MyEaton: Sıkça Sorulan Sorular
Eaton Moeller series NZM - Molded Case Circuit Breaker. Switch-disconnector 4p 400A BG3
| Product Name |
Eaton Moeller series NZM switch-disconnector
|
| Catalog Number |
266023
|
| EAN |
4015082660239
|
| Product Length/Depth |
159 mm
|
| Product Height |
275 mm
|
| Product Width |
185 mm
|
| Product Weight |
6.48 kg
|
| Compliances |
RoHS conform
|
| Certifications |
IEC/EN 60947
IEC |
| Model Code |
N3-4-400
|
| Application |
Use in unearthed supply systems at 690 V
|
| Type |
Switch-disconnector
|
| Circuit breaker frame type |
N3
|
| Number of poles |
Four-pole
|
| Amperage Rating |
400 A
|
| Features |
Motor drive optional
Version as maintenance-/service switch Version as emergency stop installation Version as main switch |
| Special features |
|
| Voltage rating |
690 V - 690 V
|
| Rated operating voltage (Ue) at AC - max |
690 V
|
| Rated insulation voltage (Ui) |
1000 V
|
| Rated impulse withstand voltage (Uimp) at auxiliary contacts |
6000 V
|
| Rated impulse withstand voltage (Uimp) at main contacts |
8000 V
|
| Rated operational current |
630 A (415 V AC-22/23A, making and breaking capacity)
630 A (690 V AC-22/23A, making and breaking capacity) |
| Rated conditional short-circuit current with back-up fuse |
PN3(N3)-400…630: 630 AgGgL
100 kA at 400/415 V 80 kA at 690 V |
| Rated conditional short-circuit current with downstream fuse |
80 kA at 690 V
PN3(N3)-400…630: 630 AgGgL 100 kA at 400/415 V |
| Rated short-time withstand current (t = 0.3 s) |
12 kA
|
| Rated short-time withstand current (t = 1 s) |
12 kA
|
| Amperage Rating |
400 A
|
| Rated operating frequency |
50 Hz
|
| Rated short-circuit making capacity Icm at 690 V, 50/60 Hz |
25 kA
|
| Rated operating power at AC-23, 400 V |
200 kW
|
| Short-circuit protective device fuses - max |
630 A gL
|
| Electrical connection type of main circuit |
Screw connection
|
| Isolation |
300 V AC (between the auxiliary contacts)
500 V AC (between auxiliary contacts and main contacts) |
| Number of operations per hour - max |
60
|
| Handle type |
Rocker lever
|
| Overvoltage category |
III
|
| Pollution degree |
3
|
| Lifespan, electrical |
2000 operations at 690 V AC-3
3000 operations at 400 V AC-3 5000 operations at 400 V AC-1 3000 operations at 415 V AC-3 3000 operations at 690 V AC-1 5000 operations at 415 V AC-1 |
| Direction of incoming supply |
As required
|
| Mounting Method |
Distribution board installation
Ground mounting Fixed Built-in device fixed built-in technique Intermediate mounting |
| Mounting Method |
Distribution board installation
Ground mounting Fixed Built-in device fixed built-in technique Intermediate mounting |
| Degree of protection |
IP20 (basic protection type, in the area of the HMI devices)
Other |
| Degree of protection (IP), front side |
IP40 (with insulating surround)
IP66 (with door coupling rotary handle) IP20 |
| Degree of protection (terminations) |
IP00 (terminations, phase isolator and band terminal)
IP10 (tunnel terminal) |
| Protection against direct contact |
Finger and back-of-hand proof to DIN EN 50274/VDE 0106 part 110
|
| Shock resistance |
20 g (half-sinusoidal shock 20 ms)
|
| Number of auxiliary contacts (change-over contacts) |
0
|
| Number of auxiliary contacts (normally closed contacts) |
0
|
| Number of auxiliary contacts (normally open contacts) |
0
|
| Number of switches |
1
|
| Handle color |
Black
|
| Switch positions |
I, +, 0
|
| Climatic proofing |
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30 |
| Special features |
|
| Lifespan, mechanical |
15000 operations
|
| Standard terminals |
Screw terminal
|
| Optional terminals |
Box terminal. Connection on rear. Tunnel terminal
|
| Terminal capacity (aluminum solid conductor/cable) |
16 mm² (1x) direct at switch rear-side connection
16 mm² (1x) at tunnel terminal 10 mm² - 16 mm² (2x) direct at switch rear-side connection |
| Terminal capacity (aluminum stranded conductor/cable) |
25 mm² - 185 mm² (1x) at 1-hole tunnel terminal up to 240 mm² depending on the cable manufacturer.
|
| Terminal capacity (copper busbar) |
Max. 10 mm x 50 mm (2x) at rear-side width extension
Min. 20 mm x 5 mm direct at switch rear-side connection M10 at rear-side screw connection |
| Terminal capacity (copper solid conductor/cable) |
16 mm² (2x) at box terminal
16 mm² (2x) direct at switch rear-side connection 16 mm² (1x) direct at switch rear-side connection 300 mm² (2x) at rear-side width extension |
| Terminal capacity (copper stranded conductor/cable) |
25 mm² - 120 mm² (1x) direct at switch rear-side connection
50 mm² - 240 mm² (1x) at 2-hole tunnel terminal 25 mm² - 185 mm² (1x) at 1-hole tunnel terminal 35 mm² - 240 mm² (1x) at box terminal 25 mm² - 120 mm² (2x) direct at switch rear-side connection 50 mm² - 240 mm² (2x) at 2-hole tunnel terminal 25 mm² - 120 mm² (2x) at box terminal |
| Terminal capacity (copper strip) |
Max. 10 segments of 32 mm x 1 mm + 5 segments of 32 mm x 1 mm at rear-side connection (punched)
10 segments of 50 mm x 1 mm (2x) at rear-side width extension Max. 8 segments of 24 mm x 1 mm (2x) at box terminal Min. 6 segments of 16 mm x 0.8 mm at box terminal Max. 10 segments of 24 mm x 1 mm + 5 segments of 24 mm x 1 mm Min. 6 segments of 16 mm x 0.8 mm at rear-side connection (punched) |
| Rated operational current for specified heat dissipation (In) |
400 A
|
| Equipment heat dissipation, current-dependent |
43.2 W
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
70 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Ambient storage temperature - max |
70 °C
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| Functions |
Voltage release optional
Disconnectors/main switches Interlockable |
E-postayı Gönder
Ürün teknik özellikleri
