198784 | Eaton Rapid Link Speed controller

General specifications

Product Name	Eaton Rapid Link Speed controller
Catalog Number	198784
EAN	4015081968428
Product Length/Depth	157 mm
Product Height	270 mm
Product Width	220 mm
Product Weight	3.59 kg
Certifications	CE UL approval RoHS UL 61800-5-1 IEC/EN 61800-5-1
Catalog Notes	3 fixed speeds and 1 potentiometer speed can be switched over from U/f to (vector) speed control Connection of supply voltage via adapter cable on round or flexible busbar junction Diagnostics and reset on device and via AS-Interface integrated PTC thermistor monitoring and Thermoclick with safe isolation optional: 4 sensor inputs with M12-Y adapter for switchover to creep speed optional: Faster stop if external 24 V fails Two sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operation with AUTO - OFF/RESET - HAND key switches with selector switch REV - OFF - FWD
Model Code	RASP5-4400A31-412R100S1

Features & Functions

Features	Parameterization: Fieldbus Parameterization: Keypad Parameterization: drivesConnect Diagnostics and reset on device and via AS-Interface Parameterization: drivesConnect mobile (App)
Fitted with:	Thermo-click with safe isolation Key switch position OFF/RESET Braking resistance PC connection Manual override switch Key switch position HAND Internal DC link Breaking resistance IGBT inverter Selector switch (Positions: REV - OFF - FWD) Control unit Key switch position AUTO Two sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operation PTC thermistor monitoring
Functions	Brake chopper with braking resistance for dynamic braking 1 potentiometer speed 4-quadrant operation possible 3 fixed speeds

General

Degree of protection	NEMA 12 IP65
Electromagnetic compatibility	1st and 2nd environments (according to EN 61800-3)
Overvoltage category	III
Product category	Speed controller
Protocol	AS-Interface profile cable: S-7.4 for 31 modules ASI
Radio interference class	C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary. C1: for conducted emissions only
Rated impulse withstand voltage (Uimp)	2000 V
System configuration type	AC voltage Center-point earthed star network (TN-S network) Phase-earthed AC supply systems are not permitted.

Ambient conditions, mechanical

Mounting position	Vertical
Shock resistance	15 g, Mechanical, According to IEC/EN 60068-2-27, 11 ms, Half-sinusoidal shock 11 ms, 1000 shocks per shaft
Vibration	Resistance: 57 Hz, Amplitude transition frequency on acceleration Resistance: 6 Hz, Amplitude 0.15 mm Resistance: According to IEC/EN 60068-2-6 Resistance: 10 - 150 Hz, Oscillation frequency

Climatic environmental conditions

Altitude	Above 1000 m with 1 % performance reduction per 100 m Max. 2000 m
Ambient operating temperature - min	-10 °C
Ambient operating temperature - max	40 °C
Ambient storage temperature - min	-40 °C
Ambient storage temperature - max	70 °C
Climatic proofing	In accordance with IEC/EN 50178 < 95 %, no condensation

Main circuit

Current limitation	Adjustable, motor, main circuit 0.4 - 4.3 A, motor, main circuit
Delay time	< 10 ms, On-delay < 10 ms, Off-delay
Efficiency	98 % (η)
Input current ILN at 150% overload	4.1 A
Leakage current at ground IPE - max	3.5 mA
Mains current distortion	120 %
Mains switch-on frequency	Maximum of one time every 60 seconds
Mains voltage - min	380 V
Mains voltage - max	480 V
Mains voltage tolerance	380 - 480 V (-10 %/+10 %, at 50/60 Hz)
Operating mode	Sensorless vector control (SLV) Synchronous reluctance motors U/f control BLDC motors PM and LSPM motors
Output frequency - min	0 Hz
Output frequency - max	500 Hz
Overload current	At 40 °C For 60 s every 600 s
Overload current IL at 150% overload	6.5 A
Rated frequency - min	45 Hz
Rated frequency - max	66 Hz
Rated operational current (Ie)	4.3 A at 150% overload (at an operating frequency of 8 kHz and an ambient air temperature of +40 °C)
Rated operational power at 380/400 V, 50 Hz, 3-phase	1.5 kW
Rated operational voltage	480 V AC, 3-phase 400 V AC, 3-phase
Resolution	0.1 Hz (Frequency resolution, setpoint value)
Starting current - max	200 %, IH, max. starting current (High Overload), For 2 seconds every 20 seconds, Power section
Supply frequency	50/60 Hz
Switching frequency	8 kHz, 4 - 32 kHz adjustable, fPWM, Power section, Main circuit
System configuration type	AC voltage Center-point earthed star network (TN-S network) Phase-earthed AC supply systems are not permitted.

Motor rating

Assigned motor power at 460/480 V, 60 Hz, 3-phase

2 HP

Braking function

Braking current	≤ 0.6 A (max. 6 A for 120 ms), Actuator for external motor brake
Braking torque	Adjustable to 100 % (I/Ie), DC - Main circuit
Switch-on threshold for the braking transistor	765 VDC

Short-circuit rating

Rated conditional short-circuit current (Iq)	10 kA
Short-circuit protection (external output circuits)	Type 1 coordination via the power bus' feeder unit, Main circuit

Control circuit

Rated control voltage (Uc)

24 V DC (-15 %/+20 %, external via AS-Interface® plug)

Communication

Communication interface	AS-Interface
Connection	Plug type: HAN Q4/2
Interfaces	Max. total power consumption from AS-Interface® power supply unit (30 V): 190 mA Number of slave addresses: 31 (AS-Interface®) Specification: S-7.4 (AS-Interface®)

Cable

Cable length

C2 ≤ 5 m, maximum motor cable length
C3 ≤ 25 m, maximum motor cable length
C1 ≤ 1 m, maximum motor cable length

Design verification

10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

198784
Kód modelu: RASP5-4400A31-412R100S1

General specifications

Features & Functions

General

Ambient conditions, mechanical

Climatic environmental conditions

Main circuit

Motor rating

Braking function

Short-circuit rating

Control circuit

Communication

Cable

Design verification

Exportovat specifikaci produktu

Declarations of conformity

eCAD model

Instalační návody

mCAD model

Uživatelské příručky

Výkresy

Navrženo pro vzájemnou spolupráci

198784 Kód modelu: RASP5-4400A31-412R100S1

General specifications

Features & Functions

General

Ambient conditions, mechanical

Climatic environmental conditions

Main circuit

Motor rating

Braking function

Short-circuit rating

Control circuit

Communication

Cable

Design verification

Exportovat specifikaci produktu

Declarations of conformity

eCAD model

Instalační návody

mCAD model

Uživatelské příručky

Výkresy

Navrženo pro vzájemnou spolupráci

DISKUTUJME O VELKÝCH NÁPADECH

198784
Kód modelu: RASP5-4400A31-412R100S1