Eaton Moeller series NZM - Molded Case Circuit Breaker. Shunt release for NZM2/3, 1 early-make auxiliary contact, 2NO, 48AC/DC, Push-in terminals
| Product Name |
Eaton Moeller series NZM - Molded case circuit breaker
|
| Catalog Number |
189812
|
| EAN |
4015081878079
|
| Product Length/Depth |
115 mm
|
| Product Height |
65 mm
|
| Product Width |
75 mm
|
| Product Weight |
0.08 kg
|
| Compliances |
UL/CSA
IEC RoHS conform |
| Model Code |
NZM2/3-XAHIV48AC/DC-PI
|
| Type |
|
| Special features |
|
| Frame |
NZM2/3
|
| Fitted with: |
Early-make auxiliary contact
|
| Suitable for |
Motor safety switch
Off-load switch |
| Used with |
NZM2(-4), N(S)2(-4)
NZM3(-4), N(S)3(-4) |
| Voltage type |
AC/DC
|
| Rated control supply voltage |
48 V AC/DC
|
| Rated control supply voltage (Us) at AC, 50 Hz - min |
48 V
|
| Rated control supply voltage (Us) at AC, 50 Hz - max |
48 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - min |
48 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - max |
48 V
|
| Rated control supply voltage (Us) at DC - min |
48 V
|
| Rated control supply voltage (Us) at DC - max |
48 V
|
| Electric connection type |
Spring clamp connection
|
| Number of contacts (change-over contacts) |
0
|
| Number of contacts (normally closed contacts) |
0
|
| Number of contacts (normally open contacts) |
1
|
| Connection type |
With push in terminal
|
| Special features |
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Wyślij wiadomości e-mail
MyEatonFAQs
Specyfikacje produktu
