Download document () of 20
Send email
Download
You have exceeded the download limit
SC9000 EP variable frequency drive (VFD) Frame F is designed for use with 4160 V induction or synchronous motors from 6500 horsepower (Hp) up to 12000 Hp. Built on the SC9000 EP platform, the Frame F includes silicone encapsulated powerpole to yields a high reliability, even in severe environments such as wastewater, mining and oil & gas. Additionally, the Frame F drive uses proven SC9000 EP components including rectifiers, inverters and dV/dT filters connected in parallel to achieve ratings up to 12000 Hp.
| HORSEPOWER | 6500 Hp - 12000 Hp |
| POWER SEMICONDUCTORS | IGBTs, diodes |
| LINE-SIDE CONVERTER | 24-pulse diode rectifier |
| INVERTER | Encapsulated IGBT power modules |
| CONTROL | Sensorless closed-loop, fully digital signal processor |
| POWER SECTION ISOLATION | Fiber-optic cable |
| EFFICIENCY | >97% |
| SERVICE DUTY | Standard 110% for 1 minute every 10 minutes. Optional 150% for 1 minute every 10 minutes |
| INPUT FREQUENCY | 60 Hz ±5% |
| OUTPUT FREQUENCY | 0–120 Hz |
| OUTPUT VOLTAGE | 4160 V |
| SPEED REGULATION | 0.1% without tach feedback, 0.02% with tach feedback |
| POWER LOSS RIDE-THROUGH | 5 cycles |
| AMBIENT TEMPERATURE | 0 to 40 °C |
| ALTITUDE | 0 to 3300 ft |
| WATTS LOSS | 23 watts/hp with transformer, 9 watts/hp with remote transformer |
