Descărcați documentul () din 20
Ștergere selecție
Descărcați selecția
Romania Selectați locația dumneavoastră
Submit form in new Tab
Noi facem să funcționeze  lucrurile importante*
Submit form in new Tab
Produse
Servicii
Piețe
Asistență
Compania
MyEaton

Favorite

Gestionați favoritele.

104604
Codul modelului: NZM1-XFI300R

Eaton Moeller series NZM Earth-fault release, 300mA, 3p, right

Specificaţii produs
Adăugați o mostră gratuită în coș
Contact vânzări

General specifications

Product Name
Eaton Moeller series NZM Earth leakage relay
Catalog Number
104604
EAN
4015081044146
Product Length/Depth
220 mm
Product Height
80 mm
Product Width
105 mm
Product Weight
1.6 kg
Compliances
IEC
RoHS conform
Certifications
IEC/EN 60947-2
IEC/EN 60947-2 annex B
Model Code
NZM1-XFI300R

Delivery program

Application
In three-phase systems
Type
Earth-fault releases
Number of poles
Three-pole
Special features
  • Earth-fault release to IEC/EN 60947-2
  • Not UL/CSA approved
  • Suitable for use in three-phase systems
  • Pulse-current sensitive type A according to core-balance principle
  • For 3 pole NZM1 circuit-breakers and N1 switch-disconnectors
  • Supply voltage-dependent Ue = 200 – 415 V 50/60 Hz
  • Control knobs, sealable.
  • Fitted on the right side up to In = 160 A at ICu = 50 kA
Frame
45 mm
NZM1
Used with
N(S)1
Three-pole
NZM1

Technical Data - Electrical

Sensitivity type
Pulse-current sensitive as per core-balance principle (type A)
Voltage rating
200 - 415 V AC, min. 80 V AC for detection of fault currents type A/AC (dependent on mains voltage)
Rated operating voltage (Ue) - max
415 V
Rated control supply voltage (Us) at AC, 50 Hz - min
200 V
Rated control supply voltage (Us) at AC, 50 Hz - max
415 V
Rated control supply voltage (Us) at AC, 60 Hz - min
200 V
Rated control supply voltage (Us) at AC, 60 Hz - max
415 V
Rated control supply voltage (Us) at DC - min
0 V
Current rating - min
15 A
Current rating - max
160 A
Rated fault current - min
0.3 A
Rated fault current - max
0.3 A
Fault current detection range
50/60 Hz
Frequency rating
50 Hz / 60 Hz
Power on-delay time - min
300 ms
Power on-delay time - max
300 ms

Technical Data - Mechanical

Mounting Method
On the right side
Mounting Method
On the right side
Mounting position
Vertical and 90° in all directions
Degree of protection
IP20 (operating component area)
Shock resistance
20 g (half-sinusoidal shock 20 ms)
Special features
  • Earth-fault release to IEC/EN 60947-2
  • Not UL/CSA approved
  • Suitable for use in three-phase systems
  • Pulse-current sensitive type A according to core-balance principle
  • For 3 pole NZM1 circuit-breakers and N1 switch-disconnectors
  • Supply voltage-dependent Ue = 200 – 415 V 50/60 Hz
  • Control knobs, sealable.
  • Fitted on the right side up to In = 160 A at ICu = 50 kA
Lifespan, mechanical
20000 operations

Technical Data - Mechanical - Terminals

Terminal capacity (solid/flexible conductor)
As NZM1 standard terminal without ferrules
As NZM1 standard terminal with ferrules

Design verification as per IEC/EN 61439 - technical data

Ambient operating temperature - min
-5 °C
Ambient operating temperature - max
40 °C

Design verification as per IEC/EN 61439

10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Exportați specificațiile produsului

Desene

Instrucțiuni de instalare

Notă: Dacă fișierul(e) lipsesc din descărcarea .zip, atunci tipul de fișier nu este suportat pentru descărcarea în masă.
Eaton este o companie de gestionare inteligentă a energiei electrice, dedicată îmbunătățirii calității vieții și protejării mediului pentru oamenii de pretutindeni. Suntem ghidați de angajamentul nostru de a face afaceri corect, de a opera în mod durabil și de a ne ajuta clienții să gestioneze energia ─ astăzi și în viitor. Prin valorificarea tendințelor globale de creștere a electrificării și digitalizării, accelerăm tranziția planetei către energia regenerabilă, ajutând la rezolvarea celor mai urgente provocări de gestionare a energiei din lume.
Companie
Linkuri rapide
© 2026 Eaton. Toate drepturile rezervate