Jisticí a ochranné přístroje

Eaton offers a complete range of compact residual current devices for fault current/residual current and additional protection in residential and small commercial applications. This series covers the full spectrum of compact protection devices for various applications.

Type AC RCDs are suitable for detecting sinusoidal AC fault currents whereas Type A RCDs detect sinusoidal AC fault currents and pulsating DC residual currents up to 6 mA. They can also handle the residual current waveforms often generated in the power supply units of single-phase loads with electronic components.

Kontaktujte mě ohledně tohoto produktu

Zpět na vyhledávání

Přehled Verze Zdroje

Design according to

IEC/EN 61008

SENSITIVITY

AC and pulsating DC currents

RATED CURRENTS

up to 100 A

Základní funkce

Compatible with the other devices from the P series, which can be connected by means of a standard busbar
Twin-purpose terminal (lift/open-mouthed) at top and bottom
Can be positioned at the top or bottom of the busbar, the installation position does not affect the functioning
Free terminal space despite installed busbar
Z-A universal tripping signal switch and Z-HK auxiliary switch can be retrofitted
Contact position indicator red-green
Time-delayed types suitable for use with standard fluorescent lamps, with or without electronic ballast
Line voltage independent RCCB for fault protection, additional as well as fire protection

The different types come with different advantages

Type A: Protection against special forms of residual pulsating DC currents that have not been smoothed.
Type G/A: Additional protection against special forms of residual pulsating DC currents that have not been smoothed. High level of protection against nuisance tripping.
Type S/A: Selective residual current devices. Protection against special forms of residual pulsating DC currents that have not been smoothed.
Type G: High level of protection against nuisance tripping. Mandatory in circuits where nuisance tripping might cause personal injury or property damage.
Type S: Selective residual current device for AC, current monitoring.

Reliable protection for machines

These products help maintain an optimal system and provide additional protection against residual earth leakage currents for a wide range of applications. They come with different tripping characteristics to cater for a variety of electrical systems and components. The devices offer a wide range of nominal currents and comprehensive optional accessories.

Type of protection

Since tripping does not depend on the mains voltage, this RCD is suitable for “fault current/residual current protection” as well as “additional protection” within the meaning of the applicable standards.

Online configurator - design your own customized configurations

The xComfort KLV series and our switching and protection devices are based on a modular design so that you can assemble any combination you need. In addition to a number of standard pre-wired distribution boards, Eaton also supplies customized configurations on request. If you are not yet sure which type of distribution board is the right fit for you, simply fill in our configurator with ordering function.

Access the configurator

Specifikace

Filtry

Vyhledávat v těchto hodnotách

Zkuste nové vyhledávání

Vaše vyhledávání "" neodpovídají žádné dokumenty ani produkty.

Odkazy ke stažení

Aplikační poznámky

RCD Application Guide

Application guide for Residual Current Devices

(PDF 13 MB , 08/03/2021)

Brožury

Fejlstrømsafbryder: Overblik og værd at vide

Få overblik over hvad, hvordan og fordelene ved en fejlstrømsafbryder

(PDF 447 KB , 29/05/2023)

Katalogy

Eaton

xPole PFIM-U - Residual Current Circuit Breaker, Catalog, CA019028EN

(PDF 602 KB , 01/06/2021)
Eaton Protective Devices Catalog

Eaton's range of protective devices

(PDF 7 MB , 08/03/2021)
xPole Controlling&Switching, Busbar systems, Other Accessories

xPole Controlling&Switching, Busbar systems, Other Accessories Catalog, CA019015EN

(PDF 25 MB , 16/12/2022)
xpole pfim - Residual Current Circuit Breaker

xPole PFIM - Residual Current Circuit Breaker, Catalog, CA019027EN

(PDF 759 KB , 08/09/2021)
xpole pfim-x - Residual Current Circuit Breaker

xPole PFIM-X - Residual Current Circuit Breaker, Catalog, CA019029EN

(PDF 648 KB , 05/07/2021)
xPole Protective Devices

xPole Protective Devices Catalog, CA019014EN

(PDF 34 MB , 16/02/2021)

Eaton je společnost zabývající se inteligentním řízením energie, jejímž cílem je zlepšovat kvalitu života a chránit životní prostředí pro obyvatele na celém světě. Řídíme se naším závazkem podnikat správně, pracovat udržitelně a pomáhat našim zákazníkům hospodařit s energií ─ dnes i v budoucnu. Využíváním globálních trendů růstu elektrifikace a digitalizace urychlujeme přechod naší planety na obnovitelnou energii a pomáháme řešit nejnaléhavější světové výzvy v oblasti řízení energie.

xPole PFIM Type AC and A residual current circuit breaker