271990 | Eaton Moeller® series DILM Contactor

Vispārējā informācija

Product Name	Eaton Moeller® series DILM Contactor
Catalog Number	271990
EAN	4015082719906
Product Length/Depth	232 mm
Product Height	296 mm
Product Width	250 mm
Product Weight	17.338 kg
Certifications	UL File No.: E29096 UL UL Category Control No.: NLDX IEC/EN 60947-4-1 CE VDE 0660 CSA File No.: 012528 IEC/EN 60947 CSA-C22.2 No. 60947-4-1-14 UL 60947-4-1 CSA CSA Class No.: 3211-04
Catalog Notes	Contacts according to EN 50012 Conventional thermal current Ith of main contacts (1-pole, open) at 60°
Model Code	DILM1000/22(RAC500)

Vispārīgi

Accessories	Fitting options auxiliary contacts: on the side: 2 x DILM820-XHI11(V)-SI; 2 x DILM820-XHI11-SA
Application	Contactors for Motors
Connection	Screw terminals
Degree of protection	IP00
Electromagnetic compatibility	Designed for operation in industrial environments. Its use in residential environments may cause radio-frequency interference, requiring additional noise suppression.
Fitted with:	Suppressor circuit in actuating electronics
Lifespan, electrical	100,000 Operations (at Condensor operation)
Lifespan, mechanical	5,000,000 Operations (AC operated) 5,000,000 Operations (DC operated)
Operating frequency	1000 mechanical Operations/h (AC operated) 200 Operations/h 1000 mechanical Operations/h (DC operated)
Overvoltage category	III
Pollution degree	3
Product category	Contactors
Protection	Finger and back-of-hand proof with terminal shroud or terminal block, Protection against direct contact when actuated from front (EN 50274)
Rated impulse withstand voltage (Uimp)	8000 V AC
Resistance	500 mΩ (Admissible transitional contact resistance - of the external control circuit device when actuating A11)
Shock resistance	10 g, N/O auxiliary contact, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms 8 g, N/C auxiliary contact, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms 10 g, N/O main contact, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms
Signal level	5 V - 15 V, PLC signal level (A3 - A4) to IEC/EN 61131-2 (type 2), Magnet systems
Utilization category	AC-3: Normal AC induction motors: starting, switch off during running AC-4: Normal AC induction motors: starting, plugging, reversing, inching AC-1: Non-inductive or slightly inductive loads, resistance furnaces
Voltage type	AC/DC

Klimatiskie vides apstākļi

Altitude	Max. 2000 m
Ambient operating temperature - min	-40 °C
Ambient operating temperature - max	60 °C
Ambient operating temperature (enclosed) - min	7777777 °C
Ambient operating temperature (enclosed) - max	7777777 °C
Ambient storage temperature - min	-40 °C
Ambient storage temperature - max	80 °C
Climatic proofing	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30

Spailes ietilpība

Terminal capacity (busbar)	60 mm width, Main connection
Terminal capacity (flexible with cable lug)	50 - 240 mm²
Terminal capacity (flexible with ferrule)	2 x (0.75 - 2.5) mm², Control circuit cables 1 x (0.75 - 2.5) mm², Control circuit cables
Terminal capacity (solid)	1 x (0.75 - 2.5) mm², Control circuit cables 2 x (0.75 - 2.5) mm², Control circuit cables
Terminal capacity (solid/stranded AWG)	2/0 - 500 MCM, Main cables 18 - 14, Control circuit cables
Terminal capacity (stranded with cable lug)	70 - 240 mm²
Width across flats	18 mm
Screw size	M12, Terminal screw, Main connections M3.5, Terminal screw, Control circuit cables
Screwdriver size	2, Terminal screw, Control circuit cables, Pozidriv screwdriver
Tightening torque	1.2 Nm, Screw terminals, Control circuit cables 35 Nm, Main cable connection screw/bolt

Elektriskie parametri

Inrush current	Max. 30 x Ie (peak)
Rated breaking capacity at 220/230 V	8200 A
Rated breaking capacity at 380/400 V	8200 A
Rated breaking capacity at 500 V	8200 A
Rated breaking capacity at 660/690 V	8200 A
Rated breaking capacity at 1000 V	5800 A
Rated insulation voltage (Ui)	1000 V
Rated making capacity (cos phi to IEC/EN 60947)	9840 A
Rated operational current (Ie)	463 A at up to 525 V (Individual compensation, three-phase capacitors, open) 265 A at 690 V (Individual compensation, three-phase capacitors, open)
Rated operational current (Ie) at AC-3, 220 V, 230 V, 240 V	1000 A
Rated operational current (Ie) at AC-3, 380 V, 400 V, 415 V	1000 A
Rated operational current (Ie) at AC-3, 440 V	1000 A
Rated operational current (Ie) at AC-3, 500 V	1000 A
Rated operational current (Ie) at AC-3, 660 V, 690 V	1000 A
Rated operational current (Ie) at AC-3, 1000 V	750 A
Rated operational current (Ie) at AC-4, 220 V, 230 V, 240 V	800 A
Rated operational current (Ie) at AC-4, 440 V	800 A
Rated operational current (Ie) at AC-4, 500 V	800 A
Rated operational current (Ie) at AC-4, 660 V, 690 V	800 A
Rated operational current (Ie) at AC-4, 1000 V	700 A
Rated operational power at AC-3, 240 V, 50 Hz	340 kW
Rated operational power at AC-3, 380/400 V, 50 Hz	560 kW
Rated operational power at AC-3, 415 V, 50 Hz	610 kW
Rated operational power at AC-3, 440 V, 50 Hz	650 kW
Rated operational power at AC-3, 500 V, 50 Hz	730 kW
Rated operational power at AC-3, 690 V, 50 Hz	1000 kW
Rated operational power at AC-3, 1000 V, 50 Hz	1100 kW
Rated operational power at AC-4, 220/230 V, 50 Hz	260 kW
Rated operational power at AC-4, 240 V, 50 Hz	280 kW
Rated operational power at AC-4, 415 V, 50 Hz	490 kW
Rated operational power at AC-4, 440 V, 50 Hz	520 kW
Rated operational power at AC-4, 500 V, 50 Hz	590 kW
Rated operational power at AC-4, 660/690 V, 50 Hz	780 kW
Rated operational voltage (Ue) at AC - max	1000 V
Rated operational power at AC-4, 1000 V, 50 Hz	1000 kW
Safe isolation	1000 V AC, Between coil and contacts, According to EN 61140
Special purpose rating of definite purpose rating	6000 A, LRA 480 V 60 Hz 3-ph, 100,000 cycles acc. to UL 1995, (UL/CSA) 6000 A, LRA 600 V 60 Hz 3-ph, 100,000 cycles acc. to UL 1995, (UL/CSA) 1200 A, FLA 480 V 60 Hz 3-ph, 100,000 cycles acc. to UL 1995, (UL/CSA) 1200 A, FLA 600 V 60 Hz 3-ph, 100,000 cycles acc. to UL 1995, (UL/CSA)

Īsslēguma parametri

Short-circuit current rating (basic rating)	85 kA, SCCR (UL/CSA) 1200 A, max. CB, SCCR (UL/CSA) 2000 A, max. Fuse, SCCR (UL/CSA)
Short-circuit current rating (high fault at 480 V)	85 kA, Fuse, SCCR (UL/CSA) 2000 A, max. Fuse, SCCR (UL/CSA) 1200 A, max. CB, SCCR (UL/CSA) 85 kA, CB, SCCR (UL/CSA)
Short-circuit current rating (high fault at 600 V)	1200 A, max. CB, SCCR (UL/CSA) 85 kA, CB, SCCR (UL/CSA) 85 kA, Fuse, SCCR (UL/CSA) 2000 A, max. Fuse, SCCR (UL/CSA)
Short-circuit protection rating (type 1 coordination) at 1000 V	800 A gG/gL
Short-circuit protection rating (type 1 coordination) at 400 V	1200 A gG/gL
Short-circuit protection rating (type 1 coordination) at 690 V	1200 A gG/gL
Short-circuit protection rating (type 2 coordination) at 1000 V	630 A gG/gL
Short-circuit protection rating (type 2 coordination) at 400 V	630 A gG/gL
Short-circuit protection rating (type 2 coordination) at 690 V	630 A gG/gL

AC-1/Standarta termiskās izturības strāva Ith

Conventional thermal current Ith at 40°C (3-pole, open)	1225 A
Conventional thermal current Ith at 50°C (3-pole, open)	1095 A
Conventional thermal current Ith at 55°C (3-pole, open)	1044 A
Conventional thermal current Ith of main contacts (1-pole, open)	2500 A

Komutācijas spēja

Switching capacity (main contacts, general use)	1225 A, Maximum motor rating (UL/CSA)
Switching capacity (auxiliary contacts, general use)	15 A, 600 V AC, (UL/CSA) 1 A, 250 V DC, (UL/CSA)
Switching capacity (auxiliary contacts, pilot duty)	P300, DC operated (UL/CSA) A600, AC operated (UL/CSA)

Magnētiskā sistēma

Behavior in marginal and transitional conditions	Sealing - Excess voltage (1.15 - 1.3 x Uc max): Contactor remains switched on Sealing - Voltage interruptions (0 - 0.2 x Uc min ≤ 10 ms: Time is bridged successfully Sealing - Pick-up phase (0 - 0.7 x Uc min: Contactor does not switch on Sealing - Pick-up phase (0.7 x Uc min - 1.15 x Uc max): Contactor switches on with certainty Sealing - Voltage drops (0.2 - 0.6 x Uc min ≤12 ms: Time is bridged successfully Sealing - Voltage drops (0.6 - 0.7 x Uc min: Contactor remains switched on Sealing - Voltage interruptions 0 - 0.2 x Uc min) > 10 ms: Drop-out of the contactor Sealing - Voltage drops (0.2 - 0.6 x Uc min) > 12 ms: Drop-out of the contactor
Drop-out voltage	0.2 x US max - 0.6 x US min, DC operated AC operated: 0.2 x US max - 0.6 x US min, AC operated
Duty factor	100 %
Pick-up voltage	0.7 - 1.15 V AC x Us 0.7 - 1.15 V DC x Us
Power consumption	Control transformer with uk ≤ 7%
Power consumption, pick-up, 50 Hz	700 W, Pull-in power, Coil in a cold state and 1.0 x Us 800 VA, Pull-in power, Coil in a cold state and 1.0 x Us
Power consumption, pick-up, 60 Hz	700 W, Pull-in power, Coil in a cold state and 1.0 x Us 800 VA, Pull-in power, Coil in a cold state and 1.0 x Us
Power consumption, sealing, 50 Hz	28.8 VA, Coil in a cold state and 1.0 x Us 12.4 W, Coil in a cold state and 1.0 x Us
Power consumption, sealing, 60 Hz	12.4 W, Coil in a cold state and 1.0 x Us 28.8 VA, Coil in a cold state and 1.0 x Us
Rated control supply voltage (Us) at AC, 50 Hz - min	480 V
Rated control supply voltage (Us) at AC, 50 Hz - max	500 V
Rated control supply voltage (Us) at AC, 60 Hz - min	480 V
Rated control supply voltage (Us) at AC, 60 Hz - max	500 V
Rated control supply voltage (Us) at DC - min	250 V
Rated control supply voltage (Us) at DC - max	700 V
Switching time (AC operated, make contacts, closing delay) - max	70 ms
Switching time (AC operated, make contacts, opening delay) - max	110 ms

Motora jauda

Assigned motor power at 230/240 V, 60 Hz, 3-phase	400 HP
Assigned motor power at 460/480 V, 60 Hz, 3-phase	800 HP
Assigned motor power at 575/600 V, 60 Hz, 3-phase	1000 HP

Kontakti

Number of auxiliary contacts (normally closed contacts)	2
Number of auxiliary contacts (normally open contacts)	2
Number of contacts (normally closed contacts)	2
Number of contacts (normally open contacts)	2

Konstrukcijas pārbaude

Equipment heat dissipation, current-dependent Pvid	0 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	32 W
Rated operational current for specified heat dissipation (In)	1000 A
Static heat dissipation, non-current-dependent Pvs	6.5 W
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

271990
Modeļa kods: DILM1000/22(RAC500)

Vispārējā informācija

Vispārīgi

Klimatiskie vides apstākļi

Spailes ietilpība

Elektriskie parametri

Īsslēguma parametri

AC-1/Standarta termiskās izturības strāva Ith

Komutācijas spēja

Magnētiskā sistēma

Motora jauda

Kontakti

Konstrukcijas pārbaude

Eksportēt produkta specifikāciju

Characteristic curve

eCAD model

Elektroinstalāciju diagrammas

mCAD model

Sertifikāti

Uzstādīšanas instrukcijas

Zīmējumi

Designed to work together

271990 Modeļa kods: DILM1000/22(RAC500)

Vispārējā informācija

Vispārīgi

Klimatiskie vides apstākļi

Spailes ietilpība

Elektriskie parametri

Īsslēguma parametri

AC-1/Standarta termiskās izturības strāva Ith

Komutācijas spēja

Magnētiskā sistēma

Motora jauda

Kontakti

Konstrukcijas pārbaude

Eksportēt produkta specifikāciju

Characteristic curve

eCAD model

Elektroinstalāciju diagrammas

mCAD model

Sertifikāti

Uzstādīšanas instrukcijas

Zīmējumi

Designed to work together

Parunāsim par aizraujošām idejām

271990
Modeļa kods: DILM1000/22(RAC500)