199389 | Eaton DC1 Variable frequency drive

General specifications

Product Name	Eaton DC1 Variable frequency drive
Catalog Number	199389
EAN	4015081977789
Product Length/Depth	162 mm
Product Height	232 mm
Product Width	161 mm
Product Weight	2.5 kg
Certifications	UL Category Control No.: NMMS, NMMS7 IEC/EN 61800-3 CE UkrSEPRO IEC/EN 61800-5-1 Certified by UL for use in Canada EAC UL 508C UL File No.: E172143 RCM UL report applies to both US and Canada CUL IEC/EN 61800-2 UL CE marking UL Listed CSA-C22.2 No. 14 IEC/EN61800-5 RoHS, ISO 9001
Model Code	DC1-S27D0FN-A66OE1

Features & Functions

Features	Parameterization: Keypad Parameterization: drivesConnect mobile (App) Parameterization: drivesConnect Parameterization: Fieldbus
Fitted with:	Control unit 7-digital display assembly Radio interference suppression filter Additional PCB protection UV resistance Internal DC link IGBT inverter PC connection

General

Cable length	C3 ≤ 25 m, maximum motor cable length C2 ≤ 5 m, maximum motor cable length 75 m, unscreened, maximum permissible, Motor feeder 150 m, unscreened, with motor choke, maximum permissible, Motor feeder 50 m, screened, maximum permissible, Motor feeder C1 ≤ 1 m, maximum motor cable length 100 m, screened, with motor choke, maximum permissible, Motor feeder
Communication interface	OP-Bus (RS485), built in Modbus RTU, built in CANopen®, built in SmartWire-DT, optional
Connection to SmartWire-DT	No
Degree of protection	IP66 NEMA 4X
Electromagnetic compatibility	1st and 2nd environments (according to EN 61800-3)
Frame size	FS1
Mounting position	Vertical
Product category	Variable frequency drives
Protection	Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
Protocol	CAN MODBUS Other bus systems EtherNet/IP
Radio interference class	C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary. Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments C1: for conducted emissions only
Suitable for	Branch circuits, (UL/CSA)

Climatic environmental conditions

Altitude	Max. 4000 m Above 1000 m with 1 % derating per 100 m
Ambient operating temperature - min	-20 °C
Ambient operating temperature - max	40 °C
Ambient storage temperature - min	-40 °C
Ambient storage temperature - max	60 °C
Climatic proofing	< 95 average relative humidity (RH), no condensation, no corrosion

Main circuit

Efficiency	97 % (η)
Input current ILN at 150% overload	9.3 A
Leakage current at ground IPE - max	2.49 mA
Mains switch-on frequency	Maximum of one time every 30 seconds
Mains voltage - min	200 V
Mains voltage - max	240 V
Operating mode	Speed control with slip compensation BLDC motors PM motors U/f control Sensorless vector control (SLV) Synchronous reluctance motors
Output frequency - min	0 Hz
Output frequency - max	500 Hz
Output voltage (U2)	230 V AC, single-phase 240 V AC, single-phase
Overload current IL at 150% overload	10.5 A
Rated control supply voltage	10 V DC (Us, max. 10 mA)
Rated frequency - min	48 Hz
Rated frequency - max	62 Hz
Rated operational current (Ie)	7 A at 150% overload (at an operating frequency of 6 kHz and an ambient air temperature of +40 °C)
Rated operational voltage	230 V AC, 1-phase 240 V AC, 1-phase
Resolution	0.1 Hz (Frequency resolution, setpoint value)
Short-circuit protection rating	15 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
Starting current - max	175 % IH
Supply frequency	50/60 Hz
Switching frequency	8 kHz, 4 - 32 kHz adjustable (audible), fPWM, Power section, Main circuit
System configuration type	AC supply systems with earthed center point
Voltage rating - max	240 V

Motor rating

Assigned motor current IM at 220 - 240 V, 60 Hz, 150% overload	6.8 A
Assigned motor current IM at 230 V, 50 Hz, 150% overload	7 A
Assigned motor power at 230/240 V, 60 Hz, 1-phase	1 HP

Apparent power

Apparent power at 230 V	1.61 kVA
Apparent power at 240 V	1.68 kVA

Braking function

Braking torque

Max. 100 % of rated operational current Ie, variable, DC - Main circuit

Control circuit

Number of inputs (analog)	2
Number of inputs (digital)	4
Number of outputs (analog)	1
Number of outputs (digital)	1
Number of relay outputs	1 (parameterizable, N/O, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))

199389
Kód modelu: DC1-S27D0FN-A66OE1

General specifications

Features & Functions

General

Climatic environmental conditions

Main circuit

Motor rating

Apparent power

Braking function

Control circuit

Exportovat specifikaci produktu

Aplikační poznámky

Declarations of conformity

Instalační návody

Instalační videa

mCAD model

Uživatelské příručky

Výkresy

Navrženo pro vzájemnou spolupráci

199389 Kód modelu: DC1-S27D0FN-A66OE1

General specifications

Features & Functions

General

Climatic environmental conditions

Main circuit

Motor rating

Apparent power

Braking function

Control circuit

Exportovat specifikaci produktu

Aplikační poznámky

Declarations of conformity

Instalační návody

Instalační videa

mCAD model

Uživatelské příručky

Výkresy

Navrženo pro vzájemnou spolupráci

DISKUTUJME O VELKÝCH NÁPADECH

199389
Kód modelu: DC1-S27D0FN-A66OE1