Eaton Moeller® series M22 Self-monitoring contact elements, Screw terminals, Base fixing, 1 N/O, 1 NC, 24 V 3 A
| Product Name |
Eaton Moeller® series M22 Accessory Contact element
|
| Catalog Number |
121473
|
| EAN |
4015081192915
|
| Product Length/Depth |
48 mm
|
| Product Height |
23 mm
|
| Product Width |
34 mm
|
| Product Weight |
0.022 kg
|
| Certifications |
CSA
UL CE CSA Class No.: 3211-03 CSA File No.: 012528_C_000 UL 508 IEC 60947-5-1 IEC/EN 60947-5 UL File No.: E340491 CSA-C22.2 No. 14-05 UL Category Control No.: NISD CSA-C22.2 No. 94-91 |
| Catalog Notes |
Contacts with safety function, by positive opening to IEC/EN 60947-5-1
|
| Model Code |
M22-KC01SMC10
|
| Electric connection type |
Screw connection
|
| Degree of protection |
IP20
|
| Model |
Top mounting
|
| Mounting method |
Base
Floor fastening |
| Operating torque |
0.8 Nm
|
| Overvoltage category |
III
|
| Pollution degree |
3
|
| Rated impulse withstand voltage (Uimp) |
6000 V AC
|
| Used with |
Modular pushbutton
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
70 °C
|
| Ambient storage temperature - min |
-25 °C
|
| Ambient storage temperature - max |
85 °C
|
| Climatic proofing |
Damp heat, cyclic, to IEC 60068-2-30
Damp heat, constant, to IEC 60068-2-78 |
| Terminal capacity (flexible with ferrule) |
0.5 - 1.5 mm²
|
| Terminal capacity (solid) |
0.75 - 2.5 mm²
|
| Terminal capacity (stranded) |
0.5 - 2.5 mm²
|
| Rated insulation voltage (Ui) |
500 V
|
| Rated operational current (Ie) at AC-15, 115 V |
6 A
|
| Rated operational current (Ie) at AC-15, 220 V, 230 V, 240 V |
6 A
|
| Rated operational current (Ie) at AC-15, 380 V, 400 V, 415 V |
4 A
|
| Rated operational current (Ie) at AC-15, 500 V |
2 A
|
| Rated operational current (Ie) at DC-13, 110 V |
0.6 A
|
| Rated operational current (Ie) at DC-13, 220 V, 230 V |
0.3 A
|
| Rated operational current (Ie) at DC-13, 24 V |
3 A
|
| Rated operational current (Ie) at DC-13, 42 V |
1.7 A
|
| Rated operational current (Ie) at DC-13, 60 V |
1.2 A
|
| Rated operational current (Ie) at DC-13, 500 V |
0.1 A
|
| Rated conditional short-circuit current (Iq) |
1 kA
|
| Short-circuit protection |
PKZM0-10/FAZ-B6/1, Contacts, Max. short-circuit protective device, Fuseless
|
| Short-circuit protection rating |
Max. 10 A gG/gL, Fuse, Contacts
|
| Connection to SmartWire-DT |
No
|
| Connection type |
Base fixing
|
| Actuating force - max |
5 N
|
| Actuator travel and actuation force (DIN EN 60947-5-1) |
4.8 mm
|
| Knob travel |
5.7 mm
|
| Force for positive opening - min |
15 N
|
| Number of contacts (change-over contacts) |
0
|
| Number of contacts (normally closed contacts) |
1
|
| Number of contacts (normally open contacts) |
1
|
| Equipment heat dissipation, current-dependent Pvid |
0 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0.11 W
|
| Rated operational current for specified heat dissipation (In) |
6 A
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Skicka e-post
Produktspecifikationer
