Normprodukter och effektbrytare

The Eaton's PL6 miniature circuit breaker is a protective device equipped with both a thermal and an electromagnetic release that is available in 1-, 2-, 3-, 4-, 1+N and 3+N pole versions. The PL6 is compatible with AC and DC applications up to 48 V with rated currents from 0.16 A to 63 A and is available with tripping characteristics B, C and D. The switching capacity is 6 kA.

Kontakta vårt försäljningsteam

Tillbaka till sökning

Översikt Specifikationer Resurser Support

RATED CURRENTS

up to 63 A

VERSIONS

1-, 2-, 3-, 4-, 1+N and 3+N pole

TRIPPING CHARACTERISTICS

B, C, D

Viktiga egenskaper

Premium miniature circuit breaker for residential and non-residential applications
Current limiting class 3
Back-up fuse with high selectivity, thanks to low let-through energy
Contact position indicator red – green
Tripping characteristics B, C, D
Rated switching capacity 6 kA according to IEC/EN 60898-1
Suitable for DC applications up to 48 V
Complies with the insulation coordination requirements (= distance between the contacts ≥ 4 mm)
Busbar compatible
Lift/claw double terminals at top and bottom
For mounting on busbar at top or bottom, as required
Guide for secure terminal connection
3-position DIN-rail clip to simplify removal from the busbar system
Comprehensive range of accessories, which can also be retrofitted
Switch-grip in rated current color

The most commonly used type of overcurrent protection device

MCBs protect cables against damage due to overload and short circuits: In the event of dangerously high currents, the circuit breaker’s bimetallic thermal release will disconnect the power supply. In the event of a short circuit, the electromagnetic release will disconnect the power supply in a timely manner.

A design that is standard-compliant and quality-tested

Eaton’s PL6 miniature circuit breakers are type-tested and approved according to IEC/EN 60898-1 (VDE 0641-11). Part 1 of IEC/EN 60898 applies to AC MCBs if the rated voltage between the phases does not exceed 440 V, the rated current does not exceed 125 A and the rated breaking capacity does not exceed 25,000 A.

The right MCB for every application

Circuit breakers with tripping characteristic B are the standard MCB type used for lighting and socket circuits. For circuits with high peak currents (such as motor circuits) devices with tripping characteristic C are used. Circuit breakers with tripping characteristic D are used for circuits with inductive and capacitive loads, such as solenoid valves, transformers or motors.

Specifikationer

Filtrera

Sök inom dessa värden

Försök med en annan sökning

Din sökning "" matchade inte några dokument eller produkter.

Nedladdningslänkar

Teknisk support

För teknisk support, fyll i formuläret eller ring +46 (8)-598 940 50 (val 2)

Kataloger

xPole Miniature Circuit Breaker PL6

Protective Devices - xPole Miniature Circuit Breaker PL6 xPole - catalog

(PDF 455 KB , 08/08/2021)

Kontakta teknisk support

Ring teknisk support

08-598 940 50

Utbildning

Garanti

Villkor

Eaton är ett intelligent energihanteringsföretag som verkar för att förbättra livskvaliteten och miljön för människor globalt. Vi styrs av vårt engagemang för att göra affärer på rätt sätt, att verka hållbart och att hjälpa våra kunder hantera energi ─ idag och långt in i framtiden. Genom att dra nytta av globala tillväxttrender för elektrifiering och digitalisering påskyndar vi planetens övergång till förnybar energi och bidrar till att lösa världens mest akuta energihanteringsutmaningar.

PL6 xPole Miniature Circuit Breaker