel sounder circuits: | 4 outputs 1A total (programmed in pairs - outputs 1&2, 3&4) |
| Class change facility: | Operated by external, normally open, volt free contacts |
| Auxiliary relay: | One set of change over contacts, operated in the event of fire activation |
| Auxiliary fire routing equipment output: | Monitored 24Vdc, 30 mA (max) |
| Auxiliary fire protection equipment output: | Monitored 24Vdc, 30 mA (max) |
| Auxiliary Fault routing equipment output: | Monitored 12Vdc, 30 mA (max) |
| Output ports: | RS485 and RS232 (for connection of repeaters etc) |
| Mains input voltage: | 230Vac +10% / -15% |
| System operating voltage: | 24Vdc |
| Batteries: | 2 x 12V 7Ah |
| Standby Duration: | 24 hours (dependant on loop loading) |
| Operating Temperature: | -5˚C to 40˚C |
| Humidity (Non-condensing): | 0 to 93% (+2/-3%) RH |
| Construction: | Back Box – Mild Steel Door – PC / ABS |
| Colour: | Graphite |
| Dimensions (HxWxD): | 400mm x 320mm x 170mm |
| Weight (with batteries): | 15kg |
| Ingress Protection: | IP30 |
| Cable Entry: | Top: 20 cable entry knockouts (20mm) Bottom: 4 cable entry knockouts Rear: 3 cable entry knockouts & cut-out (125mm x 18mm) |
