Eaton Moeller® series M22 Joystick, with 2 operating points per operating direction, With plastic shaft, 2 positions, Bezel: titanium, momentary, Vertical
| Product Name |
Eaton Moeller® series M22 Joystick
|
| Catalog Number |
111507
|
| EAN |
4015081110674
|
| Product Length/Depth |
100 mm
|
| Product Height |
30 mm
|
| Product Width |
30 mm
|
| Product Weight |
0.028 kg
|
| Certifications |
IEC/EN 60947
VDE 0660 |
| Catalog Notes |
These joysticks are combined with normal normally open contacts M22-K10 and NO early-make contacts M22-K10P.
|
| Model Code |
M22-WJ2V-2P
|
| Bezel color |
Titanium
|
| Bezel material |
Plastic
|
| Fitted with: |
Plastic shaft
2 operating points per operating direction Front ring Retraction in 0-position |
| Degree of protection |
IP66
NEMA 4X, 13 |
| Lifespan, mechanical |
100,000 Operations
|
| Opening diameter |
22.5 mm
|
| Operating frequency |
2000 Operations/h
|
| Type |
Joystick
|
| Type |
Joystick
|
| Mounting position |
As required
|
| Shock resistance |
30 g, Mechanical, According to IEC/EN 60068-2-27, Sinusoidal shock 11 ms
Mechanical, According to IEC/EN 60068-2-27 |
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
70 °C
|
| Climatic proofing |
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30 |
| Rated operational current (Ie) at AC-21, 400 V, 415 V |
0 A
|
| Connection to SmartWire-DT |
No
|
| Actuating force |
5 N
|
| Actuator function |
Momentary
Vertical |
| Number of actuation directions |
2
|
| Force for positive opening - min |
0 N
|
| Number of contacts (normally closed) per actuation direction |
0
|
| Heat dissipation capacity Pdiss |
0 W
|
| Rated operational current for specified heat dissipation (In) |
0 A
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Please enquire
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
Not applicable.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Siųsti el. laišką
Gaminio specifikacijos
