Foto je ilustrační

Download

168984
Kód modelu: S811+T18N3S

Eaton S811 Soft starter, 180 A, 200 - 600 V AC, Us= 24 V DC, with control unit, Frame size T

Technické údaje produktu

Kontaktujte mě ohledně tohoto produktu

Odhad energetických úspor

Specifikace Zdroje

General specifications

Product Name	Eaton S811 Soft starter
Catalog Number	168984
EAN	4015081654697
Product Length/Depth	164.4 mm
Product Height	322.9 mm
Product Width	194.4 mm
Product Weight	18.6 kg
Certifications	UL Category Control No.: NMFT CCC CE UL File No.: E202571 CSA22.2-14-1995 CSA Class No.: 3211-06, 2411-01 GB14048 UL 508 C-Tick CSA IEC/EN 60947-4-2 CSA File No.: LR 353 CSA-C22.2 No. 14 UL
Model Code	S811+T18N3S

Features & Functions

Fault memory	10 Faults
Fitted with:	Internal bypass contacts Internal bypass Motor overload protection Display
Functions	Min. ramp time 1 s - fast switching (semiconductor contactor) Soft start function Underload monitoring Current limitation Potential isolation between power and control sections Suppression of closing transients Suppression of DC components for motors Overload monitoring Single direction
Interfaces	Modbus RTU (built-in)

General information

Class	Adjustable
Connection to SmartWire-DT	No
Degree of protection	IP20 NEMA Other
Frame size	T
Mains voltage - min	200 V
Mains voltage - max	600 V
Mounting position	As required
Overvoltage category	II
Pollution degree	3
Radio interference class	Class A (EN 55011)
Rated impulse withstand voltage (Uimp)	4000 V
Rated insulation voltage (Ui)	660 V
Shock resistance	15 g, Mechanical
Startup class	CLASS 30 (6 x Iₑ for 30 s) CLASS 10 (star-delta replacement) CLASS 20 (heavy starting duty 3 x Iₑ for 45 s)
Suitable for	Branch circuits, not as BCPD, (UL/CSA)
Type	Soft starter for three-phase loads, with control unit
Voltage type	DC

Climatic environmental conditions

Altitude	Max. 2000 m Above 2000 m with 0.5 % derating per 100 m
Ambient operating temperature - min	-30 °C
Ambient operating temperature - max	50 °C
Ambient storage temperature - min	-50 °C
Ambient storage temperature - max	70 °C
Climatic proofing	Damp heat, cyclic, to IEC 60068-2-30 Damp heat, constant, to IEC 60068-2-3

Main conducting paths

Overload cycle	AC-53a: 4.0 - 32: 99 - 3
Rated operational current (Ie) at AC-53	180 A
Rated operational current (Ie) at AC-53, in-delta	311 A
Rated operational voltage (Ue) - min	200 V
Rated operational voltage (Ue) - max	600 V
Short-circuit protection rating	NZMN2-S200, Type “1” coordination, Main conducting paths
Supply frequency	50/60 Hz, fLN, Main circuit
Voltage rating - max	600 V

Motor rating

Assigned motor power at 200/208 V, 60 Hz, 3-phase	60 HP
Assigned motor power at 220/230 V, 60 Hz, 3-phase	60 HP
Assigned motor power at 460/480 V, 60 Hz, 3-phase	150 HP
Assigned motor power at 600 V, 60 Hz, 3-phase	150 HP
Assigned motor power in-delta at 220/230 V, 60 Hz	100 HP
Assigned motor power in-delta at 460/480 V, 60 Hz	250 HP
Assigned motor power in-delta at 575/600 V, 60 Hz	300 HP
Rated operational power at 220/230 V, 50 Hz	55 kW
Rated operational power at 400 V, 50 Hz	90 kW
Rated operational power at 500 V, 50 Hz	110 kW
Rated operational power in-delta at 220/230 V, 50 Hz	90 kW
Rated operational power in-delta at 400 V, 50 Hz	160 kW
Rated operational power in-delta at 500 V, 50 Hz	200 kW

Terminal capacities

Terminal capacity (flexible with ferrule)	1 x (2.5 - 4) mm², Control circuit cables 2 x (1 - 2.5) mm², Control circuit cables 2 x (25 - 240) mm², Main cables 1 x (70 - 240) mm², Main cables
Terminal capacity (solid)	2 x (1 - 2.5) mm², Control circuit cables 2 x (25 - 240) mm², Main cables 1 x (70 - 240) mm², Main cables 1 x (2.5 - 4) mm², Control circuit cables
Terminal capacity (solid/stranded AWG)	1 x (14 - 12), Control circuit cables 2 x (4 - 500 kcmil), Main cables 1 x (4 - 500 kcmil), Main cables 2 x (14 - 12), Control circuit cables
Terminal capacity (stranded)	2 x (1 - 2.5) mm², Control circuit cables 1 x (2.5 - 4) mm², Control circuit cables 1 x (70 - 240) mm², Main cables 2 x (25 - 240) mm², Main cables
Screwdriver size	0.6 x 3.5 mm, Terminal screws, Control circuit cables 4 mm Hexagon socket-head screw, Terminal screw, Main cables
Tightening torque	0.4 Nm, Screw terminals, Control circuit cables 25.5 Nm (≤ 150 mm²) 28.3 Nm (> 150 mm²)

Control circuit

Current consumption	150 mA, Control circuit, Digital inputs, External 24 V 10 A/150 ms, Control circuit, Regulator supply at peak performance (close bypass) at 24 V DC 1000 mA, Control circuit, Regulator supply 100 mA, Control circuit, Digital inputs, External 24 V (no-load)
Drop-out time	100 ms, DC operated
Drop-out voltage	0 - 3 V, DC operated
Pick-up time	100 ms at DC
Pick-up voltage	21.6 - 26.4 V DC
Rated control supply voltage (Us) at AC, 50 Hz - min	0 V
Rated control supply voltage (Us) at AC, 50 Hz - max	0 V
Rated control supply voltage (Us) at AC, 60 Hz - min	0 V
Rated control supply voltage (Us) at AC, 60 Hz - max	0 V
Rated control supply voltage (Us) at DC - min	24 V
Rated control supply voltage (Us) at DC - max	24 V

Input/Output

Input current	4 - 20 mA (Analog inputs)
Number of inputs	1 (current input)
Number of outputs	2 Relay Outputs (programmable)
Output voltage	120 V AC/DC (relay outputs)
Protection	Finger and back-of-hand proof, Protection against direct contact
Rated control voltage (Uc)	24 V DC 24 V DC (-10 %/+10 %)
Rated operational current (Ie) at AC-11	3 A

Soft start function

Application	3-phase motors: Yes Soft starting of three-phase asynchronous motors
Delay time	0 - 60 s, Soft start function, Ramp times
Kickstart	100% (Kickstart voltage) Max. 2000 ms (Kickstart Duration)
Ramp/run-up time	180 s
Start voltage	Max. 85 %, Soft start function, Start voltage = turn-off voltage

Design verification

Equipment heat dissipation, current-dependent Pvid	25 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Rated operational current for specified heat dissipation (In)	180 A
Static heat dissipation, non-current-dependent Pvs	25 W
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

eCAD model

ETN.S811_T18N3S

mCAD model

Výkresy

Poznámka: Pokud v souboru ZIP chybí soubory, pak typ souboru není podporován hromadným stahováním.

Zadejte své město, stát, poštovní směrovací číslo nebo BuyNow.GeolocationIconAlt

Najděte mě

Zobrazit místa, která nabízejí:

Vyzvednutí produktu

Objednat online a odeslat produkt

Distributor	Dostupné množství	Typ umístění	BuyNow.TableColLabelLink

Eaton je společnost zabývající se inteligentním řízením energie, jejímž cílem je zlepšovat kvalitu života a chránit životní prostředí pro obyvatele na celém světě. Řídíme se naším závazkem podnikat správně, pracovat udržitelně a pomáhat našim zákazníkům hospodařit s energií ─ dnes i v budoucnu. Využíváním globálních trendů růstu elektrifikace a digitalizace urychlujeme přechod naší planety na obnovitelnou energii a pomáháme řešit nejnaléhavější světové výzvy v oblasti řízení energie.

168984 Kód modelu: S811+T18N3S