Eaton offers a complete range of compact residual current devices for fault current/residual current and additional protection in residential and small commercial applications..
Twin-purpose terminal (lift/open-mouthed) at top and bottom
Can be positioned on busbar at top or bottom
Free terminal space despite installed busbar
Universal tripping signal switch can be retrofitted
Z-HK auxiliary switch can be retrofitted
Contact position indicator red - green
Time-delayed types suitable for use with standard fluorescent lamps, with or without electronic ballast (30 mA-RCD: 30 units per phase conductor; 100 mA-RCD: 90 units per phase conductor)
The installation position does not affect the functioning of the device
Since tripping does not depend on the mains voltage, this RCD is suitable for “fault current/residual current protection” as well as “additional protection” within the meaning of the applicable standards.
Mains connection at either side
The 4-pole device can also be used for 2- or 3-pole connection
Mandatory in systems with surge arresters downstream of the RCD
Reliable protection for machines
These products help maintain an optimal system and provide additional protection against residual earth leakage currents for a wide range of applications. They come with tripping characteristics to cater for variety of electrical systems and components. The devices offer a wide range of nominal currents and comprehensive optional accessories.
Type -A
Protection against special forms of residual pulsating DC currents that have not been smoothed.
Type -S
Type S selective residual current device sensitive for AC current monitoring.