Foto je ilustrační

197491 - Pokročilé frekvenční měniče PowerXL DA1

197491
Kód modelu: DA1-32072FB-B20C

Eaton DA1 Frequency inverter, 230 V AC, 3-phase, 72 A, 18.5 kW, IP20/NEMA 0, Radio interference suppression filter, Additional PCB protection, DC link choke, FS5

Technické údaje produktu

Kontaktovat obchodní oddělení

Navrženo pro vzájemnou spolupráci

Objevte další produkty a příslušenství společnosti Eaton vyvinuté pro zlepšení tohoto produktu.

Zadejte své město, stát, poštovní směrovací číslo nebo BuyNow.GeolocationIconAlt

Najděte mě

Zobrazit místa, která nabízejí:

Vyzvednutí produktu

Objednat online a odeslat produkt

Distributor	Dostupné množství	Typ umístění	BuyNow.TableColLabelLink

Eaton je společnost zabývající se inteligentním řízením energie, jejímž cílem je zlepšovat kvalitu života a chránit životní prostředí pro obyvatele na celém světě. Řídíme se naším závazkem podnikat správně, pracovat udržitelně a pomáhat našim zákazníkům hospodařit s energií ─ dnes i v budoucnu. Využíváním globálních trendů růstu elektrifikace a digitalizace urychlujeme přechod naší planety na obnovitelnou energii a pomáháme řešit nejnaléhavější světové výzvy v oblasti řízení energie.

Product Name	Eaton DA1 Variable frequency drive
Catalog Number	197491
EAN	4015081940660
Product Length/Depth	261 mm
Product Height	485 mm
Product Width	234 mm
Product Weight	18.2 kg
Certifications	CE EAC IEC/EN 61800-3 UL report applies to both US and Canada IEC/EN61800-3 UkrSEPRO CUL RCM IEC/EN 61800-2 UL File No.: E172143 UL Certified by UL for use in Canada Safety: EN 61800-5-1: 2003 RoHS, ISO 9001 IEC/EN61800-5 UL 508C UL Category Control No.: NMMS, NMMS7
Catalog Notes	The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request.
Model Code	DA1-32072FB-B20C

Cable length	C2 ≤ 5 m, maximum motor cable length 150 m, unscreened, maximum permissible cable length 200 m, unscreened, with motor choke, maximum permissible cable length 200 m, screened, with motor choke, maximum permissible cable length C3 ≤ 25 m, maximum motor cable length 100 m, screened, maximum permissible cable length
Communication interface	Modbus RTU CANopen® SmartWire-DT, optional Ethernet IP, optional OP-Bus (RS485) PROFINET, optional EtherCAT, optional DeviceNet, optional PROFIBUS, optional Modbus-TCP, optional
Connection to SmartWire-DT	Yes In conjunction with DX-NET-SWD1 SmartWire DT module
Degree of protection	IP20 NEMA Other
Electromagnetic compatibility	1st and 2nd environments (according to EN 61800-3)
Fitted with:	Radio interference suppression filter OLED display PC connection IGBT inverter Brake chopper DC link choke Internal DC link Additional PCB protection Control unit Breaking resistance
Frame size	FS5
Functions	4-quadrant operation possible
Mounting position	Vertical
Product Category	Variable frequency drives
Protection	Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
Protocol	PROFINET IO Other bus systems EtherNet/IP MODBUS CAN TCP/IP PROFIBUS DeviceNet
Safety function/level	STO (Safe Torque Off, SIL2, PLc Cat 2)
Suitable for	Branch circuits, (UL/CSA)
Radio interference class	C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary. Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments

Altitude	Above 1000 m with 1 % derating per 100 m Max. 4000 m Max. 1000 m
Ambient operating temperature - min	-10 °C
Ambient operating temperature - max	50 °C
Ambient operating temperature at 150% overload - min	-10 °C
Ambient operating temperature at 150% overload - max	50 °C
Ambient storage temperature - min	-40 °C
Ambient storage temperature - max	60 °C
Climatic proofing	< 95 average relative humidity (RH), no condensation, no corrosion

Efficiency	95.8 % (η)
Heat dissipation at current/speed	200 W at 25% current and 0% speed 260 W at 25% current and 50% speed 280 W at 50% current and 0% speed 370 W at 50% current and 50% speed 510 W at 50% current and 90% speed 650 W at 100% current and 0% speed 760 W at 100% current and 50% speed 870 W at 100% current and 90% speed
Input current ILN at 150% overload	82.9 A
Leakage current at ground IPE - max	0.28 mA
Mains switch-on frequency	Maximum of one time every 30 seconds
Mains voltage - min	200 V
Mains voltage - max	240 V
Operating mode	U/f control Sensorless vector control (SLV) Optional: Vector control with feedback (CLV) Speed control with slip compensation
Output frequency - min	0 Hz
Output frequency - max	500 Hz
Output voltage (U2)	240 V AC, 3-phase 230 V AC, 3-phase
Overload current IL at 150% overload	105 A
Rated control supply voltage	10 V DC (Us, max. 10 mA)
Rated frequency - min	48 Hz
Rated frequency - max	62 Hz
Rated operational current (Ie) at 150% overload	72 A
Rated operational power at 220/230 V, 50 Hz, 1-phase	18.5 kW
Rated operational voltage	240 V AC, 3-phase 230 V AC, 3-phase
Resolution	0.1 Hz (Frequency resolution, setpoint value)
Starting current - max	200 %, IH, max. starting current (High Overload), for 4 seconds every 40 seconds, Power section
Supply frequency	50/60 Hz
Switching frequency	8 kHz, 4 - 24 kHz adjustable (audible), fPWM, Power section, Main circuit
System configuration type	AC supply systems with earthed center point
Voltage rating - max	240 VAC

Assigned motor current IM at 220 - 240 V, 60 Hz, 150% overload	68 A
Assigned motor current IM at 230 V, 50 Hz, 150% overload	72 A
Assigned motor power at 230/240 V, 60 Hz, 1-phase	25 HP

197491
Kód modelu: DA1-32072FB-B20C

General specifications

General

Climatic environmental conditions

Main circuit

Motor rating

Apparent power

Braking function

Control circuit

Design verification

Exportovat specifikaci produktu

Declarations of conformity

eCAD model

Instalační návody

Instalační videa

mCAD model

Uživatelské příručky

Výkresy

Navrženo pro vzájemnou spolupráci

Apparent power at 230 V	28.68 kVA
Apparent power at 240 V	29.93 kVA

Braking resistance	12 Ω
Braking torque	Max. 100 % of rated operational current Ie with external braking resistor - Main circuit Adjustable to 100 % (DC) Max. 30 % MN, Standard - Main circuit
Switch-on threshold for the braking transistor	390 VDC

Number of inputs (analog)	2
Number of inputs (digital)	5
Number of outputs (analog)	2
Number of outputs (digital)	2
Number of relay outputs	2 (parameterizable, 1 N/O and 1 changeover contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
Rated control voltage (Uc)	24 V DC (external, max. 100 mA)

10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

197491 Kód modelu: DA1-32072FB-B20C

General specifications

General

Climatic environmental conditions

Main circuit

Motor rating

Apparent power

Braking function

Control circuit

Design verification

Exportovat specifikaci produktu

Declarations of conformity

eCAD model

Instalační návody

Instalační videa

mCAD model

Uživatelské příručky

Výkresy

Navrženo pro vzájemnou spolupráci

DISKUTUJME O VELKÝCH NÁPADECH

197491
Kód modelu: DA1-32072FB-B20C