169093 | Eaton DA1 Variable frequency drive

General specifications

Product Name	Eaton DA1 Variable frequency drive
Catalog Number	169093
EAN	4015081655786
Product Length/Depth	186 mm
Product Height	231 mm
Product Width	107 mm
Product Weight	1.8 kg
Certifications	UL File No.: E172143 UL report applies to both US and Canada EAC IEC/EN61800-3 IEC/EN61800-5 RoHS, ISO 9001 UL 508C Safety: EN 61800-5-1: 2003 Certified by UL for use in Canada CUL CE IEC/EN 61800-3 UL Category Control No.: NMMS, NMMS7 Specification for general requirements: IEC/EN 61800-2 UkrSEPRO CSA-C22.2 No. 14 RCM UL
Catalog Notes	The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request.
Model Code	DA1-32011FB-A20C

Algemeen

Cable length	150 m, unscreened, maximum permissible, Motor feeder 300 m, unscreened, with motor choke, maximum permissible, Motor feeder C2 ≤ 5 m, Radio interference level, maximum motor cable length C3 ≤ 25 m, Radio interference level, maximum motor cable length 100 m, screened, maximum permissible, Motor feeder 200 m, screened, with motor choke, maximum permissible, Motor feeder
Communication interface	SmartWire-DT, optional OP-Bus (RS485), built in Modbus-TCP, optional EtherCAT, optional PROFIBUS, optional DeviceNet, optional PROFINET, optional CANopen®, built in Ethernet IP, optional Modbus RTU, built in
Connection to SmartWire-DT	In conjunction with DX-NET-SWD1 SmartWire DT module Yes
Degree of protection	IP20 NEMA Other
Electromagnetic compatibility	1st and 2nd environments (according to EN 61800-3)
Fitted with:	Additional PCB protection PC connection IGBT inverter 7-digital display assembly Radio interference suppression filter Breaking resistance Brake chopper Control unit Internal DC link
Frame size	FS2
Functions	4-quadrant operation possible
Mounting position	Vertical
Product Category	Variable frequency drives
Protection	Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
Protocol	PROFIBUS Other bus systems EtherNet/IP PROFINET IO MODBUS CAN DeviceNet TCP/IP
Safety function/level	STO (Safe Torque Off, SIL2, PLc Cat 2)
Suitable for	Branch circuits, (UL/CSA)
Radio interference class	Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.

Klimatologische milieuomstandigheden

Altitude	Max. 4000 m Max. 1000 m Above 1000 m with 1 % derating per 100 m
Ambient operating temperature - min	-10 °C
Ambient operating temperature - max	50 °C
Ambient operating temperature at 150% overload - min	-10 °C
Ambient operating temperature at 150% overload - max	50 °C
Ambient storage temperature - min	-40 °C
Ambient storage temperature - max	60 °C
Climatic proofing	< 95 average relative humidity (RH), no condensation, no corrosion

Hoofdstroom

Efficiency	95.9 % (η)
Heat dissipation at current/speed	112 W at 100% current and 90% speed 42 W at 50% current and 0% speed 43 W at 25% current and 0% speed 51 W at 25% current and 50% speed 62 W at 50% current and 50% speed 74 W at 100% current and 0% speed 74 W at 50% current and 90% speed 90 W at 100% current and 50% speed
Leakage current at ground IPE - max	1.73 mA
Mains switch-on frequency	Maximum of one time every 30 seconds
Mains voltage - min	200 V
Mains voltage - max	240 V
Operating mode	U/f control Sensorless vector control (SLV) Speed control with slip compensation Optional: Vector control with feedback (CLV)
Output frequency - min	0 Hz
Output frequency - max	500 Hz
Output voltage (U2)	240 V AC, 3-phase 230 V AC, 3-phase
Overload current IL at 150% overload	15.75 A
Rated control supply voltage	10 V DC (Us, max. 10 mA)
Rated frequency - min	48 Hz
Rated frequency - max	62 Hz
Rated operational current (Ie) at 150% overload	10.5 A
Rated operational power at 220/230 V, 50 Hz, 1-phase	2.2 kW
Rated operational voltage	230 V AC, 3-phase 240 V AC, 3-phase
Resolution	0.1 Hz (Frequency resolution, setpoint value)
Short-circuit protection rating	17.5 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
Starting current - max	200 %, IH, max. starting current (High Overload), for 4 seconds every 40 seconds, Power section
Supply frequency	50/60 Hz
Switching frequency	16 kHz, 4 - 32 kHz adjustable (audible), fPWM, Power section, Main circuit
System configuration type	AC supply systems with earthed center point
Voltage rating - max	240 VAC

Nom. vermogen

Assigned motor current IM at 220 - 240 V, 60 Hz, 150% overload	9.6 A
Assigned motor current IM at 230 V, 50 Hz, 150% overload	8.7 A
Assigned motor power at 230/240 V, 60 Hz, 1-phase	3 HP

Schijnbaar vermogen

Apparent power at 230 V	4.18 kVA
Apparent power at 240 V	4.36 kVA

Remfunctie

Braking resistance	35 Ω
Braking torque	Max. 30 % MN, Standard - Main circuit Max. 100 % of rated operational current Ie with external braking resistor - Main circuit Max. 100 % of rated operational current Ie, variable, DC - Main circuit
Switch-on threshold for the braking transistor	390 VDC

Regelcircuit

Number of inputs (analog)	2
Number of inputs (digital)	5
Number of outputs (analog)	2
Number of outputs (digital)	2
Number of relay outputs	2 (parameterizable, 1 N/O and 1 changeover contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
Rated control voltage (Uc)	24 V DC (external, max. 100 mA)

Ontwerpverificatie

Equipment heat dissipation, current-dependent Pvid	90.2 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Rated operational current for specified heat dissipation (In)	10.5 A
Static heat dissipation, non-current-dependent Pvs	0 W
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Ontworpen om samen te werken

Ontdek andere Eaton producten en accessoires die zijn ontwikkeld om dit product te verbeteren.

169093
Model Code: DA1-32011FB-A20C

General specifications

Algemeen

Klimatologische milieuomstandigheden

Hoofdstroom

Nom. vermogen

Schijnbaar vermogen

Remfunctie

Regelcircuit

Ontwerpverificatie

Productspecificatie exporteren

Brochures

Declarations of conformity

eCAD model

Gebruikershandleidingen

Installatiehandleidingen

Installation videos

mCAD model

Tekeningen

Ontworpen om samen te werken

169093 Model Code: DA1-32011FB-A20C

General specifications

Algemeen

Klimatologische milieuomstandigheden

Hoofdstroom

Nom. vermogen

Schijnbaar vermogen

Remfunctie

Regelcircuit

Ontwerpverificatie

Productspecificatie exporteren

Brochures

Declarations of conformity

eCAD model

Gebruikershandleidingen

Installatiehandleidingen

Installation videos

mCAD model

Tekeningen

Ontworpen om samen te werken

Laten we grote ideeën bespreken

169093
Model Code: DA1-32011FB-A20C