bdeDownloadDocument () bdeof 20
bdeSendEmail
Descarregar
Excedeu o limite de descarregamentos
Eaton DA1 Variable frequency drive, 500 V AC, 3-phase, 6.5 A, 4 kW, IP66/NEMA 4X, OLED display
| Product Name |
Eaton DA1 Variable frequency drive
|
| Catalog Number |
176987
|
| EAN |
4015081714308
|
| Product Length/Depth |
239.3 mm
|
| Product Height |
257 mm
|
| Product Width |
188 mm
|
| Product Weight |
1.8 kg
|
| Certifications |
UkrSEPRO
CUL UL EAC UL File No.: E172143 IEC/EN 61800-3 Specification for general requirements: IEC/EN 61800-2 Certified by UL for use in Canada RoHS, ISO 9001 CE CSA-C22.2 No. 14 IEC/EN61800-3 UL 508C UL report applies to both US and Canada RCM Safety: EN 61800-5-1: 2003 UL Category Control No.: NMMS, NMMS7 IEC/EN61800-5 |
| Catalog Notes |
The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request.
|
| Model Code |
DA1-356D5NB-B66C
|
| Product Category |
Variable frequency drives
|
| Features |
Parameterization: drivesConnect
Parameterization: drivesConnect mobile (App) Parameterization: Fieldbus Parameterization: Keypad |
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| Fitted with: |
Internal DC link
Additional PCB protection Brake chopper PC connection IGBT inverter Control unit OLED display Breaking resistance |
| Climatic proofing |
< 95 average relative humidity (RH), no condensation, no corrosion
|
| Connection to SmartWire-DT |
No
|
| Operating mode |
Sensorless vector control (SLV)
Speed control with slip compensation U/f control Optional: Vector control with feedback (CLV) |
| Frame size |
FS2
|
| Altitude |
Above 1000 m with 1 % derating per 100 m
Max. 4000 m Max. 1000 m |
| Environmental class |
3C2, 3S2 (Air quality)
|
| Application in domestic and commercial area permitted |
Yes
|
| Mains switch-on frequency |
Maximum of one time every 30 seconds
|
| Application in industrial area permitted |
Yes
|
| Ambient operating temperature - max |
40 °C
|
| Ambient operating temperature - min |
-10 °C
|
| Ambient operating temperature at 150% overload - max |
40 °C
|
| Ambient operating temperature at 150% overload - min |
-10 °C
|
| Ambient storage temperature - max |
60 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Apparent power at 600 V |
6.75 kVA
|
| Mounting position |
Vertical
|
| Relative symmetric net frequency tolerance |
10 %
|
| Relative symmetric net voltage tolerance |
10 %
|
| Protection |
Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
|
| Heat dissipation details |
Operation (with 150 % overload)
|
| Rated operational power at 525 V, 50 Hz, 3-phase |
4 kW
|
| Resolution |
0.1 Hz (Frequency resolution, setpoint value)
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| Switch-on threshold for the braking transistor |
975 VDC
|
| Voltage rating - max |
600 VAC
|
| Communication interface |
DeviceNet, optional
OP-Bus (RS485), built in Modbus-TCP, optional Modbus RTU, built in Ethernet IP, optional CANopen®, built in PROFIBUS, optional EtherCAT, optional PROFINET, optional |
| Converter type |
U converter
|
| Degree of protection |
IP66
NEMA 4X |
| Protocol |
CAN
Other bus systems PROFIBUS PROFINET IO DeviceNet MODBUS EtherNet/IP TCP/IP |
| Assigned motor current IM at 500 V, 50 Hz, 150% overload |
6.5 A
|
| Assigned motor current IM at 525 V, 50 Hz, 150% overload |
6.5 A
|
| Assigned motor current IM at 550 - 600 V, 60 Hz, 150% overload |
6.1 A
|
| System configuration type |
AC supply systems with earthed center point
|
| Assigned motor power at 575/600 V, 60 Hz, 3-phase |
5 HP
|
| Braking resistance |
150 Ω
|
| Equipment heat dissipation, current-dependent Pvid |
120 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Input current ILN at 150% overload |
8.6 A
|
| Braking torque |
Max. 100 % of rated operational current Ie with external braking resistor - Main circuit
Max. 30 % MN, Standard - Main circuit Max. 100 % of rated operational current Ie, variable, DC - Main circuit |
| Cable length |
200 m, screened, with motor choke, maximum permissible, Motor feeder
150 m, unscreened, maximum permissible, Motor feeder 100 m, screened, maximum permissible, Motor feeder 300 m, unscreened, with motor choke, maximum permissible, Motor feeder |
| Functions |
4-quadrant operation possible
|
| Output voltage (U2) |
600 V AC, 3-phase
500 V AC, 3-phase |
| Number of inputs (analog) |
2
|
| Number of inputs (digital) |
5
|
| Number of outputs (digital) |
2
|
| Starting current - max |
200 %, IH, max. starting current (High Overload), for 4 seconds every 40 seconds, Power section
|
| Number of phases (input) |
3
|
| Number of relay outputs |
2 (parameterizable, 1 N/O and 1 changeover contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
|
| Number of phases (output) |
3
|
| Power consumption |
120W
|
| Rated control supply voltage |
10 V DC (Us, max. 10 mA)
|
| Efficiency |
97 % (η)
|
| Rated control voltage (Uc) |
24 V DC (external, max. 100 mA)
|
| Supply frequency |
50/60 Hz
|
| Leakage current at ground IPE - max |
6.5 mA
|
| Mains voltage - max |
600 V
|
| Mains voltage - min |
500 V
|
| Nominal output current I2N |
6.5 A
|
| Number of HW-interfaces (industrial ethernet) |
0
|
| Number of HW-interfaces (other) |
0
|
| Number of HW-interfaces (parallel) |
0
|
| Number of HW-interfaces (RS-232) |
0
|
| Number of HW-interfaces (RS-422) |
0
|
| Number of HW-interfaces (RS-485) |
1
|
| Number of HW-interfaces (serial TTY) |
0
|
| Number of HW-interfaces (USB) |
0
|
| Number of interfaces (PROFINET) |
0
|
| Number of outputs (analog) |
2
|
| Output at linear load at rated output voltage - max |
4 kW
|
| Output at quadratic load at rated output voltage - max |
4 kW
|
| Output frequency - max |
500 Hz
|
| Output frequency - min |
0 Hz
|
| Output voltage - max |
600 V
|
| Overload current IL at 150% overload |
9.75 A
|
| Suitable for |
Branch circuits, (UL/CSA)
|
| Switching frequency |
8 kHz, 4 - 24 kHz adjustable (audible), fPWM, Power section, Main circuit
|
| Rated operational voltage |
500 V AC, 3-phase
600 V AC, 3-phase |
| Short-circuit protection rating |
15 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
|
| Rated frequency - max |
62 Hz
|
| Rated frequency - min |
48 Hz
|
| Rated operational current (Ie) at 150% overload |
6.5 A
|
| Rated operational current for specified heat dissipation (In) |
6.5 A
|
| Rated operational power at 500 V, 50 Hz, 3-phase |
4 kW
|
| Safety function/level |
STO (Safe Torque Off, SIL2, PLc Cat 2)
|
| Short-circuit protection |
LPJ fuse used together with J60060-3 fuse base, Power wiring, Assigned switching and protective elements
NH fuse used together with TB00-D fuse base, Power wiring, Assigned switching and protective elements |
| Heat dissipation at current/speed |
102 W at 100% current and 50% speed
114 W at 100% current and 90% speed 71 W at 25% current and 0% speed 71 W at 25% current and 50% speed 82 W at 50% current and 0% speed 82 W at 50% current and 50% speed 84 W at 50% current and 90% speed 93 W at 100% current and 0% speed |
Especificações do produto
